Stac PCM-250 Manuel utilisateur
Power Over CameraLink SELECTOR / DISTRIBUTOR / REPEATER
This unit works as a digital signal selector, a distributor and a repeater which is
compliant with PoCL(Power over CameraLink) standard. Input terminal is SDR
and output terminal is MDR. Signal from PoCL compatible camera can connect to
standard CameraLink device without conversion cable. When using as a selector,
by switching input of 2 device, image processing board can be reduced by half .
When using as a distributor, distributed and parallel processing available with 2
distribute output and building image processing system.
Control signal(CC1-CC4) and transfer line(SerTFG,SerTC) specified with
CameraLink Base Configuration can select input/output from switch of front panel
or external signal,
Overview
Features
SELECT and
PoCL MODE
(Input Penel)
- Compliant with CameraLink Base configuration (Standard specification of FA digital
camera).
- The unit works as a selector and a distributor, easily switch depend on the system.
- Input/Output system of control signal(CC1- CC4), communication
line(SerTFG,SerTC) is selectable.
- Remarkable compact body that can be placed anywhere.
Input signal
Output signal
External remote
CLK frequency
Power supply/ consumption
Temperature/Humidity
Size
Weight
Accessories
株式会社 スタック
〒350-1306 埼玉県狭山市富士見1-22-3
TEL: 04-2959-7585 FAX: 04-2957-3347
URL: http://www.stac.co.jp/
PoCL 2 input connecter SDR
CameraLink Base Configuration 2 output connecter MDR
0-5V TTL
20MHz-85MHz(MAX)
DC 12V/ 9W(with attached AC adapter)
0°C-40°C、0%-80% (no condensation)
150(W)×36(H)×80(D)mm
0.5 kg
AC adapter x 1, Instruction manual x 1
Specifications
Output panel
STAC Corporation
1-22-3, Fujimi, Sayama-shi, Saitama, 350-1306 JAPAN
TEL: 81-4-2959-7585 FAX: 81-4-2957-3347
URL: http://www.stac.co.jp/
Switch MODE to use as a distributor, repeater or selector.
Distributor mode
Distributor
Selector
Selector mode
* Product appearance and specifications are subject to change without notice.
PCM-250
Image processing
board
System connection example
Repeater
Repeater mode
Image processing
board
Image processing
board
Image processing
board
CameraLink
compatible cable
PoCL cable
PoCL
compatible camera
CameraLink
compatible cable
CameraLink
compatible cable
DC 12V IN
Switch functions by SELECT of front panel and MODE.
PoCL cable
PoCL
compatible camera
PoCL cable
PoCL
compatible camera
PCM-250
PCM-250
D Select CC1-4,SerTC,Ser TFG of OUTPUT A
D Select CC1-4,SerTC,Ser TFG of OUTPUT B
S,D Select A,B from REMOTE terminal
SELECT MODE functions
S Select image signal of INPUT A
S Select image signal of INPUT B
Ａ
Ｂ
Ｒ
MODE
D=Distributor
R=Repeater
S=Selector
Table des matières
Autres manuels Stac Matériel informatique
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
