SP Controls SP-SW5200-VUHBT Manuel utilisateur

Users Guide
SP-SW5200-VUHBT
April, 2020 • PN: DOC-000036-01a

Page 2 SP Controls, Inc.

Page 3SP-SW5200-VUHBT Users Guide
Contents
Contents��������������������������������������������������������������������������������������������3
Introduction���������������������������������������������������������������������������������������6
Introducing the SW5200, a Multiformat HDMI, VGA, and USB-C Auto-
Switching Presentation Switcher ������������������������������������������������������������������� 6
Getting to Know the SW5200�������������������������������������������������������������������������� 7
Front View ������������������������������������������������������������������������������������������������������� 7
Back View ������������������������������������������������������������������������������������������������������� 7
Connections ����������������������������������������������������������������������������������������������������� 7
Installation�����������������������������������������������������������������������������������������8
Connecting Input Devices������������������������������������������������������������������������������� 8
Compatible Input Devices ������������������������������������������������������������������������������� 8
HDMI Extenders���������������������������������������������������������������������������������������������� 8
Connecting the Display����������������������������������������������������������������������������������� 9
Compatible Displays ��������������������������������������������������������������������������������������� 9
Image Resolutions ������������������������������������������������������������������������������������������ 9
Stereo Audio Output���������������������������������������������������������������������������������������� 9
Volume Control������������������������������������������������������������������������������������������������ 9
RS-232 Communication Interface ������������������������������������������������������������������ 9
RS-232 Port Pinout ��������������������������������������������������������������������������������������� 10
RS-232 Communication Settings������������������������������������������������������������������ 10
Power �������������������������������������������������������������������������������������������������������������� 10
Internal Settings��������������������������������������������������������������������������������������������� 10
Basic Operation������������������������������������������������������������������������������ 11
Selecting a New Source Device to Display ������������������������������������������������� 11
Selecting a New Source Device to Display
(Using IR Remote)������������������������������������������������������������������������������������������ 11
How Auto-Switching Works �������������������������������������������������������������������������� 12
Connecting to the Switcher ��������������������������������������������������������������������������� 12
Disconnecting from the Switcher������������������������������������������������������������������� 12
USB Type C Device Connection ������������������������������������������������������������������� 12
Connecting to the Switcher using USB Type C (USB-C) ������������������������������ 12
Quick-Charging Power���������������������������������������������������������������������������������� 12
Volume Control ���������������������������������������������������������������������������������������������� 13
Volume Control using IR Remote Controller ������������������������������������������������� 13
Volume Control using Switcher Settings Application������������������������������������� 13

Page 4 SP Controls, Inc.
Contents (continued)
Switcher Settings App �������������������������������������������������������������������14
Introduction���������������������������������������������������������������������������������������������������� 14
Windows Mode View (default) ��������������������������������������������������������������������� 14
Real Time Status Section������������������������������������������������������������������������������ 15
Terminal Mode View��������������������������������������������������������������������������������������� 15
Select Input (device to appear on the display) ������������������������������������������� 16
Turn Display On / O ������������������������������������������������������������������������������������� 16
Change Image Resolution����������������������������������������������������������������������������� 16
Volume Level�������������������������������������������������������������������������������������������������� 16
Mute Audio ����������������������������������������������������������������������������������������������������� 17
Display Control ���������������������������������������������������������������������������������������������� 17
Non-Use Timeout ������������������������������������������������������������������������������������������� 17
Proximity Control������������������������������������������������������������������������������������������� 17
LAN Settings �������������������������������������������������������������������������������������������������� 18
Debug Mode ��������������������������������������������������������������������������������������������������� 18
Reset ��������������������������������������������������������������������������������������������������������������� 18
Restore System to Factory Defaults ������������������������������������������������������������ 19

Page 5SP-SW5200-VUHBT Users Guide
[ This page is intenonally blank. ]

Page 6 SP Controls, Inc.
Introducing the SP-SW5200-VUHBT (SW5200), aIntroducing the SP-SW5200-VUHBT (SW5200), a
Multiformat HDMI, VGA, and USB-C Auto-SwitchingMultiformat HDMI, VGA, and USB-C Auto-Switching
Presentation SwitcherPresentation Switcher
Congratulaons and thank you for purchasing this Presentaon Switchers’ SW5200!
The SW5200 is a hybrid AV + IoT presentaon switcher which combines the power of SP
Controls audio-visual signal roung and display control.
The SW5200 Switcher is an electronic device that allows up to 3 HDMI, 1 VGA, and 1
USB Type C “source” devices, such as a laptop computer and Sony® BluRay™ player, to
share user-supplied content simultaneously on an HDMI display and/or an HDBaseT
connected display or projector (e.g. “outputs”). Where audio is included in the video
data stream (like HDMI, DisplayPort, USB-C, etc.) stereo audio from the selected device
is extracted and output on two (2) RCA connectors (le/right) designed for local sound
amplicaon. The system auto-switches to a new source when connected or powered
on.
Input port 2 (see call-out on next page) is a designed for USB Type C (USB-C) devices,
such as a Google® Chromebook™, Samsung® Galaxy™ phones, Samsung® Galaxy™ Note,
Dell® Laptops, etc. The SW5200 supplies power (up to 4 dierent voltage levels) to
these devices in accordance with USBPD 2.0 handshaking for the fastest charging capa-
bilies available up to the power available to the SW5200.
Users have numerous opons to control the SW5200. By default, the SW5200 will auto-
macally switch to any newly connected device. Users can manually select the device by
touching the Input Select buon. External control systems, like those manufactured by
SP Controls can ulize (a) the RS232 port, (b) the Ethernet port, (c) the IR port, and/or
(d) the USB 2.0 (USB-CDC) port.
Introduction

Page 7SP-SW5200-VUHBT Users Guide
Getting to Know the SW5200Getting to Know the SW5200
The graphic below points out key aributes of the SW5200.
Front ViewFront View
Back ViewBack View
ConnectionsConnections
Device Inputs and Display Outputs. Using the graphic above, connect the source devices to
the ports labeled above as, “Connect Source Devices Here”, and the display at locaon, “Display
Output”, port. Connect audio, if applicable.
Amplier or Powered Speaker Output Connecons. Connect powered speakers or amplier to
the Red and White RCA connectors denoted above as “Stereo Audio Output”.
Control Ports. Depending upon your control system, connecons can be made to the RS-232
port, Ethernet port, USB, and/or Proximity Sensor port..
Power. Connect the DC power supply to the locaon, “24VDC”, and the other end to your
110V/VAC power socket. The system LED will illuminate above “24VDC” locaon.
Connect Sources Devices Here
IR (Infra-Red) Sensor
Source Selector
Stereo Audio Output
Display Output USB Firmware Update
Proximity Sensor Port
Power & Indicator
RS-232 Port
Ethernet Port

Page 8 SP Controls, Inc.
Installation
Connecting Input DevicesConnecting Input Devices
Input or source devices are connected on the back side of the SW5200 using the connectors
labeled “Input 1” through “Input 5”. See image call-out on Page 7 of this manual.
Compable Input DevicesCompable Input Devices
SW5200 is compable with HDMI, VGA, and USB Type C devices. Use the appropriate connector
which matches your device connector type.
The SW5200 also supports indirect connecons. Oen, the SW5200 itself will be connected
under the table and hidden from view.
HDMI ExtendersHDMI Extenders
The input may also be indirectly connected using an HDMI extender. By default, the SW5200
keeps its display informaon (EDID) local to each input. There is very lile delay from the me
an input device asks for the display informaon to the me the informaon is sent. A device
connected to an extender may “me-out” waing for a response from the display device. If a
me-out occurs, the input device will not send its content. It is important to use high quality
extenders so any delay caused by the extender technology is minimized and me-outs are less
likely to occur.
The SW5200 has a “pass through” mode that passes all display informaon requests directly to
the display. If this feature is enabled and the system is congured with extenders on the input
and output ports of the SW5200 it is possible to have me-outs on certain input devices.

Page 9SP-SW5200-VUHBT Users Guide
Connecting the DisplayConnecting the Display
Displays (or other output devices) are connected on back side of the SW5200 on the HDMI
connector labeled “HDMI Output” and or “HDBaseT Output”. See image call-out on Page 7 of
this manual.
Compable DisplaysCompable Displays
SW5200 is compable with nave HDMI or DVI displays. Displays with DisplayPort connectors
may also operate properly with a HDMI to DisplayPort cable but the display itself must provide
the conversion from HDMI to Displayport (and many do automacally).
Image ResoluonsImage Resoluons
The SW5200 supports resoluons up to UHDTV (3840 x 2160 @ 30Hz [4:2:2] or 60Hz [4:2:0]), all
HDTV resoluons, and VESA monitor resoluons up to 1920 x 1200. The key determining factor
is the clock rate. The SW5200 supports clock rates up to 297MHz.
Stereo Audio OutputStereo Audio Output
If external speakers are required, connect an RCA cable from the SW5200 “Stereo Out”
connectors to your amplier or powered speakers. See image call-out on Page 7, “Stereo Out”.
The stereo output is the audio extracted from the selected input.
Volume ControlVolume Control
Gain levels of the SW5200 stereo output can be adjusted using the IR controller, RS232, USB,
or Ethernet controller. Adjustments can also be made via USB using Presentaon Switchers’
applicaon called Switcher Sengs.
See Basic Operaons, “Volume Control”, for details.
RS-232 Communication InterfaceRS-232 Communication Interface
The SW5200 uses an RS-232 serial interface to change aributes and behavior of the SW5200.
The communicaon parameters are as follows: 115200 baud, 8 bit, no parity, and 1 stop bit. The
baud rate is adjustable. Pins 2 (Rx), 3 (Tx), and 5 (GND) are used. In some instances, the SW5200
may have 24VDC power Pin 9.

Page 10 SP Controls, Inc.
RS-232 Port PinoutRS-232 Port Pinout
Computer PS220
Pin 2 Pin 2
Pin 3 Pin 3
Pin 5 Pin 5
Not Used Pin 9 (24VDC Power)
RS-232 Communication SettingsRS-232 Communication Settings
Baud Rate 115,200 adjustable
Packet Size 8 Bit
Parity None
Stop Bit 1
See Page 10 for more detailed discussions on RS-232 commands and/or review the
SW5200 Programming Guide.
PowerPower
Using the AC to DC power supply shipped with the SW5200, connect the round connector to the
SW5200. The Power Indicator LED will illuminate above of the 24VDC locaon to indicate that
power is being received.
Internal SettingsInternal Settings
In most cases, the default sengs of the SW5200 are sucient for most applicaons. However,
there are mes when changes are needed. In these situaons, PS has created a Windows-based
applicaon which helps users and integrators make these changes. This applicaon is called
“PS Switcher Sengs” and can be downloaded from the SW5200 webpage of the PS website.
Further explanaon is provided later in this document for this applicaon in the Switcher
Sengs secon.
Here are some sengs that can be viewed or changed:
• EDID table and resoluons
• Ethernet sengs
• Volume adjustments
• Auto-switching On/O
• Display inacvity shutdown meout
• Proximity sensor On/O
Autres manuels pour SP-SW5200-VUHBT
1
Table des matières
Autres manuels SP Controls Changer






















