SP Controls SP-SW5100-VUHD Manuel utilisateur

Users Guide
SP-SW5100-VUHD
UPDATED: April, 2020 • PN: DOC-000032-01a

Page 2 SP Controls, Inc.
Contents
Contents��������������������������������������������������������������������������������������������2
Introduction���������������������������������������������������������������������������������������6
Introducing the SP-SW5100-VUHD, a Multiformat HDMI, VGA, and USB-C
Auto-Switching Presentation Switcher���������������������������������������������������������� 4
Getting to Know the SP-SW5100-VUHD �������������������������������������������������������� 5
Front View������������������������������������������������������������������������������������������������������� 5
Back View ������������������������������������������������������������������������������������������������������� 5
Connections ����������������������������������������������������������������������������������������������������� 5
Installation ��������������������������������������������������������������������������������������6
Connecting Input Devices������������������������������������������������������������������������������� 6
Compatible Input Devices������������������������������������������������������������������������������� 6
HDMI Extenders���������������������������������������������������������������������������������������������� 6
Connecting the Display����������������������������������������������������������������������������������� 7
Compatible Displays ��������������������������������������������������������������������������������������� 7
Image Resolutions ������������������������������������������������������������������������������������������ 7
Stereo Audio Output���������������������������������������������������������������������������������������� 7
Volume Control������������������������������������������������������������������������������������������������ 7
RS-232 Communication Interface ������������������������������������������������������������������ 7
RS-232 Port Pinout����������������������������������������������������������������������������������������� 8
RS-232 Communication Settings�������������������������������������������������������������������� 8
Power ���������������������������������������������������������������������������������������������������������������� 8
Internal Settings����������������������������������������������������������������������������������������������� 8
Basic Operation��������������������������������������������������������������������������������9
Selecting a New Source Device to Display ��������������������������������������������������� 9
Selecting a New Source Device to Display
(Using IR Remote)�������������������������������������������������������������������������������������������� 9
How Auto-Switching Works �������������������������������������������������������������������������� 10
Connecting to the Switcher ��������������������������������������������������������������������������� 10
Disconnecting from the Switcher������������������������������������������������������������������� 10
USB Type C Device Connection ������������������������������������������������������������������� 10
Connecting to the Switcher using USB Type C (USB-C) ������������������������������ 10
Quick-Charging Power���������������������������������������������������������������������������������� 10
Volume Control ���������������������������������������������������������������������������������������������� 11
Volume Control using IR Remote Controller ��������������������������������������������������11
Volume Control using Switcher Settings Application��������������������������������������11

Page 3SP-SW5100-VUHD Users Guide
Contents (continued)
Switcher Settings App �������������������������������������������������������������������12
Introduction���������������������������������������������������������������������������������������������������� 12
Windows Mode View (default) ��������������������������������������������������������������������� 12
Real Time Status Section������������������������������������������������������������������������������ 13
Terminal Mode View��������������������������������������������������������������������������������������� 13
Select Input (device to appear on the display) ������������������������������������������� 14
Turn Display On / O ������������������������������������������������������������������������������������� 14
Change Image Resolution����������������������������������������������������������������������������� 14
Volume Level�������������������������������������������������������������������������������������������������� 14
Mute Audio ����������������������������������������������������������������������������������������������������� 15
Display Control ���������������������������������������������������������������������������������������������� 15
Non-Use Timeout ������������������������������������������������������������������������������������������� 15
Proximity Control������������������������������������������������������������������������������������������� 15
LAN Settings �������������������������������������������������������������������������������������������������� 16
Debug Mode ��������������������������������������������������������������������������������������������������� 16
Reset ��������������������������������������������������������������������������������������������������������������� 16
Restore System to Factory Defaults ������������������������������������������������������������ 17

Page 4 SP Controls, Inc.
Introducing the SP-SW5100-VUHD, a MultiformatIntroducing the SP-SW5100-VUHD, a Multiformat
HDMI, VGA, and USB-C Auto-Switching SwitchHDMI, VGA, and USB-C Auto-Switching Switch
Congratulaons and thank you for purchasing this SP Controls’ SP-SW5100-VUHD!
The SP-SW5100-VUHD is a hybrid AV + IoT presentaon switcher which combines the power of
SP Controls audio-visual signal roung and display control.
In its simplest form, the SP-SW5100-VUHD is a mul-format presentaon switcher that allows
up to 3 HDMI, 1 VGA, and 1 USB Type C (USB-C) devices to all share a single HDMI display. Audio
and video content from connected VGA and USB devices will be converted to HDMI so the dis-
play will only have one connecon to the switcher. Any audio associated with the selected input
devices will be extracted and sent to the RCA connectors as a pre-amp for local sound reinforce-
ment. Stereo audio desined for the display will connue to the display unempeded.
The SP-SW5100-VUHD is an electronic device that allows up to 3 HDMI, 1 VGA, and 1 USB Type
C “source” devices, such as a laptop computer and Sony® BluRay™ player, to share user-supplied
content on a single HDMI display, such as a high resoluon LCD display panel or a LED projector
(e.g. “output”). Where audio is included in the video data stream (like HDMI, DisplayPort, USB-
C, etc.) stereo audio from the selected device is extracted and output on two (2) RCA connectors
(le/right) designed for local sound amplicaon. The system auto-switches to a new source
when connected or powered on.
Input port 2 (see call-out on next page) is designed for USB Type C (USB-C) devices, such as a
Google® Chromebook™, Samsung® Galaxy™ phones, Samsung® Galaxy™ Note, Dell® Laptops,
etc. The SP-SW5100-VUHD supplies power (up to 4 dierent voltage levels) to these devices in
accordance with USBPD 2.0 handshaking for the fastest charging capabilies available up to the
power available to the SP-SW5100-VUHD.
Users have numerous opons to control the SP-SW5100-VUHD. By default, the SP-SW5100-
VUHD will automacally switch to any newly connected device. Users can manually select the
device by touching the Input Select buon. External control systems, like those manufactured
by SP Controls, can ulize (a) the RS232 port, (b) the Ethernet port, (c) the IR port, and/or (d)
the USB 2.0 (USB-CDC) port.
Introduction

Page 5SP-SW5100-VUHD Users Guide
Getting to Know the SP-SW5100-VUHDGetting to Know the SP-SW5100-VUHD
The graphic below points out key aributes of the SP-SW5100-VUHD.
Front View Front View
Back View Back View
ConnectionsConnections
Device Inputs and Display Outputs. Using the graphic above, connect the source devices to
the ports labeled above as, “Connect Source Devices Here”, and the display at locaon, “Display
Output”, port. Connect audio, if applicable.
Amplier or Powered Speaker Output Connecons. Connect powered speakers or amplier to
the Red and White RCA connectors denoted above as “Stereo Audio Output”.
Control Ports. Depending upon your control system, connecons can be made to the RS-232
port, Ethernet port, USB, and/or Proximity Sensor port..
Power. Connect the DC power supply to the locaon, “24VDC”, and the other end to your
110V/VAC power socket. The system LED will illuminate above “24VDC” locaon.
Connect Sources Devices Here
IR (Infra-Red) Sensor
Source Selector
Stereo Audio Output
Display Output USB Firmware Update
Proximity Sensor Port
Power & Indicator
RS-232 Port
Ethernet Port

Page 6 SP Controls, Inc.
Installation
Connecting Input DevicesConnecting Input Devices
Input or source devices are connected on the back side of the SP-SW5100-VUHD using the
connectors labeled “Input 1” through “Input 5”.
Compable Input DevicesCompable Input Devices
SP-SW5100-VUHD is compable with HDMI, VGA, and USB Type C devices. Use the appropriate
connector which matches your device connector type.
The SP-SW5100-VUHD also supports indirect connecons.
Oen, the SP-SW5100-VUHD itself will be connected under the table and hidden from view.
HDMI ExtendersHDMI Extenders
The input may also be indirectly connected using an HDMI extender. By default, the SP-SW5100-
VUHD keeps its display informaon (EDID) local to each input. There is very lile delay from
the me an input device asks for the display informaon to the me the informaon is sent. A
device connected to an extender may “me-out” waing for a response from the display device.
If a me-out occurs, the input device will not send its content. It is important to use high quality
extenders so any delay caused by the extender technology is minimized and me-outs are less
likely to occur.
The SP-SW5100-VUHD has a “pass through” mode that passes all display informaon requests
directly to the display. If this feature is enabled and the system is congured with extenders on
the input and output ports of the SP-SW5100-VUHD it is possible to have me-outs on certain
input devices.

Page 7SP-SW5100-VUHD Users Guide
Connecting the DisplayConnecting the Display
Displays (or other output devices) are connected on front side of the SP-SW5100-VUHD on the
HDMI connector labeled “HDMI Output”.
Compable DisplaysCompable Displays
SP-SW5100-VUHD is compable with nave HDMI or DVI displays. Displays with DisplayPort
connectors may also operate properly with a HDMI to DisplayPort cable but the display itself
must provide the conversion from HDMI to Displayport (and many do automacally).
Image ResoluonsImage Resoluons
The SP-SW5100-VUHD supports resoluons up to UHDTV (3840 x 2160 @ 30Hz [4:2:2] or
60Hz [4:2:0]), all HDTV resoluons, and VESA monitor resoluons up to 1920 x 1200. The key
determining factor is the clock rate. The SP-SW5100-VUHD supports clock rates up to 297MHz.
Stereo Audio OutputStereo Audio Output
If external speakers are required, connect an RCA cable from the SP-SW5100-VUHD “Stereo
Out” connectors to your amplier or powered speakers.
The stereo output is the audio extracted from the selected input.
Volume ControlVolume Control
Gain levels of the SP-SW5100-VUHD stereo output can be adjusted using the IR controller,
RS232, USB, or Ethernet controller. Adjustments can also be made via USB using Presentaon
Switchers’ applicaon called Switcher Sengs.
See Basic Operaons, “Volume Control”, for details.
RS-232 Communication InterfaceRS-232 Communication Interface
The SP-SW5100-VUHD uses an RS-232 serial interface to change aributes and behavior of the
SP-SW5100-VUHD. The communicaon parameters are as follows: 115200 baud, 8 bit, no parity,
and 1 stop bit. The baud rate is xed but can be changed using in the Switcher Sengs soware.
Pins 2 (Rx), 3 (Tx), and 5 (GND) are used. In some instances, the SP-SW5100-VUHD may have
24VDC power Pin 9.
235
235
COMPUTER SWITCHER
STRAIGHT THROUGH
SERIAL CABLE

Page 8 SP Controls, Inc.
RS-232 Port PinoutRS-232 Port Pinout
Computer SP-SW5100-VUHD
Pin 2 Pin 2
Pin 3 Pin 3
Pin 5 Pin 5
Not Used Pin 9 (24VDC Power)
RS-232 Communication SettingsRS-232 Communication Settings
Baud Rate 115,200 adjustable
Packet Size 8 Bit
Parity None
Stop Bit 1
See Page 10 for more detailed discussions on RS-232 commands and/or review the
SP-SW5100-VUHD P
rogrammers Guide.
PowerPower
Using the AC to DC power supply shipped with the SP-SW5100-VUHD, connect the round
connector to the SP-SW5100-VUHD. The Power Indicator LED will illuminate above of the 24VDC
locaon to indicate that power is being received.
Internal SettingsInternal Settings
In most cases, the default sengs of the SP-SW5100-VUHD are sucient for most applicaons.
However, there are mes when changes are needed. Please contact Tech Support for addional
informaon. Further explanaon is provided later in this document for this applicaon in the
Switcher Sengs secon.
Here are some sengs that can be viewed or changed:
• EDID table and resoluons
• Ethernet sengs
• Volume adjustments
• Auto-switching On/O
• Display inacvity shutdown meout
• Proximity sensor On/O
• Change Baud rates

Page 9SP-SW5100-VUHD Users Guide
Basic Operation
Selecting a New Source Device to DisplaySelecting a New Source Device to Display
To display a new source, press the Source Selector buon on the Front of the SP-SW5100-VUHD
repeatedly unl the LED on the Acve Source Indicator corresponds to the desired Source Port
Selecon. That image should now be visible on the Display Output and can be heard on the
Stereo Audio Output connectors.
Note: Selecng an input for a source that is not physcially connected will cause the output
display to indicate that the signal has been lost or disconnected.
Selecting a New Source Device to DisplaySelecting a New Source Device to Display
(Using IR Remote)(Using IR Remote)
From the IR Remote controller, shown below, select the Right or Le buons unl the desired
Source is selected. If the front panel is viewable, you will see the Acve Source Indicator change
when each buon is pressed.
Connected Source Indicator

Page 10 SP Controls, Inc.
How Auto-Switching WorksHow Auto-Switching Works
The SP-SW5100-VUHD uses a similar Auto-Sense, Auto-Switching strategy employed in many of
SP Controls & Presentaon Switcher’s products.
Connecng to the SwitcherConnecng to the Switcher
The basic concept is that when someone connects their laptop or other device to the switcher,
the switcher recognizes the connecon, negotates the best resoluon for the display, and dis-
plays the laptop’s image on the display. If the display control feature is enabled and the display
supports CEC, the display will also turn on.
Disconnecng from the SwitcherDisconnecng from the Switcher
When the user disconnects their laptop from the switcher the switcher begins a process to try
to nd and display a dierent acve source. It begins by searching for acve sources beginning
at Input 1 and connuing through Input 5. Once it nds an acve input signal it routes that input
to the display. The hunt always begins at Input 1 and looks at each subsequent input aer.
USB Type C Device ConnectionUSB Type C Device Connection
Many of today’s laptops and mobile devices now oer USB Type C ports. Many of these devices,
such as a Google Chromebook, support video out using this port. Simultaneously, the USB Type
C port will accept power, if available, to charge the laptop or mobile devices.
Connecng to the Switcher using USB Type C (USB-C)Connecng to the Switcher using USB Type C (USB-C)
Connecng a laptop or mobile device using the USB-C port is no dierent than connecng a
BluRay player or some other device using an HDMI port. If Auto-Switching is enabled, the image
from that laptop or mobile device will appear on the screen.
The SP-SW5100-VUHD supports USB-C Alternave “DisplayPort” mode. Thus, navely, the
USB-C device is sending the SP-SW5100-VUHD a DisplayPort video stream that the SP-
SW5100-VUHD converts to HDMI for the local display. It does this automacally.
Quick-Charging PowerQuick-Charging Power
Devices connected to the SP-SW5100-VUHD’s USB-C port automacally get charged when con-
nected using the fastest method available for each device. The SP-SW5100-VUHDprovides 5V,
9V, 15V, and 20V levels depending upon the capabilies of the USB-C device connected. This
negotaon process allows dierent devices to be charged at the opmal voltage and speed as
requested by the device itself. The SP-SW5100-VUHD is limited to 30W of power which may
limit the ability from some larger laptops to accept power from the SP-SW5100-VUHD.
Autres manuels pour SP-SW5100-VUHD
1
Table des matières
Autres manuels SP Controls Changer






















