Structura Mac Manuel utilisateur

Stuctura, Inc. |9635 Widmer Rd., Lenexa, KS 66215 |913.390.8787 |www.structura.com

Mac/Mac II

Installation Instructions

Warnings

CAUTION—risk of fire and this product must be installed

in accordance with the applicable installation code by a

person familiar with the construction and operation of the

product and the hazards involved.

Suitable for wet locations.

Mounting orientation must have light source facing down.

Electrical service must be disconnected during installation.

Proper grounding is required to protect against shock and

proper operation.

Tools Required

5/64” Allen wrench for 8-32 set screws

9/16” socket for 3/8” threaded rod assemblies

Philips drive for driver box lid

Wiring tools and connectors

Bollard Installation

Step 1: Turn off power to location.

Step 2: Tighten (4) 8-32 set screws into bollard sides to

allow for LED module and cap removal.

Step 3: Loosen (2) 3/8”-16 thread rod assembly until

baseplate is removable.

Step 4: Attach baseplate to pre-installed 3/8”-16 anchor

bolts. Make sure baseplate is level.

Step 5: Connect power to LED driver in driver

compartment. See page 2 for driver wiring.

Step 6: Place bollard upright onto baseplate.

Step 7: Retighten threaded rod to secure bollard body to

baseplate.

Step 8: Place LED module and cap back into top of bollard

and secure by looseninng set screws.

Step 9: Turn power back on.

8-32 x 1”

Set Screw

3/8”-16

Threaded Rod

3/8”-16

Coupling Nut

Driver

Compartment

LED Module

Step 2

Stuctura, Inc. |9635 Widmer Rd., Lenexa, KS 66215 |913.390.8787 |www.structura.com

Mac/Mac II

Installation Instructions

10"

5.5"

Bollard Wiring

Step 1: Connect input power to driver pigtail as shown

above.

Step 2: Connect dimming wires to remote dimmer (by

others) if applicable.

Step 3: Connect grounding wire to ground pigtail attached

to driver box tray.

LED Module

AC/N (White)

AC/L (Black)

Input

100-277V 18-54V

Dim+ (Purple)

Dim- (Grey)

Ground

Connected to

Bollard Frame

Base Detail

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels structura Éclairage extérieur

structura

structura Duo Bollard Manuel utilisateur

Manuels Éclairage extérieur populaires d'autres marques

Sealey

Sealey LED37 Manuel utilisateur

nordlux

nordlux VEJERS Guide de l'utilisateur

SImx

SImx ELITE LED LHTC637 Manuel utilisateur

GEV

GEV CAROLINE 10833 Manuel utilisateur

NEBO

NEBO NEB-LSP-0020 Manuel utilisateur

WE-EF

WE-EF PFL540 LED Manuel utilisateur

Lindby

Lindby 9949029 Manuel utilisateur

HEPER

HEPER DOGO Side LW6048.585-US Instructions d'installation et d'utilisation

HEPER

HEPER LW8034.003-US Instructions d'installation et d'utilisation

Maretti

Maretti VIBE S 14.6080.04.A Manuel utilisateur

BEGA

BEGA 84 253 Manuel

HEPER

HEPER MINIMO Instructions d'installation et d'utilisation

LIGMAN

LIGMAN BAMBOO 3 Manuel utilisateur

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuel utilisateur

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuel utilisateur

urban ambiance

urban ambiance UQL1273 Manuel utilisateur

TotalPond

TotalPond 52238 Manuel utilisateur

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuel utilisateur

structura Mac Manuel utilisateur

Manuels Éclairage extérieur populaires d'autres marques