Speco HT770PH Manuel utilisateur
INSTRUCTION
MANUAL
700TVL Miniature Camera
4QFDP5FDIOPMPHJFTJTDPOTUBOUMZEFWFMPQJOHQSPEVDUJNQSPWFNFOUT
8FSFTFSWFUIFSJHIUUPNPEJGZQSPEVDUEFTJHOBOETQFDJGJDBUJPOTXJUIPVUOPUJDFBOEXJUIPVUJODVSSJOHBOZPCMJHBUJPO 3FW
HT770PH
(Miniature Board Camera)
CVC130H
(Miniature Weather Resistant Bullet Camera)
Contents
- 1 -
Ł
Contents...................................................... 1
Ł
Precautions ................................................. 2, 3
Ł
Safety Instructions ...................................... 4
Ł
Package Contents....................................... 5
Ł
Camera Installation ..................................... 6-12
Ł
.............................................. 13-16
Ł
Camera Dimension ..................................... 17-18
Ł
Features...................................................... 19
Ł
OSD Menu Details ...................................... 20- 34
Ł
Trouble Shooting......................................... 35
- 2 -
Precautions
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-4°F and +140°F. Be especially careful to
provide ventilation when operating under
high temperatures.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.
- 3 -
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
ōDo NOT use power sources other than those specified.
In USA and Canada, Use Class 2 Power Supply Only
- 4 -
Safety Instructions
1SFDBVUJPOTGPSVTF
1MFBTFIBOEMFUIJTDBNFSBDBSFGVMMZ
Ł
ŁThere are no user serviceable parts inside
ŁDo not disassemble this camera other than to make initial adjustments
ŁUse a UL approved regulated 24 volt AC or 12 volt DC power supply
Ł
Ł
Please insure that your installation area can support the weight of the camera
ŁDo not use a strong or abrasive detergent when cleaning the camera
ŁDo not install near cooling or heating device
- 5 -
Package Contents
Please make sure that the following items are included in the Package:
1) HT770PH
- 2 Tapping Screws M3x10
- 2 Machine Screws M2x3
2) CVC130H
- 2 Tapping Screws M3x10
CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500 mA)
2. CONNECT VIDEO CABLE
- CONNECT BNC CABLE TO THE BNC JACK.
G
kjGXY}GwGz
wGpGaylk
jGaGORP
- 6 -
SPECIFICATIONS
+73+
02'(/ HT770PH
1/3” Inch Color 960H CCD
976 (H) X 494 (V) approx. 480K pixels (NTSC)
976 (H) X 582 (V) approx. 570K pixels (PAL)
1020 (H) X 508 (V) approx. 520K pixels (NTSC)
1020 (H) X 596 (V) approx. 610K pixels (PAL)
700TV Lines
2:1 Interlace
0.00001Lux(Sens-up*256)
1.0Vp-p Composite. 75 Ohms
52dB
Low / Middle / High
OFF/AUTO (X2 ~ X256)
OFF/BLC/HLC
OFF/INDOOR/OUTDOOR
4 Zone
8 Zone
OFF/ON
Auto(AGC)/Day/Night/Ext
ATW/AWB/AWC->SET/Manual(1,800K ~ 11,000K)
1 ~ 200 Level Selectable
H-Rev / V-Rev / ROTATE
X32
OFF/ON
OFF/MANUAL/AUTO
Auto(512POINT)
DC 12V
120mA
3.7mm Fixed Cone Lens
-4ºF ~ 140ºF RH 95% Max
-4ºF ~ 140ºF RH 95% Max
1.34"(W) * 1.34"(H) * 0.75"(D)
0.66 Ibs
Sensor type
Effective pixels
Total pixels
Resolution
Scanning system
Min. illumination
Video Output
S/N Ratio
AGC
Sens-UP
Backlight Compensation
D-WDR
Motion Detection
Privacy Masking
DIS(Digital Image Stabilizer)
Day & Night
White Balance
3DNR(2D or 3D)
Mirror
D-ZOOM
SMART DZOOM
DEFOG
Blemish Compensation
Power Source
Power Consumption
Lens
Storage Temperature
Operating Temperature
Dimension(W x H x D)
Weight
Speco Technologies
(Miniature Board Camera)
3.7mm Fixed Board Lens
- 7 -
SPECIFICATIONS
&9&+
02'(/ CVC130H
1/3” Inch Color 960H CCD
976 (H) X 494 (V) approx. 480K pixels (NTSC)
976 (H) X 582 (V) approx. 570K pixels (PAL)
1020 (H) X 508 (V) approx. 520K pixels (NTSC)
1020 (H) X 596 (V) approx. 610K pixels (PAL)
700TV Lines
2:1 Interlace
0.00001Lux(Sens-up*256)
1.0Vp-p Composite. 75 Ohms
52dB
Low / Middle / High
OFF/AUTO (X2 ~ X256)
OFF/BLC/HLC
OFF/INDOOR/OUTDOOR
4 Zone
8 Zone
OFF/ON
Auto(AGC)/Day/Night/Ext
ATW/AWB/AWC->SET/Manual(1,800K ~ 11,000K)
1 ~ 200 Level Selectable
H-Rev / V-Rev / ROTATE/PIP
X32
OFF/ON
OFF/MANUAL/AUTO
Auto(512POINT)
DC 12V
120mA
3.6mm Fixed Board Lens
-4ºF ~ 140ºF RH 95% Max
-4ºF ~ 140ºF RH 95% Max
0.83"Dia * 2.87"(D)
0.13Ibs
Sensor type
Effective pixels
Total pixels
Resolution
Scanning system
Min. illumination
Video Output
S/N Ratio
AGC
Sens-UP
Backlight Compensation
D-WDR
Motion Detection
Privacy Masking
DIS(Digital Image Stabilizer)
Day & Night
White Balance
3DNR(2D or 3D)
Mirror
D-ZOOM
SMART DZOOM
DEFOG
Blemish Compensation
Power Source
Power Consumption
Lens
Storage Temperature
Operating Temperature
Dimension(W x H x D)
Weight
Speco Technologies
(Miniature Weather Resistant Bullet Camera)
3.6mm Fixed Board Lens
- 8 -
CAMERA DIMENSION
0.75”1.34”
1.34”
2.87”
0.83”Dia
0.83”Dia
1. HT770PH
2. CVC130H
- 9 -
(FOFSBM'FBUVSFT
Ǹ
700TV Lines
The combination of a 960H CCD image sensor and SPECO DSP provides an excellent resolution
of 700TV Lines.
Ǹ
3D-DNR
Smart 3DNR prevents the image blurring of moving object and activates only if moving objects
are appearing on the scene.
Ǹ
DIS(Digital Image Stabilizer) Function
Makes a stabilizing clearer and the highest picture quality when out of focus by the wind or
climate changing.
Ǹ
Smart-IR
No saturation image, vivid image in darkness. "SPECO 960H" camera makes very sharp
video image in darkness. This technology eliminates saturation of video image of the closer
object in darkness by control of the IR sensitivity. Saturation never happens in our "SPECO
960H"cameras, you can enjoy vivid image in any dark condition.
Ǹ
Sens-Up
Despite a limited & low light condition, Sens-Up - Max. x256 helps the viewer to get visible and
clear images.
Ǹ
Defog
Defog
function improve the clarity of images taken in poor conditions such as fog, smoke, rain
or snow.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Speco Caméra de sécurité
Speco
Speco O4VD1 Manuel utilisateur
Speco
Speco VL-611C Manuel utilisateur
Speco
Speco WDR-R3 Manuel utilisateur
Speco
Speco WDRB1 Manuel utilisateur
Speco
Speco INTENSIFIER HTINTB10 Manuel utilisateur
Speco
Speco O4P25X2 Manuel utilisateur
Speco
Speco CVC6146SCFF Manuel utilisateur
Speco
Speco CVC-614C Manuel utilisateur
Speco
Speco O4iT2M Manuel utilisateur
Speco
Speco O4FD5M Manuel utilisateur
Speco
Speco O2P12X Manuel utilisateur
Speco
Speco CVC-5735DNV Manuel utilisateur
Speco
Speco HT7040H Manuel utilisateur
Speco
Speco ProVideo CVC-724EXTP-2C Manuel utilisateur
Speco
Speco O2iD4M Manuel utilisateur
Speco
Speco VLB11SCSFF Manuel utilisateur
Speco
Speco 650Line Intensifier3 HTINTB8G Manuel utilisateur
Speco
Speco HT-7815DNV Manuel utilisateur
Speco
Speco VL-62 Manuel utilisateur
Speco
Speco CVC-638 Manuel utilisateur
