Spectros SF-ExplorIR Guide de dépannage

SF-Explor

™

Sulfuryl Fluoride Safe Entry Monitor

Operation & Maintenance

Version 7.31 - JAN 2016

Oppm

9/16/2015 9/16/2015

Master (14’ x 12’)

Bedroom

Jackson Homestead

9/15/2015

Single family house.

Good seal.

Jackson Homestead

10 Downing St.

Hopedale, MA

SAVE

SCAN

42.1306 N

71.5417 W

ADD JOB

Date Shot

Date Clear

Notes

Address

Job Details Location Details

Name

Job Name

Location

Notes

Scanned

Concentration

Latitude

Longitude

ClearSite Web Application

Distributed by:

Air-Met Scientic Pty Ltd

Work with Confidence

Air-Met Sales/Service

P: 1800 000 744

F: 1800 000 774

E: [email protected]

Air-Met Rental

P: 1300 137 067

E: [email protected]

W: www.airmet.com.au

WARRANTY

Spectros Instruments, Inc. warrants to Buyer that at the time of delivery this Product will be free from

defects in material and manufacture and will conform substantially to Spectros Instruments' applicable

specifications. Spectros Instruments’ liability and Buyer's remedy under this warranty are limited to the

repair or replacement, Spectros Instruments’ option, of this Product or parts thereof returned to Seller at

the factory of manufacture and shown to Spectros Instruments’ reasonable satisfaction to have been

defective; provided that written notice of the defect shall have been given by Buyer to Spectros

Instruments within one (1) year after the date of delivery of this Product by Spectros Instruments. NOTE:

Battery Warranty is for six (6) months.

Spectros Instruments, Inc. warrants to Buyer that it will convey good title to this Product. Spectros

Instruments’ liability and Buyer's remedy under this warranty of title are limited to the removal of any

title defects or, at the election of Spectros Instruments, to the replacement of this Product or parts thereof

that are defective in title.

The warranty set forth in paragraph 1 does not apply to parts the Operating Instructions designate as

having a limited shelf life or as being expended in normal use (e.g., filters).

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND ARE GIVEN AND ACCEPTED IN LIEU OF

(I) ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT

LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE: AND (II) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY IN

CONTRACT OR TORT, WHETHER OR NOT ARISING FROM SPECTROS INSTRUMENTS’

NEGLIGENCE, ACTUAL OR IMPLIED. The remedies of the Buyer shall be limited to those provided

herein to the exclusion of any and all other remedies including, without limitation incidental or

consequential damages. No agreement varying or extending the foregoing warranties, remedies or this

limitation will be binding upon Spectros Instruments, Inc. unless in writing, signed by a duly authorized

officer of Spectros Instruments, Inc.

www.SpectrosInstruments.com

Notice:

Product improvements and enhancements are continuous; therefore the specifications and

information contained in this document may change without notice.

Spectros Instruments, Inc. shall not be liable for errors contained herein or for incidental or consequential

damages in connection with the furnishing, performance, or use of this material.

No part of this document may be photocopied, reproduced, or translated to another language without

the prior written consent of Spectros Instruments, Inc.

iii

Notice Regarding Sulfuryl Fluoride

Sulfuryl Fluoride is an odorless gas that has no warning properties. There is a danger of serious damage to

health by prolonged exposure through inhalation.

The SF-ExplorIR™ Monitor provides accurate, real-time sulfuryl Fluoride concentration measurements.

Only qualified and trained operators are, with proper use of the SF-ExplorIR™ Monitor, able to re-

enter and provide final clearance of fumigated spaces.

The SF-ExplorIRTM Monito is a continuous read and continuous motion clearance device per SF

label requirements.

Principal of Measurement

The Spectros Instruments Sulfuryl Fluoride (SO2F2) Clearance Monitor (SF-ExplorIR™) is designed

to detect, quantify and display the concentration of SO2F2 gas in the area being monitored.

The SF-ExplorIR

™

monitor uses non-dispersive infrared (NDIR) technology to detect low level

concentrations of sulfuryl fluoride and allows the final clearance and safe re-entry of fumigated spaces. The

concentration of sulfuryl fluoride is calculated according to absolute Laws of Physics. The calculation

compares a reference sample “zero air” (clean air in the internal air bag) against a sample reading.

Operation of Monitor

During normal operation the SF-ExplorIR™ displays both the current gas level and the peak gas level

detected on its front panel LCD. The monitor retains a log of previous readings that can easily be accessed

at a later time for analysis. Front panel indicators and an audible alarm are provided to signal gas alarm

and instrument fault conditions.

Aeration and Re-entry

Fumigators who are re-entering fumigation and risk areas to check for sulfuryl fluoride gas concentrations

must wear SCBA (Self Contained Breathing Apparatus) for respiratory protection until the concentration

within the structure has been confirmed to be 1 ppm or less. Please consult appropriate gas manufacturer’s

labels, state, and federal requirements.

Correct Re-Zero Operation

The “zero air” sample needs to be of the same temperature and

relative humidity as the air to be measured for sulfuryl fluoride.

Purging the SF-ExplorIR™ after warm-up with previous held air inside the monitor is not the same as

forcing a Bag Empty and refilling with clean air known to be free of SF.

In cases where the monitor is taken from a cooler (air conditioned environment and set to work; the end-

user should empty the internal air bag content prior to use and refill with a know clean air sample at the

same temperature and relative humidity as the sample area to be measured.

Please consult operation manual and/or distributor for this procedure.

Notice for First Time Use of Battery

The SF-ExplorIR™ monitor is shipped with a partially charged battery and should be charged by the end-

user for at least 2 continuous hours prior to first use. If after this time the green LED’s are not observed

then depress the TEST button on the battery pack and hold until they appear. Repeat if necessary.

Compliant Battery

Spectros Instruments has determined and set the correct voltage and polarity needed for compliant battery

performance. Only a Spectros Instruments provided battery should be used. Use of another battery will

automatically void any warranty and may result in severe damage to the monitor.

TABLE OF CONTENTS

INTRODUCTION ...........................................................................................................................................2

How to Use This Manual ......................................................................................................................................... 2

Warning Statements ................................................................................................................................................ 2

Caution Statements ................................................................................................................................................. 2

Hazard Symbols on Monitor .................................................................................................................................... 2

Safety Precautions ................................................................................................................................................... 3

Explosive Atmosphere.......................................................................................................................................... 3

Misuse and Modifications to Monitor .................................................................................................................. 3

Altitude Limit ....................................................................................................................................................... 3

Cleaning................................................................................................................................................................ 3

Shipping Precaution............................................................................................................................................. 3

Features and Capabilities.................................................................................................................................... 3

Functional Overview ............................................................................................................................................ 3

Specifications............................................................................................................................................................ 4

OPERATION .................................................................................................................................................5

Front Panel Display and Controls .......................................................................................................................... 5

Inspection ................................................................................................................................................................. 5

Gas Detector Operation............................................................................................................................................ 6

Work with Gas Alarms and System Faults............................................................................................................. 7

Time Weighted Average Operation ......................................................................................................................... 7

Overview ............................................................................................................................................................... 7

Starting a New or Continuing TWA/twa............................................................................................................. 7

Battery – Testing and Charging .............................................................................................................................. 7

Initializing the Battery ........................................................................................................................................7

Testing the Battery .............................................................................................................................................. 7

Battery Pack Safe ................................................................................................................................................ 8

Display Screens ........................................................................................................................................................ 9

Initial Power Up ................................................................................................................................................... 9

Filling the Purge-Air Bag..................................................................................................................................... 9

Data Display Screen........................................................................................................................................... 10

Function Screens ................................................................................................................................................ 10

Working with the DIAG Function ......................................................................................................................... 12

Leak Detector Operation........................................................................................................................................ 13

Standby Mode......................................................................................................................................................... 13

Working with the Gas Alarm................................................................................................................................. 14

Gas-Alarm Light................................................................................................................................................. 14

Silencing a Gas Alarm........................................................................................................................................ 14

Silencing a Fault Alarm ..................................................................................................................................... 14

Working with System Faults ................................................................................................................................. 14

Functional Overview .......................................................................................................................................... 14

Viewing the Faults Log ...................................................................................................................................... 14

Fault Codes......................................................................................................................................................... 15

Clearing the PPM Log & Faults Log ..................................................................................................................... 16

Working with the DIAG Function ......................................................................................................................... 16

Overview ............................................................................................................................................................. 16

Keypad Functions............................................................................................................................................... 16

First Diagnostic Screen...................................................................................................................................... 16

Second Diagnostic Screen .................................................................................................................................. 17

Working with the P-CHK Function ....................................................................................................................... 17

Overview ............................................................................................................................................................. 17

Keypad Functions............................................................................................................................................... 17

Using the P-CHK Screen to Diagnose Flow Faults…………………………………………………………...…….......18

Screen Display .................................................................................................................................................... 18

OPTION: ClearSite Mobile Application ................................................................................................................ 19

Downloading the ClearSite Application form ................................................................................................... 19

Mobile Screen Shots............................................................................................................................................... 20

Return Authorization ............................................................................................................................................. 21

Routine Maintenance ............................................................................................................................................. 21

Calibration Verification ......................................................................................................................................... 21

Compliant Software................................................................................................................................................ 21

PART NUMBERS........................................................................................................................................22

Introduction

How to Use This Manual

This manual provides important information on how to operate the SF-ExplorIR™ Monitor.

To assure operator safety and the proper use of the monitor, please read, understand, and follow the

contents of this manual.

If you have a working knowledge of gas monitors, you will find this manual useful as a reference tool. If

you are new to the use of gas monitors, you can educate yourself about the principles of gas detection and

the proper operation of this device by reading this manual thoroughly.

Warning Statements

The use of the word WARNING in this manual denotes a potential hazard associated with the use of this

equipment. It calls attention to a procedure, practice, or condition, or the like, which if not correctly

performed or adhered to, could result in personal injury or death.

Caution Statements

The use of the word CAUTION in this manual denotes a potential hazard associated with the use of this

equipment. It calls attention to a procedure, practice, condition, or the like, which if not correctly

performed or adhered to, could result in damage to the equipment.

Hazard Symbols on Monitor

This symbol indicates the need to consult this operating instruction

manual when opening the enclosure.

WARNING: A potential risk exists if the operating instructions are

not followed.

This symbol indicates the presence of electric shock hazards when

the enclosure is opened.

WARNING: To avoid risk of injury from electric shock, do not open

the enclosure when power is applied.

Please contact Spectros Instruments (www.SpectrosInstruments.com) with any questions.

Safety Precautions

Explosive Atmosphere

Do not operate this equipment in the presence of flammable liquids, vapors or aerosols. Operation of any

electrical equipment in such an environment constitutes a safety hazard.

Misuse and Modifications to Monitor

The protection provided by the monitor may be impaired if the monitor is used in a manner not specified by

these instructions. Changes or modifications to this monitor will void the warranty.

Altitude Limit

6,562 ft (2,000 m)

Cleaning

To clean the outside of the case, DO NOT use soap and water. USE a dry cloth

Your SF-ExplorIR Safe Entry Monitor was carefully inspected at the factory before shipment, and packed so

as to be highly resistant to damage while in transport. When you receive the instrument, however, please

unpackit promptly and make a visual inspection to make sure that no damage has occurred during

shipment. Also check that all the following items have been received.

Shipping Precaution

When shipping the instrument by air, deflate the purge-air bag to prevent it from bursting due to changes

in air pressure. Deflate the bag by selecting the EMTYBAG function as described on Page 11.

Features and Capabilities

•Detects, measures, and displays the level of sulfuryl fluoride gas in the area being monitored

•Measurement range of 0–100 ppm with a resolution of 1 ppm

•Self contained purge-air bag, allowing the monitor to be used in a contaminated atmosphere

•Automatically logs up to 200 gas readings that can be printed / plotted for analysis (Option)

•Eliminates false alarms with use of non-dispersive IR source and sample draw system

•Visual and audible gas alarm indictors that are turned ON when the detected gas level exceeds user

defined trip-point.

•Extensive self diagnostics, providing both visual and audible indications when a fault occurs

•Battery powered, providing at least 6 hours of operation

•Optional cell phone application (ClearSite) for web based data logging and reporting

Functional Overview

The Spectros Instruments Sulfuryl Fluoride (SO2F2) Portable Monitor (SF-ExplorIR™) is designed

to detect, measure, and display the concentration of SO2F2 gas in the area being monitored. To ensure

accurate gas measurements, the monitor self-zeros every 4 minutes using its internal supply of fresh air.

Front panel indicators and an audible alarm are provided to signal gas alarm and instrument fault conditions.

The audible alarm can temporarily be silenced by a push of a button, but will reactivate if the

gas level is still above the alarm trip point after a user-defined time period has elapsed.

The SF-ExplorIRTM Monitor requires only minor periodic maintenance such as the annual replacement of

internal particle filter and fresh air bag. The monitor incorporates active diagnostics that continuously check

the system for proper operation. A front panel indicator is provided to alert an operator of system

malfunctions, and fault codes are generated that enable the operator to quickly identify the cause of the fault.

Specifications

Product Type........................ Portable sulfuryl fluoride (SO2F2) (Vikane™) (Profume™) (ZythorTM)

(MasterfumeTM) gas monitor

Measuring Range ................ 0 to 100ppm sulfuryl fluoride

Warm-Up Time.................... 15 minutes (900 second clock countdown)

Operating Time ................... 30 plus minutes before the purge-air bag needs refilling

Detector Type ...................... Infrared, Non-Dispersive (NDIR)

Sensitivity............................ 1 ppm with ReZero

Response Time..................... 90% of response within 5 seconds; 100% in 7 seconds

Temperature Drift............... 1.5 ppm per °C between purge cycles

System Noise ....................... Less than 40dB(A) at 10 ft (3 m)

Operating Temp .................. 32 to 122°F (0 to 50°C)

Ambient Humidity .............. 5 to 90% RH (non-condensing)

Altitude Limit...................... 6,562 ft (2,000 m)

Power ................................... DC battery, provides at least 6 hours of operation

Power Consumption ............ 15 Watts

Front Panel.......................... 3 Indicator lights:

ON – Green light flashes during warm-up, and then glows steady

during normal operation

FAULT – Yellow light flashes when there is a system fault

ALARM – Red light flashes when the detected gas level reaches the

alarm level (alarm level factory set at 5 ppm)

Audible Alarm ..................... Internal audible alarm activated when a gas-alarm (5 ppm) occurs

Dimensions .......................... 8D x 19L x 5W inches (203 x 483 x 127 mm)

Weight.................................. Less than 9 lbs (4 kg) including battery

Valid Calibration Period......12 months

Warranty.............................. 1 Year from date of shipment SF ExplorIR, Battery 6 months

Operation

Front Panel Display and Controls

*Enter the Control/Setup Menu Mode by pressing

the LEFT and RIGHT arrow buttons at the same time.

Inspection

The SF-ExplorIR ™ unit has been thoroughly inspected and tested prior to shipment from the factory.

Nevertheless, it is recommended that the monitor be re-checked prior to use. Inspect the outside of the

enclosure to make sure there are no obvious signs of shipping damage. If damage is discovered, please

contact your supplier for assistance.

DISPLAY

SCREEN

ENTER

When in the Control/Setup Menu

Mode*, press to save a

displayed value

KEYPAD

When in the Control/Setup Menu

Mode*, use these buttons:

•To move the arrow (>) on the

display screen to the desired

function

•Scroll through data

•Change a function’s value

MONITOR ON

LIGHT (Green)

Flashes during

warm-up

SYSTEM FAULT

LIGHT (Yellow)

ALARM LIGHT (Red)

SILENCE / ESC

Press this button:

•To temporarily silence the

audible alarm

•Return to the previous

screen without saving data

Power ON/OFF

Toggle Switch

Table des matières

Autres manuels Spectros Instrument de mesure

Spectros

Spectros T-Stat 2.0 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur