Stiga SILENT 33 Manuel utilisateur

DEUTSCH D

Silent 33

8211-3413-04

SVENSKA

∅160 mm

133 2

∅130 mm

3 = 40 mm

4 = 50 mm

2 = 30 mm

1 = 20 mm 51

SVENSKA S

8. 9.

230 V

ABC

36 mm 19 mm

10. 11.

ENGLISH GB

SYMBOLS

The following symbols are displayed on the ma-

chine in order to remind you about the safety pre-

cautions and attention necessary when using the

machine.

The symbols mean:

Warning! Read the Instruction Book and

Safety Manual before using the machine.

Warning! Keepspectatorsaway. Beware of

objects being flung out.

Warning! Take out the safety key before

any type of maintenance is carried out.

Warning! Do not put hands or feet under

thecover of the machinewhen it isrunning.

Warning! The blades continue to rotate

even after the machine has been switched

off.

When a red lamp lights up on the mower’s

control panel and/or a sound signal is acti-

vated, take out the safety key.

ASSEMBLY

WHEELS/CUTTING HEIGHT (fig. 1)

1. Insert the wheel bolt A in the hub cap B.

2. Snap-on the centre cup C.

3. Place abushing on each sideof thewheels (only

the back wheels).

4. Fit the wheel in one of the fixing plate's fourpo-

sitions.

5. Tighten securely by hand using the finger-grip

holes in the hub cap.

Note! The same cutting height should be set on all

four wheels.

STEERING (fig. 2)

1. Insert the tubes into the ends of the handlebar.

2. Fit the screws. Tighten securely.

3. Insert the ends of the U tubeinto theholes inthe

chassis.

4. Fit the screws. Tighten securely.

5. Attach the handle to the U tube using the bolts,

washers and locking knobs provided. The han-

dlebar can be folded forwards by undoing the

locking knobs slightly. This reduces the space

the mower takes up during transport, etc.

6. Secure the electrical cable into the cable holder.

7. Fix the electrical cable using a cable tie.

GRASS COLLECTOR (fig. 3)

1. Snap-together the grass collector's upper and

lower parts.

2. Open the cover on the machine and hook the

grass collector onto the chassis.

Note! The lawn mower can be used without the

grass collector. The grass will then collect in a

bead behind the machine.

BATTERY

GENERAL

Before starting the mower for the first

timeand after winterstorage,you should

charge the battery for 1 - 2 days other-

wise the battery can be damaged.

In order for the battery to maintain its

capacity and to give optimum perform-

ance, it is important that the charging

and storage instructions are carefully fol-

lowed.

• The battery used in this machine is a lead-acid

type battery. This type of battery must always

be stored fully charged.

• Always charge the battery indoors, in a garage,

etc. where the battery is dry and protected from

the weather.

• Only charge the battery when the temperature is

at least 0°C and not over +40°C. Charging in

lowerorhighertemperaturescandamagethe

battery.

STOP

ENGLISH GB

• Always keep the mower battery away from wa-

ter, sources of heat (ovens, radiators, open fires,

etc.) and hazardous chemicals.

• Always use the accompanying genuine Stiga

charger. Never use the charger for any other

product.

• Never use the charger if itis damaged in any way.

A damaged lead or charger should immediately

be replaced at an authorised service workshop

• Take care of the leads. Never carry the charger

by the lead. When chargingis complete pull out

the plug not the lead. If an extension cable is

used, use a robust sort suitable for outdoor use,

even if the battery is never charged outdoors.

• The charger always feels warm to touch, during

the first hours of charging.

CHARGING BEFORE WINTER

STORAGE

The battery should always be stored ful-

ly charged.

1. Take the battery out of the mower.

2. Carefully wipe off the battery.

3. Store the battery outside of the mower in a dry

and cool place.

USING THE MOWER

STARTING/STOPPING THE MOWER

Keep hands and feet well away from the

rotating blade(s). Never put your hand

or foot under the blade casing or in the

grass ejector unit while the motor is

running.

1. Fix the battery in place in the mower (fig. 6).

2. Insert the safety key into the control panel (fig.

7). When the safety key is in place, the green

lamp willbe lit. If it is not, check that the engine

protection onthe safety key ispressed in (fig. 8)

and that the battery is fully charged.

3. Press down the handle to lift the front wheels off

thegrass,therebyreducinggrassresistanceinthe

starting moment.

4. Press in the power on/off button 1(fig. 9). Start

the engine by pressing in the safety handle 2.To

stop, release the safety handle.

After finishing mowing:

1. Removethesafetykeyandkeepitoutofreach

of children.

2. Clean the mower (see the “Maintenance” sec-

tion under the heading “Cleaning”).

3. Recharge the battery once it has cooled down

(after about 30 minutes).

If the safety handle has stopped work-

ing, remove the safety key and take the

mower to an authorised service work-

shop to be repaired.

CONTROL PANEL (fig. 5)

The control panel has the following functions:

1. It includes the socket for the safety key. The safe-

ty key also has an in-built engine protection. If

the engine protection has been activated, remove

the safety key and reset the engine protection

(fig.8).

2. It includes three lamps which indicate the bat-

tery’s charge level:

AGreen = the battery is charged to between 30%

and 100% of full capacity.

CHARGING INSTRUCTIONS

The battery must always be charged

directlyafter finishingmowingandas

soon as it has cooled down (after

about 30 minutes).

1. Charge the battery outside of the mower in a

dry and cool place.

2. Firstconnecttheroundplugfromthechargerto

the battery (fig. 4).

3. Then connect the charger to a wall socket

(~220/230V).

4. Chargefor 1- 2 days, depending on howlong

the machine has been used. Whilst thebattery

ischarging,theredcharginglamponthebat-

tery is continuously lit, for as long as the bat-

tery charger is connected

5. Finishcharging by firstly pullingoutthe plug

from the wall socket.

If the charger is first removed from

the battery, the plug leads can short-

circuitiftheycomeintocontactwith

conductive material.

ENGLISH GB

BYellow = the battery’s power has reduced. Be-

tween 5% and 30% remains.

CRed = 5% or less of the battery power remains.

The machine will begin to beep and will switch

itself off automatically. Stop mowing and re-

charge the battery once ithas cooled down(after

about 30 minutes). Do not use the mower again

until the battery is fully charged.

Important: do not allow the battery power to com-

pletelyrundownasthismaydamagethebatteryand

shorten its operational life.

MOWING TIPS

For best cutting results and to ensure that the bat-

tery lasts as long as possible, the following rules

should be followed:

• Drive the mower at a slow and even pace

• Try to avoid excessive starting and stopping, as

this draws a lot of current.

• Make surethat the motor isrunning at full speed

at all times when mowing.

• Mow regularly and often, especially when the

grass is growing quickly. Donotmowmore than

a third of the total height of the grass during one

mowing session.

• Always use a sharp blade.

• Do not use the mower when it is raining or when

the grass is wet.

• Make surethat the underside ofthe cutting deck

is kept clean.

MAINTENANCE

Take out the safety key and remove the

batterybeforeanytypeofmaintenanceis

carried out.

CLEANING

The mower should be cleaned after each use. Use a

moistened cloth or sponge and a mild soap solution.

Do not clean with water or solvents. Remove all

grass clippings which might have gathered on the

underside of the deck and in the ejector.

The grass collector, although not the mower it-

self, can be cleaned with water. Grass collection ef-

ficiency is reduced if the holes are blocked.

CHANGING THE BLADE

Check,beforeandaftereachuse,thatthe

blade is tightly fixed and that it is not

damaged. A bent or damaged blade

should immediately be replaced. Use pro-

tective gloves to avoid cutting injuries.

Blunt and/or damaged blades tear off the grass and

make the lawn look ugly after mowing. New, well-

sharpened blades cut off the grass and ensure that it

looks green and fresh after it has been mown.

Remove the battery. Put the accompanying wrench

(36 mm) on the hexagon holder. Loosen the blade

nut with an adjustable wrench or another type of

fixed wrench (19 mm) (fig. 10). Turn the blade nut

in an anti-clockwise direction in order to remove the

blade.

Fit the new blade and refit all the other parts exactly

as they were before they were dismantled, see fig.

10. Tighten the blade nut fully.

SHARPENING THE BLADE

Water grinding with whetstone or a grinding stone

should be used to sharpen the blade.

For safety reasons, the blade should not be sharp-

ened on an emery wheel. Too high a temperature

can result in the blade becoming brittle.

If the blade is sharpened, it must be bal-

anced afterwards to avoid vibration

damage (fig. 11).

ENGLISH GB

Problem Possible causes

1. Mower does not start when safety

key is inserted and the safety han-

dle is pressed in

A. Check to make sure the safety key has been properly inserted and that the

engine protection is pressed in.

B. Remove safety key, turn mower over on side and check that blade is not

obstructed.

C. Is battery fully charged? Plug in charger and check lamps.

2. Mower stops while mowing (for

reason other than releasing the

safety handle).

A. The engine protection in the safety key has cut off power to protect

engine. Wait a couple of seconds for it to cool and then press in the

engine protection.

B. Remove safety key. Turn mower over and check that blade is free to turn.

Also check deck and ejector for clogging.

C. Mover is trying to cut too much grass. Raise it to higher cutting height

and try to start again.

D. Check to see if battery needs to be recharged.

3. Mower vibrates excessively or

makes excessive noise. A. Remove safety key. Turn mower over to check if blade is properly tight-

ened.

B. Remove safety key. Turn mower over to check if blade has been bent,

damaged or worn out. Replace with an original blade.

C. Remove safety key. Turn mower over to check mower deck for damage.

If damaged, contact an authorised service dealer.

D. If no visible damage to mower or blade, return mower to an authorised

service dealer.

4. Mower runs but cutting perform-

ance is unsatisfactory and/or there

is a loss of power while mowing.

A. Was battery fully charged at the start?

B. Remove safety key. Turn mower over to check if:

-blade is correctly attached.

-blade is sharp.

-blade is bent, loose or damaged.

-deck and/or ejector and/or grass collector are clogged

C. Cutting height may be set too low, causing heavy strain on motor by try-

ing to cut too much grass. Raise to a higher cutting position.

5. Mower is hard to push. A. Mower is trying to cut too much grass (See problem 4, Cause C.)

B. Remove safety key. Turn mower over to check if all wheels rotate freely

and check them for damage. Obtain original replacement wheels from an

authorised service dealer.

6. Mower engine will not stop when

the safety handle is released. A. Remove safety key to shut off motor. Mower can not then be started.

Contact an authorised service dealer.

7. Mower cannot finish cutting the

lawn on a single charge any more. A. Was battery fully charged at the start?

B. Mower is trying to cut too much grass (See problem 4, Cause C.)

C. Contact an authorised service dealer for battery check.

8. Mower (in grass collection mode)

is collecting grass poorly. A. Grass collector is full.

B. Remove safety key. Turn mower over and check deck and ejector for

clogging.

C. Is the right blade attached? Is the blade sharp?

9. Red lamp on charger does not

come on when charger is plugged

into wall outlet.

A. Wall outlet does not have power. (Verify with another electric device.)

B. The charger fuse may need to be replaced. Contact an authorised service

dealer

C. Charger or cord may be defective. Contact an authorised service dealer.

If the mower still doesn't work, despite measures taken according to this table, contact an authorised service dealer.

Table des matières

Autres manuels Stiga Tondeuse à gazon

Stiga

Stiga PRO 20 8211-0276-02 Manuel utilisateur

Stiga

Stiga Park Senator Manuel utilisateur

Stiga

Stiga COMBI Manuel utilisateur

Stiga

Stiga DECK PARK 121 M - 4WD Manuel utilisateur

Stiga

Stiga MJ 66 Manuel utilisateur

Stiga

Stiga Park series Manuel utilisateur

Stiga

Stiga Park series Manuel utilisateur

Stiga

Stiga READY 85 M Manuel utilisateur

Stiga

Stiga MP 84 Series Manuel utilisateur

Stiga

Stiga Performance Power 350 Manuel utilisateur

Stiga

Stiga 107 M HD Manuel utilisateur

Stiga

Stiga MULTICLIP 51S Manuel utilisateur

Stiga

Stiga MPST 84 Li 48 V1 Manuel utilisateur

Stiga

Stiga SRSA01 Manuel utilisateur

Stiga

Stiga Park 320 Manuel utilisateur

Stiga

Stiga P 901 CH Series Manuel utilisateur

Stiga

Stiga Combi 340c Manuel utilisateur

Stiga

Stiga CP1 480 Li D48 Manuel utilisateur

Stiga

Stiga SENATOR Manuel utilisateur

Stiga

Stiga MULTICLIP 50 S Manuel utilisateur

Stiga

Stiga T 300 Li 20 Series Manuel utilisateur

Stiga

Stiga PARK 121 M Manuel utilisateur

Stiga

Stiga Villa 2WD Series Manuel utilisateur

Stiga

Stiga RECYCLING VE32 Manuel utilisateur

Manuels Tondeuse à gazon populaires d'autres marques

RHINO

RHINO 1958 Manuel utilisateur

Wolf Garten

Wolf Garten Compact plus 40 B Manuel utilisateur

Cub Cadet

Cub Cadet LTX 1045 Manuel utilisateur

Craftsman

Craftsman 917.378461 Manuel utilisateur

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur

Challenge

Challenge CH18V2 Instructions de fonctionnement

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuel utilisateur

DEWEZE

DEWEZE ATM-725 Manuel d'utilisation

Weed Eater

Weed Eater 180083 Manuel utilisateur

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuel utilisateur

Better Outdoor Products

Better Outdoor Products Quick Series Manuel utilisateur

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuel d'utilisation

MTD

MTD 795, 792, 791, 790 Manuel utilisateur

Toro

Toro Groundsmaster 3505-D Manuel utilisateur

Dennis

Dennis FT 610 Manuel utilisateur

AIRFORCE

AIRFORCE F-15 Gen 3 Manuel utilisateur

MTD

MTD 126-220-000 Manuel utilisateur

Toro

Toro 74806 Manuel utilisateur