StarTech.com SECTBLTPOS Manuel utilisateur
Manual Revision: 12/04/2018
For the latest information, technical specications, and support for
this product, please visit www.startech.com/SECTBLTPOS.
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
SECTBLTPOS
Secure iPad Enclosure with Surface Mount
*actual product may vary from photos
Instruction manual
i
Table of Contents
Introduction............................................................................................1
Packaging contents.................................................................................................................................. 1
Product diagram ....................................................................................3
Front view .................................................................................................................................................... 3
Rear view...................................................................................................................................................... 3
Assemble the iPad enclosure ...............................................................4
Attach the pads to the plates................................................................................................................ 4
Insert an iPad.............................................................................................................................................. 7
Attach the iPad enclosure to a wall .................................................................................................... 8
Attach the iPad enclosure to a table or desk................................................................................... 9
Set up the iPad enclosure on a table or desk.................................................................................. 10
Attach the iPad enclosure to a universal VESA mount ................................................................ 11
Technical support...................................................................................12
Warranty information............................................................................12
Instruction manual
1
Introduction
The SECTBLTPOS provides a secure way to mount your iPad to a table, wall, or standard
VESA monitor mount. You can use the SECTBLTPOS to create a secure point-of-sale
system, an interactive marketing kiosk, or an educational display.
The SECTBLTPOS is designed to be used with the iPad, iPad 2, iPad (3rd generation), iPad
(4th generation), or the iPad Air.
Packaging contents
Mounting bracket
Qty: One
Front plate
Qty: One
Rear plate
Qty: One
Keys
Qty: Two
19x16x3 mm EVA pads
Qty: Four
12x100x15 mm EVA pads
Qty: Two
25x100x15 mm foam pads
Qty: Two
M4x8 mm hex screws
Qty: Four
2.5 mm Allen key
Qty: One
12 3
456
98
7
Instruction manual
2
45x15x2 mm EVA pads
Qty: Eight
12.7x2 mm rubber pads
Qty: Four
5x20 mm self-tapping screws
Qty: Three
15.4x5.0x2.0t at washers
Qty: Three
35x1.0t at washers
Qty: Two
Instruction manual
Qty: One
10 12
14
11
13 15
Instruction manual
3
Product diagram
Front view
Bracket
Front plate
Rear plate
Security lock
Rear view
Bracket
Rear plate
Front plate
Instruction manual
4
Assemble the iPad enclosure
Attach the pads to the plates
1. Use one of the security keys (4) to unlock the plates.
2. Remove the front plate (2) from the rear plate (3) (gure 1).
gure 1
2
3
Security lock
4
3. Turn over the front plate.
4. Remove the backing from four of the 45x15x2 mm EVA pads (10).
5. On the front plate, ax a pad in the center of each of the four sides of the
rectangular-shaped opening (gure 2).
gure 2
2
10
6. Remove the backing from the four 19x16x3 mm EVA pads (5).
7. On the rear plate, ax a pad on the inside of each of the tabs so that the pads are on
the side of the tabs closest to the center of the plate (gure 3).
Security lock
Instruction manual
5
3
7
8. Remove the backing from the two 25x100x15 mm foam pads (7).
9. On the rear plate, ax the pads in front of the tabs on the sides closest to the center
of the plate (gure 4).
gure 4
gure 3
3
5
10. Depending on the version of iPad that you’re using, do one of the following:
• If you’re using an iPad (1st generation), remove the backing from two of the
45x15x2 mm EVA pads (10). On the rear plate, ax a pad to each of the raised
edges on the long sides of the plate (gure 5).
• If you’re using an iPad 2, iPad (3rd generation), or iPad (4th generation), remove
the backing from four of the 45x15x2 mm EVA pads (10). On the rear plate,
ax a pad to each of the raised edges on the long sides of the plate. Ax a
second pad on top of each of the pads that you just attached, so that there are
two pads on each of the raised edges on the long sides of the plate (gure 6).
• If you’re using an iPad Air, remove the backing from the two 12x100x15 mm
EVA pads (6). Ax the pads on the rear plate, ush against the raised edges on
the long sides of the plate (gure 7).
Instruction manual
6
gure 7
3
6
gure 5
3
10
gure 6
3
10
Instruction manual
7
Insert an iPad
To prevent scratching, you should handle the iPad with care when you insert it into the
tablet holder.
Note: Make sure that all of the necessary cables are plugged into the iPad before you
insert it into the SECTBLTPOS.
1. Thread the iPad cables through the hole in the bottom of the rear plate (3).
2. Place the iPad in the rear plate so that it’s sitting on the two 25x100x15 mm foam
pads (7) (gure 8).
gure 8
3
iPad
3. Place the front plate (2) over the iPad (gure 9).
gure 9
2
4. To lock the front and rear plates together, press the button in the middle of the lock
on the side of the plate (gure 10).
gure 10
7
Instruction manual
8
Attach the iPad enclosure to a wall
1. Line up the holes on the mounting bracket with the four holes on the back of the
rear plate (3).
2. Use the four M4x8 mm hex screws (8) and the 2.5 mm Allen key (9) to attach the
mounting bracket to the rear plate.
3. Make three holes in the wall in the location where you want to attach the
SECTBLTPOS.
Tip! To make sure that the holes are in the right location and are spaced correctly,
hold the mounting bracket up to the wall and use a pencil to trace the holes in the
mounting bracket onto the wall.
4. Line up the holes in the bottom of the mounting bracket with the holes in the wall.
5. Insert the three 5x20 mm self-tapping screws (12) through the three 15.4x5.0x2.0t
at washers (13), the holes in the bottom of the mounting bracket, and into the
holes in the wall (gure 11).
6. Tighten as necessary.
gure 11
1
12 13
Table des matières
Autres manuels StarTech.com Accessoires informatiques
StarTech.com
StarTech.com MST30C2HHPD Manuel utilisateur
StarTech.com
StarTech.com ATX5250PRO Manuel
StarTech.com
StarTech.com DK30CH2DPPDU Manuel utilisateur
StarTech.com
StarTech.com S2510U33RUSM Manuel utilisateur
StarTech.com
StarTech.com MST30C2HDPPD Manuel utilisateur
StarTech.com
StarTech.com PCI220USB Manuel utilisateur
StarTech.com
StarTech.com TB3DOCK2DPPD Manuel utilisateur
StarTech.com
StarTech.com ST7300USB3B Manuel utilisateur
StarTech.com
StarTech.com EC400USB Manuel utilisateur
StarTech.com
StarTech.com S3510WMU33T Manuel du système
StarTech.com
StarTech.com MST30C2DPPD Manuel utilisateur
StarTech.com
StarTech.com CB1PECP Manuel utilisateur
StarTech.com
StarTech.com USB3VDOCK4DP Manuel utilisateur
StarTech.com
StarTech.com ECESAT32 Manuel utilisateur
StarTech.com
StarTech.com ATX8400PRO2B Manuel utilisateur
StarTech.com
StarTech.com MST30C2DPPD Manuel utilisateur
StarTech.com
StarTech.com SATERASER4 Manuel utilisateur
StarTech.com
StarTech.com CMPNL2U Series Manuel utilisateur
StarTech.com
StarTech.com ATXSILENT Manuel
StarTech.com
StarTech.com KEYBOARD-TRAY-CLAMP1 Manuel utilisateur
