Stack-On PFS-012-BG-E Manuel utilisateur
PAGE 1 of 28 40721-1703
OWNER'S MANUAL
®
PERSONAL FIREPROOF SAFES
ENGLISH
Record the serial number from the tag on the back of the safe or from the tag on inside of
the lock cover plate on the front of the safe.
Record your combinaon number.
Keep keys and combinaon in a secure place away from children.
WARNING: Keep your safe closed and locked at all mes when not in use.
DO NOT STORE THIS DOCUMENT, KEYS OR YOUR COMBINATION INSIDE THE SAFE.
Do not store electronic media, computer disks, audio-visual media or photographic negaves
in this safe. These materials will not survive the rated internal temperature of the safe.
They may be damaged or destroyed.
If you intend to store jewelery with moving parts, we recommend storage in an air ght
container prior to storing them in the safe.
Do not store pearls in this safe. The internal temperature of this safe is rated up to 350° F.
Pearls can be damaged at much lower temperatures.
Note: Stack-On Products Co. is not responsible for damage or loss of items placed in this safe
due to moisture.
IMPORTANT
®
PFS-012-BG-E
PERSONAL FIREPROOF SAFES WITH ELECTRONIC LOCK
PFS-016-BG-E PFS-019-BG-E
PAGE 2 of 28 40721-1703
OWNER'S MANUAL
®
PERSONAL FIREPROOF SAFES
SERIAL #:
PLACE SERIAL # HERE
Tools Needed, Hardware Included 2
Geng Started 3
Baery Installaon and Replacement 4
Entering Your Security Code 5-6
Locking the Safe 6
Selecng a Locaon and Securing the Safe 7-9
Shelf Placement and Turning the Sound ON / OFF 10
Frequently Asked Quesons 11-12
Key Replacement 13
Warranty 14
TABLE OF CONTENTS PAGE
YOUR ELECTRONIC COMBINATION #
COMBINATION HERE
NOTE: You can store your Key #, Serial # and Combinaon at – stackon.com under
Customer Service.
Storing your Key # or Combinaon will provide instant access to this important informaon should
you ever lose your keys or your combinaon. Only you will have access to this informaon.
( 4 ) M6 x 50 mm (2” long) Lag Screws
Flat Head
Screwdriver
10 mm Socket
Wrench
Drill
3/16" Drill Bit
3/8" Drill Bit
TOOLS NEEDED
( 4 ) Washers
( 4 ) Plasc Masonry Anchors
HARDWARE INCLUDED
PAGE 3 of 28 40721-1703
OWNER'S MANUAL
®
PERSONAL FIREPROOF SAFES
You will need to open the door with the key
in order to install the baeries. Baeries are
included and located inside the safe.
STEP 1
To open the door with the key, rst remove
the lock cover from the front of the faceplate
using a thin athead screwdriver.
STEP 2
Insert the key and turn counterclockwise.
STEP 3
Hold the key in the open posion and turn the
knob clockwise to open the door.
Locate the baeries inside the safe. Follow
steps on next page for baery installaon.
GETTING STARTED
NOTE: The key has been provided in case you lose or forget your security code or the baeries
run low. If you lose your key, you may purchase a replacement key by referencing the serial
number located under the removable lock cover. See secon at the end of this instrucon
regarding replacement keys.
PAGE 4 of 28 40721-1703
OWNER'S MANUAL
®
PERSONAL FIREPROOF SAFES
BATTERY
COVER
BATTERY
COVER
BATTERY
CARRIAGE
BATTERY
CARRIAGE
BATTERY INSTALLATION AND REPLACEMENT
STEP 1
To install or replace the baeries, open the baery
compartment on the back of the door by pushing the
baery cover plate in the direcon of the arrow and
install all new baeries as shown.
NOTE: Do not mix old and new baeries. Do not
mix alkaline, standard or rechargeable baeries.
STEP 2
Remove carriage
STEP 3
Make sure baery carriage is in the correct
orientaon as shown.
This safe uses 4 - AA baeries. Under normal use,
baeries will last about 1 year.
NOTE: If the baeries are low, the yellow light
will ash on the faceplate when you start to enter
your code.
STEP 4
Replace baery cover as shown.
Posion the baery cover in the middle of baery
opening.
Press down and back toward closed posion.
Make sure the cover is secured before closing safe.
PAGE 5 of 28 40721-1703
OWNER'S MANUAL
®
PERSONAL FIREPROOF SAFES
STEP 2
With the door open, enter your own personal
security code, which can be 3-8 digits long,
and conrm your new code by pressing the
green key on the electronic touch pad.
STEP 1
To enter your own security code you will need to follow the steps listed below:
Aer installing the baeries, locate the reset buon on the edge of the hinge side of the door.
Press the red reset buon and then release it, you will hear a beep.
DO NOT SHUT THE DOOR UNTIL YOU HAVE CONFIRMED YOUR NEW SECURITY CODE HAS BEEN
ENTERED CORRECTLY.
the safe.
You will have 3 seconds to press the green
key otherwise you will have to start over from
step one. There will be 2 beeps (if the sound is
turned on) and the green light will ash twice if
your code has been entered successfully.
Before you close the door, enter your new
security code and press the green key to
make sure the lock releases the knob so you can
turn it and retract the live acon locking bolts.
ENTERING YOUR SECURITY CODE
STEP 2 CONTINUE TO PAGE 6
PAGE 6 of 28 40721-1703
OWNER'S MANUAL
®
PERSONAL FIREPROOF SAFES
If the code fails, go to Step 1 and start again. If the code works successfully, then you
should lock the safe.
When you open the safe in the future, enter the security code you have set followed by the
green key and turn the knob.
If an incorrect security code is entered 3 mes the safe will beep 5 mes (if the sound is turned
on) and the
seconds before you can try your code again. The safe will beep one me (if the sound is turned
on) and the green light will ash once when the lockout period is over.
If an incorrect security code is entered 1 addional me the safe will beep 5 mes (if the sound
is turned on) and the
before the code can be tried again. The safe will beep one me (if the sound is
turned on) and the green light will ash once when the lockout period is over.
LOCKING THE SAFE
To lock the safe, close the door and turn the knob
counterclockwise to the 12:00 posion.
12:00 POSITION
NOTE ON LOCKING THE SAFE:
PAGE 7 of 28 40721-1703
OWNER'S MANUAL
®
PERSONAL FIREPROOF SAFES
STEP 1
Slowly drill out all mounng holes located on the back and boom of safe as shown below.
DO NOT DRILL FROM A RANDOM LOCATION FROM INSIDE THE SAFE.
SELECTING A LOCATION AND SECURING THE SAFE
BACK
BOTTOM
THE SAFE SHOULD ALWAYS BE KEPT
OUT OF THE REACH OF CHILDREN
PAGE 8 of 28 40721-1703
OWNER'S MANUAL
®
PERSONAL FIREPROOF SAFES
STEP 2
Posion the safe in
desired locaon.
Use a screw or pencil to mark the
4 mounng locaons on the
oor and wall.
NOTE: Make sure to mark
and secure to one wall stud
as shown.
Remove safe from marked locaon.
STEP 3
SECURING TO WOOD:
Using a 3/16" drill bit, drill a 2.5"
hole in marked locaon.
SECURING TO MASONRY:
Using a 3/8" drill bit, drill a 2.5" hole
in marked locaon.
WALL STUD
WALL STUD
PAGE 9 of 28 40721-1703
OWNER'S MANUAL
®
PERSONAL FIREPROOF SAFES
STEP 4
SECURING TO WALL AND WOOD
FLOOR OR PERMANENT SHELF:
NOTE: Posion plasc wall anchor
in wall before placing safe in
mounng locaon.
Use plasc wall anchor to secure the
other back hole that is not centered
on a wall stud.
Posion safe in mounng locaon.
Posion lag screws through washers
and safe as shown in FIGURE 1.
Tighten screws using a socket wrench.
SECURING TO MASONRY FLOOR:
Insert plasc wall anchors into
pre-drilled holes in masonry as
shown in FIGURE 2.
Use a plasc wall anchor to secure the
other back hole that is not centered
on a wall stud.
Posion safe in mounng locaon.
Posion lag screws through washers
and safe as shown in FIGURE 1.
Tighten lag screws into masonry
anchors using a socket wrench.
FIGURE 2
FIGURE 1
ANCHORS
LAG SCREWS
WASHERS
WALL STUD
WALL STUD
WALL ANCHOR
WALL ANCHOR
PAGE 10 of 28 40721-1703
OWNER'S MANUAL
®
PERSONAL FIREPROOF SAFES
PFS-016-BG-E, PFS-019-BG-E SHELF PLACEMENT
STEP 2
STEP 1
SHELF
CLIP
VERTICAL ADJUSTMENT
Determine the shelf locaon, and place 4 Shelf
Clips as shown.
Push top of Shelf Clip into Shelf Rail on inside
of safe. Rotate clip boom tab and push into
next hole in shelf rail.
To adjust shelf height, remove and reposion
shelf clips vercally on shelf rail.
SHELF
RAIL
TURNING THE KEYPAD SOUND OFF/ON
You can turn o the “Beep” sound of the
keypad by pressing the red key.
To turn the “Beep” sound on, press the
red key again.
SHELF
RAIL
NOTE: PFS-012-BG-E does not have an adjustable shelf, the shelf is removable to meet your storage needs.
Ce manuel convient aux modèles suivants
2
Table des matières
Langues :
Autres manuels Stack-On Sûr
Stack-On
Stack-On QAS-1512 Manuel utilisateur
Stack-On
Stack-On Security Plus QAS-710 Manuel utilisateur
Stack-On
Stack-On PS-5-B-12 Manuel utilisateur
Stack-On
Stack-On W-22-BH-E-S Manuel utilisateur
Stack-On
Stack-On E-69-MB-B-S Manuel utilisateur
Stack-On
Stack-On QAS-1000 Manuel utilisateur
Stack-On
Stack-On Sentinel GCWB-18 Manuel utilisateur
Stack-On
Stack-On QPS-2012-E Manuel utilisateur
Stack-On
Stack-On QAS-1510 Manuel utilisateur
Stack-On
Stack-On E-48-MG-C-S Manuel utilisateur
Stack-On
Stack-On TD5518-24-GP-E-S Manuel utilisateur
Stack-On
Stack-On Security Plus QAS-1310 Manuel utilisateur
Stack-On
Stack-On ASC-1416 Manuel utilisateur
Stack-On
Stack-On TD-24-GP-C-S Manuel utilisateur
Stack-On
Stack-On SS-22-MG-C Manuel utilisateur
Stack-On
Stack-On SHD-AOTT-BG-E Manuel utilisateur
Stack-On
Stack-On QAS-1845-B Manuel utilisateur
Stack-On
Stack-On SHD-AOTT-BG-B Manuel utilisateur
Stack-On
Stack-On PDS-1800-B Manuel utilisateur
Stack-On
Stack-On PDS-1500-B Manuel utilisateur
Manuels Sûr populaires d'autres marques
Honeywell
Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuel utilisateur
Hornady
Hornady SnapSafe Trunk Safe II Manuel utilisateur
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO Manuel utilisateur
Honeywell
Honeywell 5912 Manuel utilisateur
Phoenix
Phoenix FS1280F Manuel utilisateur
Phoenix
Phoenix SS0992K Fiche d'information produit
