StarTech.com RKCONS1908K Manuel utilisateur

Manual Revision: 01/17/2019

User Manual

For the latest information and specications visit

www.startech.com/RKCONS1908K

8-Port VGA Rackmount LCD Console

| 19 in. | 1U

SKU#: RKCONS1908K

Actual product may vary from photos

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Compliance Statements

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any

interference, including interference that may cause undesired operation of the

device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables

aux appareils radio exempts de licence. L’exploitation est autorisée aux deux

conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil

doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Use of Trademarks, Registered Trademarks, and other

Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and

other protected names and/or symbols of third-party companies not related in

any way to StarTech.com. Where they occur these references are for illustrative

purposes only and do not represent an endorsement of a product or service

by StarTech.com, or an endorsement of the product(s) to which this manual

applies by the third-party company in question. Regardless of any direct

acknowledgement elsewhere in the body of this document, StarTech.com

hereby acknowledges that all trademarks, registered trademarks, service marks,

and other protected names and/or symbols contained in this manual and

related documents are the property of their respective holders.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Safety Statements

Safety Measures

• Wiring terminations should not be made with the product and/or electric

lines under power.

• Product installation and/or mounting should be completed by a certied

professional as per the local safety and building code guidelines.

• Cables (including power and charging cables) should be placed and routed

to avoid creating electric, tripping or safety hazards.

Mesures de sécurité

• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit

et/ou les câbles électriques sont sous tension.

• L’installation et/ou le montage du produit doit être réalisé par un

professionnel certié et dans le respect des normes locales et du code de

construction local.

• Les câbles (y compris les câbles d’alimentation et de chargement) doivent

être placés et acheminés de façon à éviter tout risque électrique, de chute ou

de sécurité

安全対策

• 電源が入っている状態の製品または電線の終端処理を行わないでくださ

い。

• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に

従い、有資格の専門業者が行うようにしてください。

• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し

を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう

にしてください。

Misure di sicurezza

• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le

linee elettriche sotto tensione.

• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un

tecnico professionale certicato che conosca le linee guida locali sulle norme

edilizie e sulla sicurezza.

• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati

e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o

pericoli per la sicurezza.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Säkerhetsåtgärder

• Montering av kabelavslutningar får inte göras när produkten och/eller

elledningarna är strömförda.

• Installation och/eller montering får endast göras av behöriga yrkespersoner

och enligt gällande lokala förordningar för säkerhet och byggnormer.

• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så

sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.

Warning Statements

• Make sure to assemble this product according to the instructions. Failure to

do so might result in personal injury or property damage.

• Never use this product if parts are missing or damaged.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Table of Contents

Compliance Statements........................................................................1

Safety Statements..................................................................................3

Warning Statements..............................................................................4

Product Diagram (RKCONS1908K) ......................................................8

Front............................................................................................................................................................... 8

Rear ................................................................................................................................................................ 9

Product Information..............................................................................10

Packaging Contents ................................................................................................................................. 10

Hardware Kit Contents ............................................................................................................................ 10

Requirements ............................................................................................................................................. 10

Installation ..............................................................................................11

Mounting the Rack Console Drawer .................................................................................................. 11

Grounding the LCD Console ................................................................................................................. 12

Connecting the LCD Console................................................................................................................ 12

Opening the LCD Console...................................................................................................................... 13

Closing the LCD Console ........................................................................................................................ 13

Panel Controls and On-Screen Display (OSD) Functions .................14

Console Panel Menu ................................................................................................................................ 14

OSD ..........................................................................................................15

Accessing the OSD.................................................................................................................................... 15

Operations/Menu Titles .......................................................................................................................... 15

Navigation ................................................................................................................................................... 16

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Administrator (ADM) Menu ..................................................................17

Accessing the Administrator Menu .................................................................................................... 17

Setting up a User Account..................................................................................................................... 18

Setting up User Access............................................................................................................................ 20

Turning On/O Broadcast (BRC) Mode ............................................................................................. 21

Scanning All Ports..................................................................................................................................... 22

Scanning All Ports That Are Powered On.......................................................................................... 23

Scanning All Quick View Ports.............................................................................................................. 24

Performing an Auto Scan....................................................................................................................... 24

Conguring the Port ID........................................................................................................................... 25

Setting a Default HotKey........................................................................................................................ 27

Setting Logout Time O ......................................................................................................................... 29

Resetting the Keyboard and Mouse................................................................................................... 30

Turning the Beeper On/O.................................................................................................................... 31

Turning the Mouse On/O .................................................................................................................... 32

Restoring Factory Settings..................................................................................................................... 33

Viewing Console Information............................................................................................................... 34

Editing Port Names................................................................................................................................... 35

Setting Quick View Ports ........................................................................................................................ 36

Logging Out of the OSD......................................................................................................................... 37

Hotkeys....................................................................................................37

LED Indicator ..........................................................................................38

Conguration..........................................................................................38

Testing the LCD Console......................................................................................................................... 38

Conguring Display Settings................................................................................................................ 39

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Specications..........................................................................................39

Important Considerations ....................................................................41

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Diagram (RKCONS1908K)

Front

1Mounting Bracket x 2 6Release Switch

2Current Port 7Display Menu Buttons

3Port Select Buttons/LEDs 8Keyboard LEDs

4Display 9Rails x 2

5Handle 10 Touch pad

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Rear

1Power Switch

2PS2 Mouse and Keyboard

Ports

3Daisy Chain Port

4Power Connection Port

5Ground Connection Screw

6USB Mouse and Keyboard

Ports

7Console Monitor Port

8Host Port x 8

123

4 5 678

Autres manuels pour RKCONS1908K

Table des matières

Autres manuels StarTech.com Tiroir LCD

StarTech.com

StarTech.com RKCONS1916K Manuel utilisateur

StarTech.com

StarTech.com RKCONS1916K Manuel utilisateur

StarTech.com

StarTech.com RACKCOND1701 Manuel utilisateur

StarTech.com

StarTech.com RKCONS1908K Manuel utilisateur

StarTech.com

StarTech.com RKCONS17HD Manuel utilisateur

StarTech.com

StarTech.com RKCONS1708K Manuel utilisateur

StarTech.com

StarTech.com 1UCABCONS Manuel utilisateur

StarTech.com

StarTech.com RKCOND17HD Series Manuel utilisateur

StarTech.com

StarTech.com RKCONS1501GB Manuel utilisateur

StarTech.com

StarTech.com CABCONS1716I Manuel utilisateur

StarTech.com

StarTech.com RKCONS1908K Manuel utilisateur

StarTech.com

StarTech.com NOTECONS02 Manuel utilisateur

StarTech.com

StarTech.com SCSIU3WDRWR Manuel utilisateur

StarTech.com

StarTech.com SV231USBLC Manuel utilisateur

StarTech.com

StarTech.com DRW150SAT Manuel

StarTech.com

StarTech.com RKCOND17HD Series Manuel utilisateur

StarTech.com

StarTech.com RKCONS1716K Manuel utilisateur

StarTech.com

StarTech.com 1U Manuel utilisateur

StarTech.com

StarTech.com RKCONS1901 Series Manuel utilisateur

StarTech.com

StarTech.com RKCONS1916K Manuel utilisateur

StarTech.com

StarTech.com RKCONS17HD Manuel utilisateur

StarTech.com

StarTech.com DuraView RACKCONS1501 Manuel utilisateur

StarTech.com

StarTech.com DuraView RACKCONS1708 Manuel utilisateur

StarTech.com

StarTech.com RACKCONS1716 Manuel utilisateur

Manuels Tiroir LCD populaires d'autres marques

Acnodes

Acnodes KD 8228 Manuel utilisateur

Ameriwood

Ameriwood 9524328PCOM Manuel utilisateur

Kesseböhmer

Kesseböhmer TANDEM solo Manuel utilisateur

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Manuel utilisateur

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Manuel utilisateur

NTI

NTI RACKMUX-V17-N Manuel utilisateur

Austin Hughes

Austin Hughes CyberView L120 Manuel utilisateur

Uplift Desk

Uplift Desk STR018 Manuel utilisateur

Acnodes

Acnodes KDC 81932 Manuel utilisateur

Acnodes

Acnodes RK1200T Manuel utilisateur

Mocka

Mocka Mischa Manuel utilisateur

GRASS

GRASS DWD XP Manuel utilisateur

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Manuel utilisateur

Fujitsu

Fujitsu RC25 Manuel utilisateur

Acnodes

Acnodes RK 1000B Manuel utilisateur

I-Tech

I-Tech RKP115 Manuel utilisateur

iTech Company

iTech Company AMil-1900-D12e-AC Manuel utilisateur