StarTech.com DuraView RACKCONS1708 Manuel utilisateur
Manual Revision: 03/28/2012
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
RACKCONS1708
RACKCONS1716
RACKCONS1908
RACKCONS1916
RKCONS1708GB
RKCONS1716GB
RKCONS1908GB
RKCONS1916GB
RKCONS1708EU
RKCONS1916EU
1U 17” & 19” Rackmount LCD Console
with 8 & 16 Port KVM Switch
*actual product may vary from photos
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
i
Table of Contents
Introduction ............................................................................................1
Packaging Contents ................................................................................................................................. 1
Installation and Usage...........................................................................2
Hardware Guide ......................................................................................................................................... 2
Connecting the Console/Module.........................................................6
Connecting computers to the module ...............................................8
Module Operation ..................................................................................13
Specications ..........................................................................................21
Technical Support ..................................................................................22
Warranty Information ............................................................................22
Instruction Manual
1
Introduction
Thank you for purchasing a StarTech.com LCD Rack Console with KVM. This product
combines an LCD Console with 17” monitor, with a 16-port KVM switch, allowing you to
manage multiple computers using an integrated keyboard, mouse, and TFT screen that
slides into a compact 1U of rack space when not in use.
Packaging Contents
• 1x 1U LCD Rack Console Drawer
• 1x 1U Multi-Platform KVM Switch
• 1x Mounting Rails - Set
• 1x Mounting Brackets
• 1x Power Adapter
Instruction Manual
2
Installation and Usage
Keys (2) Screw Kit
Mounting Brackets (2)
Side Rails with Front and Rear Brackets (2)
Module - Rear Panel
Module - Front Panel
Hardware Guide
Please note: RACKCONS1716 is comprised of two distinct components - a
Rackmountable Console and a Rackmountable KVM Module, as illustrated
below. The two devices are attached via a Centronics connector on the Rear
panel of the Console and similarly the front panel of the Module.
Instruction Manual
3
Console - Front View (open)
Mounting the Console
1. Loosen the rear screws (pre-installed in side rails) and adjust the
length of the rear bracket to t the depth of your cabinet:
2. Install the rail into the cabinet:
Instruction Manual
4
3. Tighten the screws that were loosened in Step 1:
4. Install the remaining rail, repeating Steps 1-3.
5. Slide the Module onto the Console side rails, connecting the Module and
Console using the male Centronics connector provided by the Console, and the
female Centronics connector provided by the Module. Ensure the connection is
secure, and that the module is rmly seated within the Console side rails.
6. Gently, but rmly insert the Console (with Module attached) into the left and
right rails:
7. Unlock the console, and pull the left and right rail-lock switches towards you
simultaneously, and hold them in this position while pushing the console into
the cabinet:
Rail Lock Switch
Instruction Manual
5
1. Install three screws on each side of the console:
2. Installation is now complete:
Instruction Manual
6
Connecting the Console/Module
To connect the KVM Console/Module to a computer, perform the following steps:
1. Remove the four screws from both sides of the KVM console. Be sure to retain
these screws for the next installation step.
2. Attach the mounting brackets to both sides of the KVM console, using the screws
removed in step 1.
Instruction Manual
7
3. From the rear of the cabinet, slide the KVM console onto the mounting rails.
4. Install one screw on each side of the console (as depicted below).
Autres manuels pour DuraView RACKCONS1708
2
Ce manuel convient aux modèles suivants
9
Table des matières
Manuels Terminal tactile populaires d'autres marques
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Manuel utilisateur
Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur
Heisei Electronics
Heisei Electronics Q-POS 815 Manuel utilisateur
Amano
Amano MTX-15 Manuel utilisateur
FLOWBIRD
FLOWBIRD CWT Compact Touch Manuel utilisateur
Demco
Demco SP7 Manuel utilisateur
