StarTech.com USB2HDCAPS Manuel utilisateur

Manual Revision: 04/24/2015

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

USB2HDCAPS

HDMI® or Component Standalone

Capture Device – 1080p

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Product Diagram ....................................................................................1

Front View .................................................................................................................................................... 1

Rear View...................................................................................................................................................... 1

Introduction............................................................................................2

Packaging Contents ................................................................................................................................. 2

System Requirements.............................................................................................................................. 2

Standalone Operation...........................................................................3

PC Operation...........................................................................................3

Hardware Installation .............................................................................................................................. 3

Software Installation .............................................................................4

Software Operation ...............................................................................7

Launching Application............................................................................................................................ 7

Application Operation............................................................................................................................. 7

Network Streaming Operation.............................................................9

Technical Support ..................................................................................10

Warranty Information............................................................................10

Instruction Manual

Product Diagram

Front View

Rear View

1. RCA Audio Input Port

2. Component Video Input Port

3. HDMI Audio/Video Input Port

4. USB 2.0 Port

1. HDMI Audio/Video Output Port

2. LAN Port

3. Mode Switch

4. SD SLOT

5. Record Button

Instruction Manual

Introduction

Packaging Contents

• 1 x Capture Device

• 1 x USB 2.0 Cable

• 1 x HDMI Cable

• 1 x Driver CD

• 1 x Instruction Manual

System Requirements

For Standalone Operation:

• SD Card

For PC Operation:

• Computer system with:

• Available USB 2.0 port

• Microsoft® Windows 8/8.1 (32/64bit) / 7 (32/64bit) / Vista (32/64bit)

Note: The USB2HDCAPS product will not record digitally encrypted content.

Instruction Manual

Standalone Operation

1. Insert your SD Card into the SD slot.

2. Connect the included USB 2.0 Cable from the USB 2.0 Port on the USB2HDCAPS

to any USB power source.

3. Set the Mode Switch to Standalone Operation.

4. Using the required audio/video cabling (HDMI cable not included), connect your

audio/video source (DVD, DVR, VCR, etc.) to the USB2HDCAPS using either the

HDMI input port or the Component video / RCA Audio input ports, depending

on your audio/video source.

5. (Optional) If you would like to connect a live HDMI display to view what is being

captured, connect an HDMI cable (not included) from the HDMI audio/video

output port on the USB2HDCAPS to an HDMI display.

6. When you are ready to record the audio/video source, press the Record Button on

the USB2HDCAPS to begin the recording process.

7. When you are ready to stop recording the audio/video source, press the Record

Button a second time.

8. Once the recording process has completed, each video clip will be saved on your SD

card in M2TS format.

PC Operation

Hardware Installation

1. Using the included USB 2.0 cable, connect the USB2HDCAPS to an available USB

port on your computer system.

2. Set the Mode Switch to PC Operation.

Instruction Manual

3. Using the required audio/video cabling (HDMI cable not included), connect your

audio/video source (DVD, DVR, VCR, etc.) to the USB2HDCAPS using either the

HDMI input port or the Component video / RCA Audio input ports, depending

on your audio/video source.

4. (Optional) If you would like to connect a live HDMI display to view what is being

captured, connect an HDMI cable (not included) from the HDMI audio/video

output port on the USB2HDCAPS to an HDMI display.

5. Hardware installation is now complete.

Software Installation

Note: Please ensure the Hardware Installation steps have been completed prior to

beginning the Software Installation steps.

After Hardware Installation, the “Found New Hardware Wizard” will open. Click

“Cancel” to close the window.

1. Download the latest drivers from StarTech.com.

2. Locate the Setup(.exe) application. This le will be located in the Windows directory

in the downloaded folder.

3. Double click the Setup(.exe) to begin software installation. If a Windows Security

dialog box appears, click the “Run”or “Install this driver software anyway” button to

proceed.

Instruction Manual

4. Select Quick Installation from the menu that appears. The installation will begin.

5. Select Typical Installation and click Install.

Instruction Manual

6. You will receive a request to start HiVision HD Capture. Click the Start button to

continue.

7. You will be asked to select a language for installation. Select your desired language

and click OK.

8. Follow the prompts to complete the VivaStation installation. When prompted to,

click Finish.

Note: You will be required to restart your computer.

Instruction Manual

Software Operation

Launching Application

1. Once installation is complete, an icon will be created on your desktop called

“VivaStation.” Click this icon to launch the software.

2. Upon launching the software, you will be prompted to select the device and the

source to import. Select “HD Capture Device” as the device. For the source input,

select the type of device that you are capturing (HDMI, Component, etc.).

3. You will now see your video source displayed in the VivaStation window.

Application Operation

The Option Bar at the bottom of the VivaStation window allows for many user

adjustments. These adjustments are outlined below:

Record

To record video to your computer, click the red Record button.

Note: To stop recording, click the red Record button again.

SnapShot

To take a screenshot of the video source on your computer, click the SnapShot button.

Ration

To toggle between available Aspect Rations, click the Ration button.

Autres manuels pour USB2HDCAPS

Table des matières

Autres manuels StarTech.com Changer

StarTech.com

StarTech.com SV431HU34K6 Manuel utilisateur

StarTech.com

StarTech.com STARVIEW SV215MICUSBA Manuel utilisateur

StarTech.com

StarTech.com ST7300USBME Manuel utilisateur

StarTech.com

StarTech.com ST4100USB Manuel utilisateur

StarTech.com

StarTech.com StarView SV231USBGB Manuel utilisateur

StarTech.com

StarTech.com POEEXT2GAT Manuel utilisateur

StarTech.com

StarTech.com SV221MICRO Manuel utilisateur

StarTech.com

StarTech.com IES101002SFP Manuel utilisateur

StarTech.com

StarTech.com ICUSB23216F Manuel utilisateur

StarTech.com

StarTech.com ST4202USB Manuel utilisateur

StarTech.com

StarTech.com MSTMDP122DP Manuel utilisateur

StarTech.com

StarTech.com STARVIEW SV1631DUSB Manuel utilisateur

StarTech.com

StarTech.com MSTCDP122HD Manuel utilisateur

StarTech.com

StarTech.com VS221VGA2HD Manuel utilisateur

StarTech.com

StarTech.com ST121HDBTSC Manuel utilisateur

StarTech.com

StarTech.com ICUSB2322I Manuel utilisateur

StarTech.com

StarTech.com SV231U3A Manuel utilisateur

StarTech.com

StarTech.com HB30A3A1CST Manuel utilisateur

StarTech.com

StarTech.com HB20A7AME Manuel utilisateur

StarTech.com

StarTech.com KVM SWITCHBOX VGA DS15H954 Manuel utilisateur

StarTech.com

StarTech.com SV231DPDDUA Manuel utilisateur

StarTech.com

StarTech.com SV841DUSBI Manuel utilisateur

StarTech.com

StarTech.com IES101002SFP Manuel utilisateur

StarTech.com

StarTech.com 5G7AIBS-USB-HUB-EU Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur