SPX FLOW APV DELTA DA3+ Manuel utilisateur

APV DELTA DA3+ DN40-100, 1.5”-4”

DOUBLE SEAT VALVE

SAFETY AGAINST EXPLOSION - FOR SPECIFIC ATEX-APPLICATIONS

FORM NO.: H331524 REVISION: UK-0-ATEX READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT.

INSTRUCTION MANUAL

Scan for DA3+ Valve

Maintenance Video

EU Declaration of Conformity

for Valves and Valve Manifolds

SPX Flow Technology Germany GmbH

Gottlieb-Daimler-Str. 13, D-59439 Holzwickede

herewith declares that the

APV double seat valves of the series DA3+ ATEX design

in the nominal diameters DN 40 – 100, 1,5“ – 4“

meet the requirements of:

Machinery Directive 2006/42/EC

(superseding 89/392/EEC and 98/37/EC)

Equipment and Product Safety Act GPSG - 9.GPSGV

and

Directive on the Protection against Explosion 2014/34/EU ATEX (superseding 94/9/EC)

for Equipment Category -/2G IIB TX

For official inspections, SPX FLOW presents

a technical documentation according to Appendix VII of the Machinery Directive,

this documentation consisting of documents of the development and construction,

description of measures taken to meet the conformity and to correspond with

the basic requirements on safety and health, incl. an analysis of the risks,

an analysis of ignition hazards as well as an instruction manual manual with safety instructions.

The conformity of the valves is guaranteed.

An ATEX documentation is lodged at the notified body DEKRA EXAM GmbH

in Bochum, Germany (No. 0158).

Authorised person for the documentation:

Frank Baumbach

SPX Flow Technology Germany GmbH

Gottlieb-Daimler-Str. 13, D-59439 Holzwickede, Germany

November 2017

Frank Baumbach

Regional Engineering Manager, F&B Components

APV_DA3+_ATEX_UK-0_022018.indd

Double seat valve

DELTA DA3+ - ATEX

Instruction manual: UK - rev. 0

APV

Content Page

1 General Terms 2

1.1. Symbols

1.2. ResponsibilityforATEXcertication-Scopeofsupply

2. Safety Instructions 3 - 4

3. Identicationofvalves,Temperatureclasses,Responsibilites  5-6

3.1. IdenticationofvalvesforapplicationinATEXenvironment

3.2. Temperature classes and permissible temperatures

3.3. Responsibilities

4. IntendedUse  6

5. ModeofOperation  7-8

5.1. General terms

5.2. Valve in “closed” position

5.3. Valve in "open" position

6. AuxiliaryEquipment       9

6.1. Valve position indication (proximity switches)

7. Cleaning        10-11

7.1. Flow areas

7.2. Seal surfaces

7.3. Leakage chamber

7.4. Cleaning recommendation

7.5. Flushing quantity

7.6. Cleaning of upper area

7.7. Cleaning of lower area

8. Installation  12

8.1. General terms

8.2. Welding instructions

9. Dimensions/Weights  13

10. TechnicalData  14-17

10.1. General data

10.2. Compressed air quality

10.3. Kvs values in m³/h

10.4. Valve stroke open/closed

10.5. Air consumption / Closing times

11. Materials        17

12. Maintenance        18-19

13. ServiceInstructions  20-24

13.1. Dismantling from piping system

13.2. Disassembly of product-wetted seals

13.3. Maitenance of seat lift actuator / main cylinder

13.3.1. Dismantling of seals and disassembly of seat lift actuator and main cylinder

13.3.2. Installation of seals and assembly of seat lift actuator and main cylinder

13.4. Installation of seals and assembly of valve

13.5. Installation of valve insert

14. DisassemblyandAssemblyTool 25

(lower shaft seal)

15. AssemblyToolforMiddleSeal 26

16. DetectionofSealDamage 28

17. SparePartsListsandLubricationChart 29

DA3+-DN40-100;1,5“-4”-ExII-/2GIIBTX  RNATEX053.73

APV_DA3+_ATEX_UK-0_022018.indd

Double seat valve

DELTA DA3+ - ATEX

Instruction manual: UK - rev. 0

APV

1. General Terms

This instruction manual applies for DELTA DA3 plus double seat

valves in the nominal dimensions DN 40-100, 1,5"-4" for use in

specific ATEX applications (according to Directive 2014/34/EU).

The valve must only be assembbled, disassembled and

reassembled by persons who have been trained in APV valves or by

SPX FLOW service team members. If necessary, contact

your local SPX FLOW representative.

This instruction manual must be read and observed by the

responsible operating and maintenance personnel.

We point out that we will not accept any liability for damage or

malfunctions resulting from the non-compliance with this instruction

manual.

Descriptions and data given herein are subject to technical changes.

1.1.Symbols

This symbol draws your attention to important directions which have

to be observed with regard to the operation in explosive areas.

This technical safety symbol draws your attention to important

directions for operating safety. You will find it wherever the activities

described are bearing health hazards or risks for persons or

material assets.

1.2.ResponsibilityforATEXcertification-scopeofsupply

SPX FLOW will be held responsible only for the valves supplied and

selected according to the operating conditions indicated by the

customer or end user and as stated in the order confirmation. If in

doubt, contact your local supplier.

All other assembled equipment and devices must have a separate

certification of at least the same or higher grade of protection

as the valve, provided by the supplier(s) of that equipment and

devices. The complete unit must be certified separately by the final

assembling manufacturer and must have a separate name plate

supplied by the unit manufacturer.

APV_DA3+_ATEX_UK-0_022018.indd

Double seat valve

DELTA DA3+ - ATEX

Instruction manual: UK - rev. 0

APV

2. Safety Instructions

Danger!

Ifthevalveisusedforammableliquids,itmustbeobserved

that every operation of the valve is combined with an operating

leakage of about 4.0 ml.

The operator shall consider these conditions in his considerations

andclassicationsofexplosiveenvironments.

- Regular maintenance including the replacement of all seals and

bearing bushes must be scheduled in order to prevent leakages and

discharge of liquids.

- Connections which are not used must be sealed by a plug.

- Safe discharge of the cleaning liquids must be ensured!

- Before any maintenance work the line system must be

depressurized and drained if possible.

- Separate all electric and pneumatic connections.

- Observe the following Service Instructions to ensure safe

maintenance of the valve.

Danger!

Welded actuators are preloaded by spring force.

Openingoftheactuatorsisstrictlyforbidden.

Dangertolife!

Actuators which are no longer used or defective must be diposed in

professional manner.

Defective actuators must be returned to your SPX FLOW

representative for their professional disposal and free of charge for

you.

Please address to your local SPX FLOW representative.

APV_DA3+_ATEX_UK-0_022018.indd

Double seat valve

DELTA DA3+ - ATEX

Instruction manual: UK - rev. 0

APV

2. Safety Instructions

Installation, connection, start-up, maintenance and repair work must

onlybecarriedoutbyqualiedpersonnel.

The following aspects must be observed:

- The instructions of this manual together with all relevant instructions

for the components, equipment and installations installed.

- Warningsandinstallationsxedtothecomponents.

- Thespecicregulationsforandrequirementstothesysteminwhich

the valve is installed.

- The currently valid regional, national and international regulations.

- Any special requirement and national legislation relative to the use

ofammableliquidsortools,e.g.theriskofignitionincaseofspark

formation, must be observed.

It must be ensured that the group, the category and the temperature

class of the valve complies with the minimum requirements of the

operating environment!

Inammablegasmixturesordustconcentrationsinconnectionwith

hot, operational and movable parts of the valve can lead to serious

or fatal injury!

Before start of assembly the operator must make sure that an

explosive atmosphere does not exist (detection/measurement of

potential concentration of hazardous substances).

Conductive connection to the pipeline must be provided.

The integration into the internal potential equalisation must be

guaranteed!

The APV CU2, CU3 and CU4 Control Units are not suited for use

in ATEX environments!

APV_DA3+_ATEX_UK-0_022018.indd

Double seat valve

DELTA DA3+ - ATEX

Instruction manual: UK - rev. 0

APV

3. Identicationofvalves, 

Temperatureclasses,Responsibilities

3.1. IdenticationofvalvesforuseinATEXenvironment

 ATEX-identication:

- Equipment group II

- Equipment category outside 2G

inside no equipment

- Explosion subcategroy IIB

Ambient temperature for the operation

0 °C < Tamb < 40 °C

- Temperature classes TX (according to table 3.2)

3.2. Temperatureclassesandpermissibletemperatures

Media temperature ≤75°C ≤95°C ≤130°C

up to

140 °C

= Tmax.

Safety addition + 5 °C + 5 °C + 5 °C + 5 °C

Temperature class T6 T5 T4 T3

Under standard operating conditions the highest surface

temperature will be comparably as high as the temperature of the

medium plus a safety addition for local temperature increases. The

valve must be completely free to the environment in order to provide

 forsufcientheatrelease.

All data (temperature classes) refer to an ambient temperature

of 0°C and 40°C. If the ambient temperature is above 40°C, the

temperature difference must be adjusted. In all cases, contact your

responsible SPX FLOW representative!

Table des matières

Autres manuels SPX FLOW Unité de contrôle

SPX FLOW

SPX FLOW Waukesha Cherry-Burrell DA4 Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA RGMS4 Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA RG4 Manuel utilisateur

SPX FLOW

SPX FLOW APV CU4 Series Manuel utilisateur

SPX FLOW

SPX FLOW W70 Series Manuel utilisateur

SPX FLOW

SPX FLOW Waukesha Cherry-Burrell D4 Series Manuel utilisateur

SPX FLOW

SPX FLOW APV CU41-S Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA RGMS4 Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA DE3 Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA MS4 Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA SI2 Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA UF3 Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA PR2 Manuel utilisateur

SPX FLOW

SPX FLOW Waukesha Cherry-Burrell D4 Series Manuel utilisateur

SPX FLOW

SPX FLOW W61 Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA UF3(A) Manuel utilisateur

SPX FLOW

SPX FLOW WR60 Series Manuel utilisateur

SPX FLOW

SPX FLOW APV CU4plus AS-i Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA CPV Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA SVS1F DN25-100 Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA RG4 Manuel utilisateur

SPX FLOW

SPX FLOW W71 Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA DKR2 Manuel utilisateur

SPX FLOW

SPX FLOW APV DELTA SV1 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur