Stac Zero Halcyon Manuel utilisateur

Version 3.0

STAC Zero Halcyon

User Manual

Welcome!

Congratulations on purchasing

your STAC Zero Halcyon Smart

Trainer! Please take the time to

read through and understand

the recommended set-up,

operation and safety best

practices to make sure you get

the most out of your Halcyon.

Happy riding,

-The STAC Performance team

Support Videos: Support videos, along with many helpful support

articles and a full color copy of the manual are available through our

website support portal at https://www.staczero.com/support

___________________________________________________________

Table of contents

OVERVIEW.......................................................................................................4

TRAINER SAFETY..............................................................................................5

TRAINER COMPONENT DIAGRAM ...................................................................6

MOTOR ASSEMBLY STEPS................................................................................7

FIRST TIME SET-UP & CALIBRATION.................................................................8

PRIOR TO SET-UP .....................................................................................8

A. INSTALL BIKE ON TRAINER ...................................................................8

B. INSTALL A SPOKE MAGNET.................................................................10

C. ACTIVATE AND CALIBRATE TRAINER ..................................................11

 
3 
WHEEL WEIGHTS ...........................................................................................12 
WHEEL WEIGHT INSTALLATION..............................................................12 
OPTIONAL WHEEL WEIGHT ADDITION INSTALLATION.............................17 
USING TRAINING APPS ..................................................................................20 
COMPATIBLE APPS.................................................................................20 
SIMULATION MODE...............................................................................20 
ERG MODE ............................................................................................20 
CONNECT VIA BLUETOOTH SMART (BLE) ................................................20 
CONNECT VIA ANT+ FE-C........................................................................20 
STAC CONTROL PANEL APP OVERVIEW .........................................................21 
WHERE TO DOWNLOAD.........................................................................21 
GETTING STARTED .................................................................................21 
MENU OPTIONS.....................................................................................23 
HALCYON TRAINING MODES .........................................................................25 
I. SIMULATION MODE...........................................................................25 
USE STAC CONTROL PANEL WITH STRAVA..............................................25 
USE STAC CONTROL PANEL WITHOUT STRAVA .......................................26 
ADJUST INERTIA/ ROAD FEEL .................................................................26 
II. ERG MODE ........................................................................................27 
USE STAC CONTROL PANELS’ ERG MODE................................................27 
ADJUST ERG MODE TRANSITION SPEED..................................................28 
UPLOADING WORKOUTS........................................................................28 
III. RESISTANCE MODE............................................................................29 
CADENCE DETECTION ....................................................................................30 
STORING AND CHARGING YOUR TRAINER.....................................................31 
UNDERSTANDING THE LIGHTS.......................................................................32 
TROUBLESHOOTING ......................................................................................33 
Table of Contents...................................................................................33 
APPENDIX A: WHEEL MAGNET ALIGNMENT ...........................................41 
APPENDIX B: MANUAL POSITIONING......................................................46 
 
 

Overview

You will need:

1. Your bike, mounted on your STAC Zero Halcyon Smart Trainer.

(See First Time Set-up and Calibration, pages 8-10).

2. A training app, which tells your trainer how much resistance to

create, running on a device such as a smart phone, tablet,

laptop or personal computer.

In order to control the Halcyon, you’ll download your preferred training

app to your device, start up the app and the trainer, and then connect

to the trainer in the app via one of two wireless protocols: Bluetooth

Smart [BLE] or ANT+.

(See Page 20 for a list of training apps and connection instructions, and

page 21 to download STAC’s free app, STAC Control Panel).

Types of Smart workouts:

There are two main types of Smart workouts.

ERG MODE

Erg mode keeps you accountable; making sure you hit every power target

in your workout by increasing resistance if you slow down too soon, or

easing up if you pedal faster. Erg mode apps often come with pre-planned

interval workouts, and show your training data onscreen.

SIM MODE

Simulation Mode simulates an outdoor ride, tougher on the climbs than the

downhills. Sim mode apps often come with fun graphics and allow you to

race with other app users.

New to Smart Trainers? Start here!

The Halcyon Smart Trainer can add fun, variety, challenge and

accountability to your workouts. Here’s a summary of everything

you need to know to get started Smart Training.

The Halcyon also has a non-smart mode, Resistance Mode, where you use

your bike’s gears to adjust resistance. Set the magnet distance in STAC

Control Panel to use Resistance mode [page 29].

Uploaded workouts: Sometimes you just want to get on and ride. See page

28 to learn how to upload a favorite Erg workout to your trainer so it starts

automatically.

TRAINER SAFETY

oBefore using your STAC Zero Halcyon consult a doctor if you or any

member of your household have a medical device that can be

affected by strong magnetic fields, such as pacemakers or ICD’s.

oStore the trainer out of reach of children and pets.

oWhen moving the trainer, carry it by the Threaded Rods or the Knobs

to avoid closing your hands between the Legs and the Frame.

oDo not put fingers or other appendages between the Magnet Arrays.

oBe very careful when using metal tools near the Magnets.

oNever place a computer or other sensitive electronics near the

Magnets.

oBefore each use, inspect the face of the Magnet Array for any metal

debris. Wipe any debris off with a rag.

oAvoid adjusting the Calipers by hand, as this contributes to wear and

tear on the motors. To manually position the Calipers, use the STAC

Control Panel App [see page 46].

oAlways retract the Spring Pin completely before rotating the Magnet

Arrays. Never use force on the Magnet Arrays or Spring Pins.

Rotating the Magnet Arrays forcefully will damage the Spring Pins.

oBe careful not damage or pull out ribbon cables and wires.

TRAINER COMPONENT DIAGRAM

Frame:

1. U-Frame

2. Body Feet

3. Legs

4. Knobs

5. Threaded Rods

6. Wing Nuts

7. Skewer Cups

Resistance Unit:

8. Strain Gauge

9. Calipers

10. Spring Pins

11. Magnet Array

12. Anti-wear Stickers

13. Speed Sensor

14. Electronics Housing

15. Actuator

Accessories:

16. Wheel Weight

17. Wheel Weight Addition

(optional accessory)

18. Spoke Magnet

Not pictured above:

19. Quick Release Skewer

20. Micro USB cable

21. 4mm and 3mm Allen

Keys

MOTOR ASSEMBLY STEPS

1. Gently move

motor post to

align with hole on

the caliper arm.

2. Using the

supplied 8mm

wrench, begin

screwing

motor post

into caliper

arm.

3. Tighten the

motor post

until the hex

section is right

against the

body of the

caliper.

Repeat with

2nd motor.

FIRST TIME SET-UP & CALIBRATION

Support Video: “Installing your bike on the STAC Zero Halcyon Smart

Trainer”

PRIOR TO SET-UP

1. Complete the final assembly step before beginning the first time set

up. Motors arrive detached to prevent damage to them during shipping.

2. The STAC Zero Halcyon’s battery may be low when it arrives. Charge

your trainer for 30 minutes using the included micro-USB cable to get

started. See page 28 for full charging instructions.

A. INSTALL BIKE ON TRAINER

1. Open the Legs to full extension and place the trainer flat on the

floor.

2. Pull back the Spring Pin and rotate the Magnet Arrays from

vertical to horizontal one at a time. The Spring Pin will seat itself

once the Magnet Array is in place.

3. Move the Speed Sensor to the side and out of the way.

!ALWAYS RETRACT THE SPRING PINS COMPLETELY BEFORE

ROTATING THE MAGNET ARRAYS. NEVER USE FORCE ON THE

MAGNET ARRAYS OR SPRING PINS.

4. Unscrew the Knobs, opening them all the way.

Tip: Moving the Calipers by hand contributes to wear and tear on the

motors.If your wheel will not easily fit between the Magnet Arrays

refer to Troubleshooting [page 34].

!ALWAYS ROTATE THE MAGNET ARRAY HORIZONTALLY AND PULL

THE SPEED SENSOR TO THE SIDE BEFORE MOUNTING THE BIKE ON

THE TRAINER TO AVOID DAMAGE TO THE TRAINER.

5. Install your bike on the trainer, with the Frame behind the bike,

and the Legs extended towards the front.

a. Back the bike into the trainer, aiming to keep the tire

centered over the central bolt.

b. Insert one end of the Skewer in a Skewer Cup and

tighten the Knob until the tire is centered. Repeat on

the other side.

c. Tighten both Knobs.

d. Tighten the Wing Nuts against the Frame, locking the

bike in place.

B. INSTALL A SPOKE MAGNET

1. Install the included Spoke Magnet on a spoke.

2. Align the Spoke Magnet with the tip of the Speed Sensor.

3. Adjust the Speed Sensor within 5mm-10mm (¼”-½”) of the Spoke

Magnet.

4. Turn the wheel a couple of revolutions slowly by hand. Check that

a. The Spoke Magnet will not hit your bike or the Speed Sensor.

b. The red light on the Electronics Housing flashes when the

Spoke Magnet passes the Speed Sensor.

Tip: If your wheel is not quite centered on your first try, tighten one

knob while loosening the other to shift the bike over.

Autres manuels pour Halcyon

Table des matières

Autres manuels Stac Zero Équipement de fitness

Stac Zero

Stac Zero Rigado BMD-300 Manuel utilisateur

Manuels Équipement de fitness populaires d'autres marques

NSD

NSD PB-188P Manuel utilisateur

Performance

Performance HyperVibe Manuel utilisateur

Scalamobil

Scalamobil S27 Manuel utilisateur

Precor

Precor Experience Series Manuel utilisateur

FYTTER

FYTTER RedMIUM BENCH BE-T6R Manuel utilisateur

Taurus

Taurus TF-RK1312 Manuel utilisateur

Nustep

Nustep T5 Manuel utilisateur

Precor

Precor CW-507 Manuel utilisateur

Movement

Movement BICEPS Idea Manuel utilisateur

Kegel8

Kegel8 V For Men Manuel utilisateur

Skandika

Skandika Styrke II Manuel utilisateur

BLK BOX

BLK BOX 21-0122-0B Manuel utilisateur

Stamina

Stamina aeropilates premier 299 Manuel utilisateur

SPORTSTECH

SPORTSTECH PBX300 Manuel utilisateur

ParaBody

ParaBody Serious Steel 877102 Manuel utilisateur

Weslo

Weslo Gym 650 Manuel utilisateur

Rebel

Rebel ACTIVE RBA-1011 Manuel utilisateur

4iiii

4iiii FLiiiight Manuel utilisateur