StarTech.com ST1000SPEX Manuel utilisateur

PCI Express 10/100/1000

Mbps Gigabit Ethernet Card

ST1000SPEX

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-

sonable protection against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio com-

munications. However, there is no guarantee that interference will not occur in a particu-

lar installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.•

Increase the separation between the equipment and receiver.•

Connect the equipment into an outlet on a circuit different from that to which the receiver•

is connected.

Consult the dealer or an experienced radio/TV technician for help.•

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and

do not represent an endorsement of a product or service by StarTech.com, or an en-

dorsement of the product(s) to which this manual applies by the third-party company in

question. Regardless of any direct acknowledgement elsewhere in the body of this doc-

ument, StarTech.com hereby acknowledges that all trademarks, registered trademarks,

service marks, and other protected names and/or symbols contained in this manual and

related documents are the property of their respective holders.

Table of Contents

Introduction .................................................................... 1

Features ......................................................................................1

Package Contents .......................................................................1

Hardware Guide............................................................... 2

Speciﬁcations ..............................................................................4

Installation & Connection.............................................................4

Technical Support........................................................... 5

Warranty Information...................................................... 5

Installation

Package Contents

1 x Driver CD•

1 x Gigabit Ethernet Card•

1 x Low Proﬁle Bracket•

1 x Manual•

System Requirements

Windows® 2000/XP/Server 2003/Vista•

PCI Express-enabled system with an available PCI Express slot•

CAT5/CAT5E/CAT6 UTP/STP cable•

Hardware Installation

To connect the ST1000SPEX to the computer motherboard:

1. Shut down all power connected to the computer, as well as all

devices connected to the computer peripherally (i.e. Printers, Monitors,

Scanners etc.). As an added step to ensure safe installation, unplug

the power supply from the power outlet.

2. Remove the computer cover. For more detailed instruction on how to

perform this step, please refer to the documentation that was included

with your computer at the time of purchase.

3. Locate an empty PCI Express (x1) slot, removing the metal bracket

covering the corresponding port/socket located at the back of the com-

puter case. Please note: This card will function correctly in extended

PCIe slots (e.g. x4, x16) if available.

4. Position the card above the open PCI Express slot, ensuring that the

card is aligned with the entire slot. Insert the card ﬁrmly into the slot,

distributing force evenly across the length of the board. Once inserted,

secure the card into the adjoining socket (previously covered by metal

bracket), using the correct size screw (please consult documentation

that accompanied the purchase of your computer).

5. Replace the computer cover.

6. If unplugged, plug computer and all peripherals back in to power

source. Turn your computer on.

Driver Installation

Windows® 2000/XP/Server 2003

1. When the Found New Hardware Wizard window pops up, please

click the “Cancel” button to cancel the driver installation for the device

at this moment. The driver will be installed in the next step.

2. Please insert the included driver CD into your CD-ROM Drive.

3. From the Start Bar, click Run.

4. Type D:\PCIe\LAN\setup.exe, then click OK. (Change D:\ to match

your CD-ROM drive letter)

5. Follow the on-screen instructions to complete the installation.

6. Restart Windows to ﬁnalize the installation.

Windows® Vista

1. Please insert the included driver CD into your CD-ROM Drive.

2. From the Start Bar, click Run.

3. Type D:\PCIe\LAN\Vista\setup.exe, then click OK. (Change D:\ to

match your CD-ROM drive letter)

4. Follow the on-screen instructions to complete the installation.

5. Restart Windows to ﬁnalize the installation.

Veriying Driver Installation

Navigate to the Windows Control Panel and click on System Prop-

erties, then the “Device Manager” tab. You should see a “Realtek

RTL8168/8111 PCI-E Gigabit Ethernet NIC (Windows® 2000/XP/Serv-

er2003” or Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC

(NDIS 6.0) (Windows® Vista)” installed under “Network adapters” item.

Networking Settings

1. Click “Network Connection” in the Control Panel to set your network

settings.

2. Right-click the Local Area Connection used by the ST1000SPEX,

then select “Properties” from the pop-up menu.

3. Double-click the “Internet Protocol (TCP/IP)” item to change network

settings.

4. You can afﬁrm the network status by right-clicking the Local Area

Connection used by the ST1000SPEX, then selecting “Status” from the

pop-up menu.

How to Congure 10/100/1000Mbps Ethernet Structure

Connect to your 10/100/1000Mbps Ethernet connection over un-

shielded twisted pair (UTP) cable. The ST1000SPEX will automatically

operate on either speed without manual reconﬁguration.

Troubleshooting

The computer is not detecting the ST1000SPEX.

1. Make sure that the ST1000SPEX is correctly inserted into the PCI

Express slot; if not, turn off the computer and plug it again.

2. If the ST1000SPEX is plugged in correctly, see if the golden connec-

tors on the card are clean; if not, clean the connector surface.

3. If the ST1000SPEX is still not recognized, please change to another

PCI Express slot on your motherboard.

4. Please upgrade your motherboard BIOS to the latest version.

5. The card itself might be defective. You can try testing the

ST1000SPEX on another motherboard.

Computer failed to start after inserting Gigabit Ethernet PCI

Express Card.

Turn off the computer, remove the ST1000SPEX, and try to restart the

computer. If the computer starts successfully, it means that this card

has not been inserted into the PCI Express slot correctly. Please insert

the card ﬁrmly into the PCI Express slot or try another slot.

How to deal with an exclamation point icon on the Ethernet Host

controller.

1. Please shutdown your computer and move the card to another avail-

able slot, then re-install the ST1000SPEX drivers again.

2. This icon usually means that there is a resource conﬂict between

the ST1000SPEX and another card in your system. Please move the

card to another available slot and restart your computer. Windows will

then re-conﬁgure itself and re-assign resources. Check your device

manager again. If the exclamation point is still there, repeat the process

until it no longer appears.

The card is not operating at Gigabit Ethernet transfer speeds.

1. Please afﬁrm your Ethernet environment supports Gigabit structure.

2. Please use CAT6 UTP/STP cable.

Specications

Bus Type PCI Express

Full Duplex Support Ye s

LED Indicators 2 X 100 Link/Active LED (Green)

Gigabit Link/Active LED (Green)

Maximum Data Transfer Rate 2.5 Gbps

Number of Ports 1

Auto MDIX Ye s

Technical Support

StarTech.com’s lifetime technical support is an integral part of our com-

mit-ment to provide industry-leading solutions. If you ever need help

with your product, visit www.startech.com/support and access our com-

prehensive selection of online tools, documentation, and downloads.

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in

materials and workmanship for the periods noted, following the initial

date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The

warranty covers parts and labor costs only. StarTech.com does not war-

rant its products from defects or damages arising from misuse, abuse,

alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com

USA LLP (or their ofﬁcers, directors, employees or agents) for any dam-

ages (whether direct or indirect, special, punitive, incidental, consequen-

tial, or otherwise), loss of proﬁts, loss of business, or any pecuniary loss,

arising out of or related to the use of the product exceed the actual price

paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limita-

tions or exclusions contained in this statement may not apply to you.

StarTech.com has been making “hard-to-ﬁnd easy” since 1985,

providing high quality solutions to a diverse IT and A/V customer

base that spans many channels, including government, education

and industrial facilities to name just a few. We offer an unmatched

selection of computer parts, cables, A/V products, KVM and Serv-

er Management solutions, serving a worldwide market through our

locations in the United States, Canada, the United Kingdom and

Taiwan.

Visit www.startech.com today for complete information about all

our products and to access exclusive interactive tools such as the

Cable Finder, Parts Finder and the KVM Reference Guide.

Autres manuels pour ST1000SPEX

Table des matières

Autres manuels StarTech.com Carte PCI

StarTech.com

StarTech.com PEXUSB311AC2 Manuel utilisateur

StarTech.com

StarTech.com PCISATA2 Manuel utilisateur

StarTech.com

StarTech.com PEX4S952 Manuel utilisateur

StarTech.com

StarTech.com PCI1394_2 Manuel utilisateur

StarTech.com

StarTech.com PEXSATA22I Manuel du système

StarTech.com

StarTech.com PCIESATA2I Manuel utilisateur

StarTech.com

StarTech.com PR22GI-NETWORK-CARD Manuel utilisateur

StarTech.com

StarTech.com PEX1P Manuel utilisateur

StarTech.com

StarTech.com PEXUSB3S2 Manuel utilisateur

StarTech.com

StarTech.com PEXUSB311AC2 Manuel utilisateur

StarTech.com

StarTech.com 8STPEXUSB3S25 Manuel utilisateur

StarTech.com

StarTech.com PEX1S1PMINI Manuel utilisateur

StarTech.com

StarTech.com USB2HDCAPM Manuel utilisateur

StarTech.com

StarTech.com PCI8S950LP Manuel utilisateur

StarTech.com

StarTech.com PCI330USB2 Manuel utilisateur

StarTech.com

StarTech.com USB32HDCAPRO Manuel utilisateur

StarTech.com

StarTech.com PCI1PECPDV Manuel utilisateur

StarTech.com

StarTech.com PCI31PUSB Manuel utilisateur

StarTech.com

StarTech.com MPEX4S552 Manuel utilisateur

StarTech.com

StarTech.com ST1000BTPEX Manuel utilisateur

StarTech.com

StarTech.com PCI2S485LP Manuel utilisateur

StarTech.com

StarTech.com PCI1S550 Manuel utilisateur

StarTech.com

StarTech.com PEX1394B3LP Manuel utilisateur

StarTech.com

StarTech.com PCI1394_2 Manuel utilisateur

Manuels Carte PCI populaires d'autres marques

ERMA

ERMA SSI 1417 Manuel utilisateur

SIIG

SIIG CyberSerial Dual PCI Instructions de montage

Moxa Technologies

Moxa Technologies CP-102E Manuel utilisateur

I-Bus

I-Bus IBC2602 Manuel utilisateur

Exsys

Exsys EX-60102 Manuel utilisateur

Chelsio Communications

Chelsio Communications T5 Series Manuel utilisateur

Conrad Electronic

Conrad Electronic 97 46 71 Manuel utilisateur

Micro Innovations

Micro Innovations USB650A Manuel utilisateur

KTI Networks

KTI Networks KF-310 Manuel utilisateur

Asus

Asus SpaceLink WL230 Manuel utilisateur

SIIG

SIIG SC2475 Manuel utilisateur

TRENDnet

TRENDnet TEW-703PI Manuel utilisateur

Belkin

Belkin F5D7000F Manuel utilisateur

Pericom

Pericom PI7C7100 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3548 Manuel utilisateur

Digium

Digium TE200 Series Manuel utilisateur

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur

Western Digital

Western Digital FireWire PCI Adapter Manuel utilisateur