SPRT SP-Y32 Manuel utilisateur
SPRT®
Android POS Terminal
User’s Manual
（SP-Y32）
（Ver 1.02）
Beijing Spirit Technology Development Co.,Ltd
Content
Brief introduction............................................................................................................................................1
Chapter 1 Features and performance.....................................................................................................1
1.1 Printing Performance............................................................................................................................. 1
1.2 Paper Roll................................................................................................................................................ 1
1.3 Print characters.......................................................................................................................................2
1.4 Interface Mode........................................................................................................................................ 2
1.5 Print Control Commands.......................................................................................................................3
1.6 Power Requirements............................................................................................................................. 3
1.7 Working Environment.............................................................................................................................3
1.8 Dimensions.............................................................................................................................................. 3
1.9 Model Name............................................................................................................................................ 4
Chapter 2 Operating Instructions.............................................................................................................4
2.1 Printer appearance.................................................................................................................................4
2.2 Install the paper roll................................................................................................................................5
2.2.1 Install paper roll........................................................................................................................... 5
2.2.2 Cutter jamming............................................................................................................................ 6
2.3 Interface connection...............................................................................................................................6
2.3.1 USB-TypeA.................................................................................................................................. 6
2.3.2 Ethernet Interface........................................................................................................................6
2.3.3 USB Interface...............................................................................................................................6
2.3.4 Bluetooth.......................................................................................................................................7
2.3.5 WIFI............................................................................................................................................... 7
2.3.6 4G USB DONGLE.......................................................................................................................7
2.3.7 Cash Drawer Port........................................................................................................................8
2.3.8 Power connection........................................................................................................................8
2.4 Indicators, Buzzers, and Key Operation.............................................................................................9
2.5 Normally powered on...........................................................................................................................10
2.6 Self-testing.............................................................................................................................................10
2.7 Hexadecimal printing........................................................................................................................... 11
2.8 Printer Parameter Settings................................................................................................................. 12
2.9 Entering Program Upgrade Mode..................................................................................................... 12
Appendix A: Parameter Settings.............................................................................................................. 13
1
Brief introduction
Y32 smart machine is a type of printer suitable for lottery industry. The main screen is
7-inch LCD screen vertical screen, the auxiliary screen is HDMI 4K HD display interface. The
Android system supports mobile, China Unicom, telecommunications three 4G communications
network. Y32 has 100M wired network port, Wi-Fi/BT4.0, and USB standard interface. The 500W
camera module support scanning one-dimensional code, two-dimensional code. Y32 also
support paper near function and accurate measurement, black mark 6 position adjustable
(positive and negative 3 positions), paper width compatible 80mm and 82.5mm, and the effective
width is 72mm, paper roll diameter is 120mm.
Chapter 1 Features and performance
1.1 Printing Performance
Printing method: direct thermal printing
● Paper width: 80mm/82.5mm
● Print density: 8 points/mm, 576 points/line
● Print speed: 150mm/s (maximum)
● Reliability:
(1) Print head life: 100km
Conditions of Use:
* Print 12×24 Spanish characters, print 50 lines each time, repeat printing intermittently.
* Use specified thermal paper
(2) Cutter life: 1,000,000 times. Conditions of Use: Less than 30 times per minute
● Effective print width: 72mm
Statement
This is a Class A product. In a living environment, this product may cause radio
interference. In this kind of circumstances, the user may need to take practical measures
against the interference.
2
1.2 Paper Roll
Thermal Paper Roll: Paper Width ---------- 82.5±0.5mm (Maximum)
Outer diameter ---------- Φ120mm (maximum) Φ
Inner diameter ---------- Φ13mm (minimum)
Thickness ---------- 0.06mm～0.08mm
1.3 print characters
● Western character set:
12 × 24 dots, 1.5 (width) × 3.00 (high) mm
● Chinese characters:
24 x 24 dots, 3.00 (width) x 3.00 (height) mm
1.4 Interface Mode
● USB-TypeB interface:
The standard USB print interface
● HDMI-TypeA interface:
One HDMI 2.0 supports 4K 60Hz display and supports HDCP 1.4/2.2.
● Ethernet interface:
Isolate the standard Ethernet interface.
● USB-TypeA interface:
There are 4 standard USB host interfaces.
● Bluetooth interface:
Realtek Realtek RTL8723BS series Bluetooth Bluetooth module SDIO interface. Bluetooth4.0
(supports iBeacon+eddystone protocol)
● WIFI interface:
Realtek Realtek RTL8723BS series Bluetooth Bluetooth module SDIO interface.
IEEE802.11b/g/n.
● 4G network
One of the 4G Internet access modules which supported the PCIE interface such as CE20C,
U9300W, and USB DOGNLE CLM920, can be connected to the Internet. Can switch
between WiFi, Ethernet, GPRS and 4G smoothly; select data link according to the priorities
of Ethernet, WiFi, 4G and GPRS.
3
● Camera interface:
The 500W camera module interface recognizes one-dimensional and two-dimensional
barcodes as follows:
1. One-dimensional code 1D product: UPC-A, UPC-E, EAN-8, EAN-13.
2. One-dimensional code 1D industrial: Code 39, Code 93, Code 128, Codabar, ITF,
RSS-14, RSS-Expanded.
3. Two-dimensional code 2D: QR Code, Chinese QR Code, Micro QR Code, Big Data QR,
Data Matrix, Aztec (beta), PDF417 (beta).
4. Can quickly respond to one-dimensional code and two-dimensional code
scanning in 0.5-1 seconds, scan distance is within 15cm.
● Cash box control:
Power supply DC24V1A, interface type 6-wire RJ-11 socket.
● Speaker
Built-in cavity speaker larger than 2W (output volume at four points around the printer
around the front and back and left and right, the maximum volume is not less than 90
dB)
●Display screen:
MIPI interface, resolution 720*1280 (vertical screen)
● Touch screen:
5-point capacitance type touch screen, G+G specification fully-fitted process.
● Operating System
Android 5.1 or above and support OTA upgrade.
● Processor
RK3288 quad-core Cortex-A17, clocked at up to 1.8GHz, Mali-T764 GPU, supports
AFBC (Frame Buffer Compression), OpenGL ES 1.1/2.0/3.1, OpenCL, DirectX9.3,
embedded high-performance 2D acceleration hardware.
● Memory
DDR3, 2GB
●Storage
8GB eMMC
● TF card interface
Supports up to 32GB
● Internal clock
Supports automatically determining the date and time of the network. The RTC time can
be maintained for at least 1 month without loss after power off.
4
1.5 Print Control Commands
● character print command:
Supports double-width and double-height printing of ANK characters, custom characters,
and Chinese characters, and can adjust the line spacing of characters.
● Dot print command:
Supports different density dot plots and download graphics printing.
●GS barcode printing command:
Support UPC-A, UPC-E, EAN-13, EAN-8, CODE39, ITF25, CODABAR, CODE93,
CODE128, PDF417, QR Code, DATA Matrix barcode printing.
1.6 Power Requirements
Power adapter DC24V ±10%, 2.5A, DC005-2.5 power outlet
1.7 Working Environment
● Operating temperature:
0°C～50°C Operating Relative Humidity: 10%～80%
● Storage temperature:
-20°C～60°C Storage Relative Humidity: 10%～90%
1.8 Dimensions
275（L）mm×140（W）mm×150（H）mm
1.9 Model Name
Model
Interface
SP-Y32
USB-TypeA、HDMI、USB-TypeB、Ethernet、Cash
Drawer
5
Chapter 2 Operating Instructions
2.1 Printer appearance
The names of printer parts are shown in Figure 2-1
6
Figure 2-1 Name drawing of each part of the printer
2.2 Install the paper roll
2.2.1 Install paper roll
The SP-Y32 uses 80mm/82.5mm wide thermal paper roll.
Thermal paper installation steps are as follows:
Press the right cover open button to open the paper cover, put the thermal paper roll into the
paper warehouse, pull a section from the paper roll, then put the paper end on the head, cover
the paper cover, Gently press down.
1. Pay attention to the direction of loading paper, make the printing surface
face to the print head.
2. Please don’t feed or draw the paper forwards or backwards with hands.
3. Keep clean of the print head, avoid to influence the printing quality.
7
2.2.2 Cutter jamming
If the cutter is stuck, turn off the power switch, re-power, the cutter can return to its original
position.
2.3 Interface connection
2.3.1 USB-TypeA
The Y32 supports four USB-TypeA master interfaces. Each pin is defined as shown in Figure 2-2.
PIN
Assignment
Function
Mark
1
V Bus
Power
Positive5
V
2
Data -
Data
Negative
3
Data +
Data
Positive
4
GND
Power
Ground
Figure 2-2 USB-TypeA
2.3.2 Ethernet Interface
The network port configuration uses an RJ45 network socket. The appearance is
shown in Figure 2-3:
Figure 2-3 Ethernet
2.3.3 USB Interface
The standard configuration of the Y32 smart one is equipped with a standard USB printer
cable D-type data cable for connecting the printer and the host device. The printer's USB is a
8
slave device type (DEVICE); the outline and pin definitions are shown in Figure 2-4:
PIN
Assignment
Function
Mark
1
V Bus
Power
Positive
5V
2
Data -
Data
Negative
3
Data +
Data
Positive
4
GND
Power
Ground
Figure 2-4 USB-TypeB
2.3.4 Bluetooth
A handheld device, laptop, or other information terminal with a Bluetooth interface can
communicate with the all-in-one through a Bluetooth interface. Y32 smart machine Bluetooth 4.0
is compatible with the Bluetooth 2.0 Bluetooth specification, the power level is CLASS 1.5 or
CLASS 2, and the effective distance is 10m. The initial device name of the all-in-one is rk3288.
You can modify the device name as needed.
The Y32 smart all-in-one needs to be paired with the Bluetooth device of the control
all-in-one before it works. Pairing can be initiated by either party. The usual pairing process is as
follows:
1. The Bluetooth device of the all-in-one and control integrated machine is turned on.
2. The bluetooth device of the all-in-one or control one machine searches for an external
Bluetooth device and selects the corresponding Bluetooth device.
3. Confirm and receive pairing on the Bluetooth device or the all-in-one of the control device.
2.3.5 WIFI
The common WIFI interface and WIFI connection network mode are the same as ordinary
mobile phone connection WIFI. After finding a suitable WIFI hotspot AP, the corresponding
authentication password can be entered to complete the WIFI login.
Table des matières
Manuels Terminal tactile populaires d'autres marques
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Manuel utilisateur
Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur
Heisei Electronics
Heisei Electronics Q-POS 815 Manuel utilisateur
Amano
Amano MTX-15 Manuel utilisateur
FLOWBIRD
FLOWBIRD CWT Compact Touch Manuel utilisateur
Demco
Demco SP7 Manuel utilisateur
