Speco HT5943T Manuel utilisateur

INSTRUCTION

MANUAL

Speco 3MP-TVI IR Series

Speco Technologies is constantly developing product improvements.

We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 1/13/2017

HT7043T

(IR Bullet Camera)

HT5943T

(IR Dome Camera)

Contents

◑

Contents...................................................... 1

◑

Precautions ................................................. 2-3

◑

Safety Instructions ...................................... 4

◑

Package Contents....................................... 5

◑

Camera Installation ..................................... 6-9

◑

Lens Adjustment ......................................... 10-11

◑

Specications.............................................. 12-13

◑

Camera Dimension ..................................... 14

◑

Features...................................................... 15

◑

OSD Menu Details ...................................... 16-29

◑

Trouble Shooting......................................... 30

Precautions

Do not install the camera in

extreme temperature conditions.

Do not touch the front lens of the

camera.

Never keep the camera pointed

directly at strong light.

Do not expose the camera to

radioactivity.

Do not install the camera under

unstable lighting conditions.

Do not drop the camera or subject

it to physical shocks.

Only use the camera under conditions

where temperatures are between

-10°C and +50°C. Be especially careful to

provide ventilation when operating under

high temperatures.

This is one of the most important parts of

the camera. Be careful not to leave

fingerprints on the lens cover.

It can cause malfunctions to occur. If exposed to radioactivity the CCD

will fail.

Severe lighting change or flicker can

cause the camera to work improperly.

Housing damage can compromise

weatherproof ratings.

NOTE

* If the camera is exposed to spotlight or object reflecting strong light,

smear or blooming may occur.

* please check that the power satisfies the normal specification before

connecting the camera.

Safety Instructions

Precautions for use

Please handle this camera carefully :

◑ This camera should be installed by qualied personnel only

◑There are no user serviceable parts inside

◑Do not disassemble this camera other than to make initial adjustments

◑Use a UL approved regulated 24 volt AC or 12 volt DC power supply

◑

Use appropriate low voltage power cable to prevent re or electrical shock

◑

Please insure that your installation area can support the weight of the camera

◑Do not use a strong or abrasive detergent when cleaning the camera

◑Do not install near cooling or heating device

Package Contents

Please make sure that the following items are included in the Package:

1) HT7043T

• 1 Video Test Connector, Power Jack

• 1 Focus Adjustment

• 1 Bracket Base

• 1 Wrench

• Set Screw

- 4 Tapping Screws 4x25

- 4 Hexagon Socket Screws M5x10

2) HT5943T

• 1 Video Test Connector, Power Jack

• 1 Chameleon Cover

• 1 Wrench

• Set Screw

- 3 Tapping Screws 3.5x20

CAMERA INSTALLATION

CONNECT POWER CABLE

1. WHEN USING 12 VOLTS DC (constant voltage 500mA)

2. WHEN USING 24 VOLTS AC (40 Volt Amps)

3. CONNECT VIDEO CABLE

CONNECT BLACK COLOR BNC CABLE TO THE BNC JACK.

DC 12V Power Supply

Power In put :R ED

Center : (+)

T V I

LBACK:(-)

RED(+)

Power Supply

AC 24V

CAMERA INSTALLATION

Compatibility

1) HT7043T

CVCJBB INTJBS INTCM

2) HT5943T

CVCJBD

→

Adaptor plate(59PLATE) with rubber

CAMERA INSTALLATION

CAUTION : The installation instructions in this manual are for use by qualified service

personnel only. To reduce the risk of electric shock, do not perform any servicing other

than that contained in the operating instructions unless you are qualified to do so.

3AXIS BRACKET

SCREW TS T1, 4X25, TH, SUS, 4EA

SCREW M5X10, HEXAGON SOCKET, SUS, BK, 4EA

WALL

1. HT7043T

CAMERA INSTALLATION

2. HT5943T

VANDAL DOME BASE

VANDAL DOME BODY

BODY OUTER COVER SPECO

SCREW TS T1, 3.5X20, PH, SUS, 3EA

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Speco Caméra de sécurité

Speco

Speco O8B7M Manuel utilisateur

Speco

Speco HHDI04D1B Manuel utilisateur

Speco

Speco HTD8FFI Manuel utilisateur

Speco

Speco O8D6M Manuel utilisateur

Speco

Speco HT7246H Manuel utilisateur

Speco

Speco CVC-627M Manuel utilisateur

Speco

Speco O4VT1M Manuel utilisateur

Speco

Speco HT-INTB1 Manuel utilisateur

Speco

Speco O2T7 Manuel utilisateur

Speco

Speco O4B7MN Manuel utilisateur

Speco

Speco O2VLB8 Manuel utilisateur

Speco

Speco ONSIP 02T5 Manuel utilisateur

Speco

Speco VL647iLT Manuel utilisateur

Speco

Speco O4T9M Manuel utilisateur

Speco

Speco Intensifier O2i695 Manuel utilisateur

Speco

Speco CVC-6146HR Manuel utilisateur

Speco

Speco O5D2M Manuel utilisateur

Speco

Speco O8FB1 Manuel utilisateur

Speco

Speco CVC-1805DC Manuel utilisateur

Speco

Speco HT-INTD10 Manuel utilisateur

Speco

Speco O2B6M Manuel utilisateur

Speco

Speco O8VT1 Manuel utilisateur

Speco

Speco Intensifier O2iD8M Manuel utilisateur

Speco

Speco PROVIDEO CVC-3805TP/W Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur