Speco HT7040H Manuel utilisateur
INSTRUCTION
MANUAL
SPECO 960H Series
4QFDP5FDIOPMPHJFTJTDPOTUBOUMZEFWFMPQJOHQSPEVDUJNQSPWFNFOUT
8FSFTFSWFUIFSJHIUUPNPEJGZQSPEVDUEFTJHOBOETQFDJGJDBUJPOTXJUIPVUOPUJDFBOEXJUIPVUJODVSSJOHBOZPCMJHBUJPO 3FW
HT7040H
(960H Outdoor IR Bullet Camera)
HT671H/HT670H
(960H Outdoor IR Dome Camera)
HT649H/HT648H
(960H Indoor IR Dome Camera)
HT5940H/HT5935H
(960H Small Outdoor IR / Non IR Dome Camera)
Contents
- 1 -
Ł
Contents...................................................... 1
Ł
Precautions ................................................. 2, 3
Ł
Safety Instructions ...................................... 4
Ł
Package Contents....................................... 5
Ł
Camera Installation ..................................... 6-12
Ł
.............................................. 13-16
Ł
Camera Dimension ..................................... 17-18
Ł
Features...................................................... 19
Ł
OSD Menu Details ...................................... 20- 34
Ł
Trouble Shooting......................................... 35
- 2 -
Precautions
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-4°F and +140°F. Be especially careful to
provide ventilation when operating under
high temperatures.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.
- 3 -
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
ōDo NOT use power sources other than those specified.
In USA and Canada, Use Class 2 Power Supply Only
- 4 -
Safety Instructions
1SFDBVUJPOTGPSVTF
1MFBTFIBOEMFUIJTDBNFSBDBSFGVMMZ
Ł
ŁThere are no user serviceable parts inside
ŁDo not disassemble this camera other than to make initial adjustments
ŁUse a UL approved regulated 24 volt AC or 12 volt DC power supply
Ł
Ł
Please insure that your installation area can support the weight of the camera
ŁDo not use a strong or abrasive detergent when cleaning the camera
ŁDo not install near cooling or heating device
- 5 -
Package Contents
Please make sure that the following items are included in the Package:
1) HT7040H
- 4 Tapping Screws 4x25
- 4 Hexagon Socket Screws M5x10
2) HT671H , HT670H
- 3 Tapping Screws 4x40
- 1 Hexagon Socket Screw M4x8
3) HT649H, HT648H
- 3 Tapping Screws 4x25
4) HT5940H, HT5935H
- 3 Tapping Screws 3.5x20
- 6 -
CAMERA INSTALLATION
jvuulj{Gwv~lyGjhislG
XUG~oluG|zpunGXYG}vs{zGkjGOGG\WWGhPG
YUG~oluG|zpunGY[G}vs{zGhjGO[WG}GhP
ZUGjvuulj{G}pklvGjhislG
T jvuulj{GiujGjhislG{vG{olGiujGqhjrUG
kjGXY}GwGz
wGpGaylk
j GaGORP
ishjraOTP
ylkORP
wGz
hjGY[}
- 7 -
CAMERA INSTALLATION
Compatibility
1) HT7040H
2) HT671H, HT670H, HT649H, HT648H
INTCM
CVCJBD
INTJBS
INTPMDFM
CVCJBB
INTCM
INTWM
- 8 -
CAMERA INSTALLATION
Compatibility
3) HT5940H, HT5935H
CVCJBD
ȥ
Adaptor plate with rubber
- 9 -
1. HT7040H
TAPPING SCREW 4X25, 4EA
HEXAGON SOCKET SCREW M5X10, 4EA
CAMERA ASSEMBLY
CAMERA INSTALLATION
Autres manuels pour HT7040H
1
Ce manuel convient aux modèles suivants
8
Table des matières
Autres manuels Speco Caméra de sécurité
Speco
Speco LEDome Manuel utilisateur
Speco
Speco O4B6N Manuel utilisateur
Speco
Speco Flexible Intensifier O8FD4M Manuel utilisateur
Speco
Speco O8VT1 Manuel utilisateur
Speco
Speco VL-10 Manuel utilisateur
Speco
Speco 700Line IntensifierH CVC6246H Manuel utilisateur
Speco
Speco O4BM Manuel utilisateur
Speco
Speco HT-7715DNV Manuel utilisateur
Speco
Speco HT - INTB8/9/10 Manuel utilisateur
Speco
Speco O4iB2M Manuel utilisateur
Speco
Speco CVC-8WMPDV Manuel utilisateur
Speco
Speco OPTZ33D5W Manuel utilisateur
Speco
Speco HT7246H Manuel utilisateur
Speco
Speco O4P30X2 Manuel utilisateur
Speco
Speco CVC-652HZ Manuel utilisateur
Speco
Speco HT-7247IHR Manuel utilisateur
Speco
Speco HTINTT5H Manuel utilisateur
Speco
Speco O2iMT61 Manuel utilisateur
Speco
Speco ProVideo CVC-6805EX Manuel utilisateur
Speco
Speco HTSD12X Manuel utilisateur
