StarTech.com HSB43SATSASB Manuel utilisateur

Manual Revision: 09/25/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/HSB43SATSASB.

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

HSB43SATSASB

4-Bay 3.5” SATA/SAS Mobile Rack for 3

5.25” Bays - Trayless

*actual product may vary from photos

Instruction manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction manual

Table of Contents

Product diagram ....................................................................................1

Front view .................................................................................................................................................... 1

Rear view...................................................................................................................................................... 2

Package contents ...................................................................................3

Requirements .........................................................................................3

About the LED indicators......................................................................3

Install the mobile rack...........................................................................4

Install a hard drive .................................................................................5

Remove a hard drive..............................................................................5

Technical support...................................................................................6

Warranty information............................................................................6

Instruction manual

Product diagram

Front view

1. Door latch

2. Door

3. Power LED

4. Activity LED

Instruction manual

Rear view

1. Drive #1 fan/LED connector

2. Drive #2 fan/LED connector

3. Drive #3 fan/LED connector

4. Drive #4 fan/LED connector

5. Drive #1 SATA power connector

6. Drive #1 SATA data connector

7. Drive #2 SATA power connector

8. Drive #2 SATA data connector

9. Drive #3 SATA power connector

10. Drive #3 SATA data connector

11. Drive #4 SATA power connector

12. Drive #4 SATA data connector

13. Fan

Instruction manual

Package contents

• 1 x mobile rack

• 4 x SATA cables

• 4 x LP4 to SATA and LED power cable adapters

• 2 x SATA to SATA and LED Y power cable adapters

• 8 x installation screws

• 1 x quick-start guide

Requirements

• 1 x computer system with up to four SATA connections and three 5.25” bays

• 4 x SATA or LP4 power connections

• Up to four 3.5”SATA/SAS hard drives

Requirements are subject to change. For the latest requirements, please visit

www.StarTech.com/HSB43SATSASB.

About the LED indicators

There are two LED indicators located on the front of the mobile rack, to the left of each

of the four Doors.

LED LED behavior Signicance

Power LED, green LED is illuminated Hard drive is

receiving power

Activity LED, red LED is blinking Computer system is

accessing the hard drive

Instruction manual

Install the mobile rack

Warning! Always handle storage devices with caution. Make sure that you’re properly

grounded by wearing an anti-static strap when you install any computer component.

If an anti-static strap isn’t available, touch a large, grounded metal surface for several

seconds to discharge any built-up static electricity.

1. Turn o your computer and any devices or peripherals that are connected to it.

2. Unplug the power cable from the back of your computer.

3. Disconnect any peripheral devices that are connected to your computer.

4. Open your computer case. For more information about how to do this, consult the

documentation that came with your computer system.

5. Remove the covers from three linked empty 5.25” drive bays.

6. Insert the mobile rack into the drive bay slots and make sure that the installation

holes on the rack are aligned with the holes in the drive bays.

7. If necessary, use the provided screws to secure the mobile rack to the drive bays.

8. To connect the mobile rack to the computer’s power supply, do one of the

following:

• Connect the LP4 to SATA and LED power cable adapters to the SATA power

connectors on the mobile rack and to the power supply.

• Connect the SATA to SATA and LED Y power cable adapters to the SATA

power connectors on the mobile rack and to the power supply.

9. Connect the LED cables to the Drive fan/LED connectors on the mobile rack.

10. Connect the four SATA cables to a SATA host port on the motherboard and to the

SATA data connectors on the mobile rack.

11. Place the cover back onto your computer case.

12. Reconnect the power cable to the back of your computer.

13. Reconnect any devices or peripherals that were connected to your computer.

14. Turn on your computer.

Note: To help to reduce the chance that dust and debris will get into the mobile rack,

you should keep the Doors shut when not in use.

Instruction manual

Install a hard drive

Warning! Drives should be handled carefully, especially when you transport them. If

you’re not careful with your drives, you may experience lost or corrupted data.

1. Use the Door latches to open the Doors on the mobile rack.

2. Position the hard drive so that the label faces upwards and the rear panel of the

hard drive is aimed towards the inside of the computer.

3. Gently push the hard drive into the mobile rack.

4. Close the Door on the mobile rack and make sure that it clicks shut.

Warning! Do not forcibly close the Door on the mobile rack. If you encounter

resistance when you try to close the Door, the hard drive could be inserted incorrectly.

Remove the hard drive and make sure that it’s inserted correctly.

5. Repeat steps 1 to 4 to install additional hard drives.

Note: When the mobile rack is receiving power, the drives installed in the rack aren’t

impacted if you install or remove hard drives.

Remove a hard drive

Warning! If the Activity LED on the front of the mobile rack is blinking, do not remove

the hard drive. Wait until the LED stops blinking and then remove the hard drive from

the mobile rack.

1. Use the Door latches to open the Doors on the mobile rack.

2. Slowly pull the hard drives out of the mobile rack.

3. Close the Doors on the mobile rack.

Note: When the mobile rack is receiving power, the drives installed in the rack aren’t

impacted if you install or remove hard drives.

Instruction manual

Technical support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship

for the periods noted, following the initial date of purchase. During this period,

the products may be returned for repair, or replacement with equivalent

products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From

the latest technology to legacy products — and all the parts that bridge the old and

new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need

to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to

the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and

to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology

parts. StarTech.com was founded in 1985 and has operations in the United States,

Canada, the United Kingdom and Taiwan servicing a worldwide market.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels StarTech.com Support et étagère

StarTech.com

StarTech.com WALLSHELF4U Manuel utilisateur

StarTech.com

StarTech.com ARMSTSCP2 Manuel utilisateur

StarTech.com

StarTech.com RK919WALLO Manuel utilisateur

StarTech.com

StarTech.com RK4242BK24 Manuel utilisateur

StarTech.com

StarTech.com DSIGNAGESTND Manuel utilisateur

StarTech.com

StarTech.com ARMDUAL Manuel utilisateur

StarTech.com

StarTech.com RK12WALLOA Manuel utilisateur

StarTech.com

StarTech.com APLVESAMNTP Manuel utilisateur

StarTech.com

StarTech.com ARMPIVOT2USB3 Manuel utilisateur

StarTech.com

StarTech.com RK1236BKF Manuel utilisateur

StarTech.com

StarTech.com SATDOCK2520 Manuel utilisateur

StarTech.com

StarTech.com 2POSTRACK42 Manuel utilisateur

StarTech.com

StarTech.com ARMQUADSS Manuel utilisateur

StarTech.com

StarTech.com ADJ-TABLET-STAND-W Manuel utilisateur

StarTech.com

StarTech.com 42U Manuel utilisateur

StarTech.com

StarTech.com RK8OD Manuel utilisateur

StarTech.com

StarTech.com 4POSTRACK U Series Manuel utilisateur

StarTech.com

StarTech.com ARMBARTRIO2 Manuel utilisateur

StarTech.com

StarTech.com CMDUCT2U Manuel utilisateur

StarTech.com

StarTech.com ARMPIVSTND Manuel utilisateur

StarTech.com

StarTech.com MNRISERCLMP Guide de démarrage rapide

StarTech.com

StarTech.com WALLMOUNTH1 Manuel utilisateur

StarTech.com

StarTech.com ARMSLIM2USB3 Manuel utilisateur

StarTech.com

StarTech.com 2POSTRACK16 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur