SPRT SP-T6 Manuel utilisateur
1
SPRT®
SP-T6
Portable Thermal Printer
User’s Manual
Beijing Spirit Technology Development Co.,Ltd
www.sprinter.com.cn
2
Content
Operating Precautions......................................................1
Notes on Safety..................................................................1
Notes on Using...................................................................1
Notes on Handling..............................................................3
Chapter 1 Outer Appearance and Model ............................4
1.1 Outer Appearance .......................................................4
1.2 Model Classification......................................................4
Chapter 2 General Specifications........................................5
2.1 Specifications................................................................5
2.2 Other Specificaions.......................................................8
Chapter 3 Operation............................................................9
3.1 Using Preparation.........................................................9
3.1.1 Battery Installation .................................................9
3.1.2 Paper Installation...................................................9
3.2 Operation Specifications.............................................10
3.2.1 Printer On.............................................................10
3.2.2 Printer Off.............................................................11
3.2.3 Self-test................................................................11
3.2.4 Paper Feeding(Manual Feed)..............................11
3.2.5 Battery Charging..................................................12
3.2.6 System Parameters Setting.................................12
3.2.7 Quit System Parameters Setting.........................12
3
3.3 Printer Setting.............................................................12
3.4 Printer Interface Connection and Printing..................13
3.4.1 RS-232 Serial.......................................................13
3.4.2 USB Connection ..................................................13
3.4.3 Bluetooth..............................................................13
3.4.4 Function of Bluetooth Address Binding...................14
3.5 Indicators and Buzzer.................................................14
3.6 Magcard Operation.....................................................16
3.6.1 Functions of the Magcard....................................16
3.6.2 Reading Magcard Information.............................16
3.7 IC Card Operation .....................................................17
Chapter 4 Other Informations............................................21
4.1 Printer Developing Guide ...........................................21
4.2 Description of Black Mark Pre-print............................21
Appendix...........................................................................24
1
Operating Precautions
Please read this chapter carefully before using the
printer!
Notes on Safety
Be sure to use the specified battery and power supply
provided by our company. Connection to an improper power
supply may cause fire, explosion or damage to the printer.
Don‟t put the battery into the fire or water, don‟t disassemble
or modify the battery, don‟t be short circuit, otherwise may
result in injury or fire even explosion.
If the printer would not be used for a long time, be sure to
take off the battery, otherwise the battery may leak liquid
which is corrosive, if improper operation causes battery leak,
and the liquid is spattered on the skin or clothes, please wash
it with water, if spattered in the eyes, please rinse them with
water thoroughly and see a doctor.
Please do not open the paper case cover when it is printing
or just when printing is over, do not touch the print head with
hand or body, overheat may cause scald.
Notes on Using
Be sure not to print continuously over 1 meter, otherwise may
cause damage to the print head.
2
Water or other liquid should not spill into the printer, also the
printer should not be appeared in the rain, or else may cause
printer damage.
Please do not open the paper case cover when it is printing,
otherwise the printer may work improperly.
If print with serial interface, should not unplug the interface
cable in the course of printing, or else some printing data may
be lost.
When print in Ir or IrDA mode, be sure the Ir window of the
host equipment face rightly the Ir window of the printer, the
distance should be within the range of 50mm, and the angle
should be within the range of 30o.
When print with Bluetooth interface, the communication
distance should be within 10 meters, otherwise the printer
doesn‟t print or prints rubbish codes.
Too high（45℃）or too low（5℃） temperature and too high
(85％)or too low (20％) relative humidity both effect the print
quality.
The print paper in poor quality or stored for too long time also
may reduce the print quality even damage the printer.
In the black mark detecting mode, the printer requires that
the ready-print black mark is accordant with the black mark
printing rules (details please refer to Chapter 5), otherwise
the black mark can not be detected correctly.
3
Be sure to use up the electricity of the battery before charge it,
as it can ensure the using life of the battery.
Notes on Handling
The printer should be placed in such an environment that the
temperature is between -20℃and 60℃, and the relative
humidity is between 5% and 95%.
If the printer will be stored for a long time, pleas be sure to
take out the battery, otherwise may damage the battery and
printer.
Normal thermal paper can‟t be kept too long, if you need to
keep the receipt for a long period, please choose long term
effective thermal paper.
The print paper should be keep away from high temperature
environment and point-blank sunshine.
4
Chapter 1 Outer Appearance and Model
1.1 Outer Appearance
1.2 Model Classification
By now, all the models can support serial and USB.
SP-RMT6xx XX
BT——Serial, USB, Bluetooth
Blank——Only Serial and USB
SM——Smart IC Card and Magnetic Card,
with LCD display
M——Only Magnetic Card
5
Chapter 2 General Specifications
2.1 Specifications
Print
Printing Method
Thermal Line
Printing Speed
50mm/sec
Resolution
8dots/mm,384dots/line,203dpi
Effective Printing
Width
48mm
Character
Print Font
ANK: 12*24 ,9*24 Chinese:
24 x 24
Character per Line
32/42
Paper Spec
Paper Type
Thermal paper
Paper Width
57.5±0.5mm
Paper Roll
Diameter
Max: 40.0mm
Roll Core Inner
Diameter
13mm(min.)
Paper Thickness
0.06 to 0.07mm
Paper Supply Method
Drop-in Easy loading
Reliability
Smart Card
ISO 7816 Compliant (EMV
level 1 Certified) /Life is more
than 100000 times
MSR
ISO7810/7811/7812
1&2&3&Track Reading Life
is more than 300000 times
MCBF
15 million lines
6
Auto-cutter
N/A
TPH
50km
Barcodes
1-D:UPC-A UPC-E EAN-13
EAN-8 CODE39 ITF25
CODABAR CODE93
CODE128
2-D:PDF417、QR code、DATA
Matrix
human-ma
chine
interface
Button
POWER, FEED, MODE
Indicator
ERROR, POWER
LCD
128X32 Dots FSTN (Blue
LED Backlight)
Display Content
printer status(serial,
Bluetooth, paper out error),
baud rate, speed, density,
battery capacity
Memory
FLASH : 512kb, RAM :128kb
Receive buffer size
16KB
Emulation
ESC/POS
Driver
Windows 98 / ME / 2000 / NT /
XP / 2003Server / VISTA
SDK
WinCE 4.2, WinCE 5.0,
Symbian, Linux
Multilanguage
21 codepages
Setup Software
support set bitmap download,
7
baud rate, font, speed,
density, password, black
mark, Bluetooth etc.
Sensor
Paper End Sensor
Interface
RS-232,USB, Bluetooth
Power Adaptor
DC9V/2A
Battery Power
1500mAh/7.4V
Battery Duration
90 meters continuous printing
Battery Charging Time
less than 3 hours
Battery One Charge Standby
Time
about 100hours
Drop Duration
1.2 meters
Accessorie
s
Standard
paper, power
supply(Adapter),serial cable,
leather case
Optional
vehicle charger ,external
charger ,battery, CD-ROM,
USB cable
Physical
Weight
270g(excluding roll paper)
Dimension
(WxLxH)
87×119×50mm
Color
Black
Environme
nt
Operating Temp
0~ 50 °C
Storage Temp
-20~60°C
Operating
10~80%
Table des matières
Autres manuels SPRT Imprimante
SPRT
SPRT SP-T8 Manuel utilisateur
SPRT
SPRT SP-RMT12 Manuel utilisateur
SPRT
SPRT SP-POS891 Manuel utilisateur
SPRT
SPRT SP-POS801 Manuel utilisateur
SPRT
SPRT SP-Y33 Manuel utilisateur
SPRT
SPRT SP-T7 Manuel utilisateur
SPRT
SPRT SP-R301 Manuel utilisateur
SPRT
SPRT SP-D10 Manuel utilisateur
SPRT
SPRT SP-POS88III Manuel utilisateur
SPRT
SPRT POS890 Manuel utilisateur
SPRT
SPRT SP Series Manuel utilisateur
SPRT
SPRT SP-POS892 Manuel utilisateur
SPRT
SPRT SP-POS58IV Manuel utilisateur
SPRT
SPRT SP-POS88? Manuel utilisateur
SPRT
SPRT SP-POS587 Manuel utilisateur
SPRT
SPRT SP-RMT10 Manuel utilisateur
SPRT
SPRT SP-EU804 Manuel utilisateur
SPRT
SPRT SP-RMD9 Manuel utilisateur
SPRT
SPRT SP-POS58III Manuel utilisateur
SPRT
SPRT SP-EU58III Manuel utilisateur
