Spectros T-Stat 2.0 Manuel utilisateur
2 Be Sure 2.0
Align the red line on the sensor with red arrow on the front
panel. Insert the sensor all the way and rotate 90° clockwise
until the red line points to the stop sign.
Sensor ID Process
Sensor Placement
CONNECTING A SENSOR
Inserting Sensor
Sensor Connector Port
Power Button
Power Switch
Plug in the monitor and turn the power toggle switch
to the “on” (-) position at the back of the monitor.
Press the circular start button
at the top right of the monitor.
When powered the button will
light up blue.
Self Test at Boot-up
TURNING ON T-STAT
Charge Level
Battery Exhausted
Battery Charging
Transmitting
Signal Strength
You may change the chart time span
from 30 minutes up to 5 days.
Select from the drop down menu.
Slecting the alarm icon will silence
the alarm for two minutes.
Further options can be found by
selecting “ALARM LIMITS”
SCREEN ELEMENTS
Tissue
Saturation
Hemoglobin - Hb
You may PAUSE and START throughout and the screen data will stay collective. Once you are
nsihed select DONE. The dispalyed data will nolomnger be available once DONE is selected.
St02
Hb
ALARM LIMITS
ONCALL ACCESS
ONCALL SETUP AND CONNECTING
ADJUSTING ALARM LIMITS
2 Be Sure 2.0
Autres manuels pour T-Stat 2.0
1
Autres manuels Spectros Instrument de mesure
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur