SOYO SY-6BA+ Manuel utilisateur

SY-6BA+

Mainboard

Quick Start Guide

CTested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

POST CONSUMER

RECYCLED PAPER

100%

Hardware

Installation

Quick BIOS

Setup

Introduction

The SOYO CD

SOYO™

SY-6BA+ Mainboard

Pentium

II processor & Celeron

processors

82440 BX AGP/PCI Mainboard

66&100MHz Front Side Bus supported

ATX Form Factor

Trademarks:

Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their

owners.

Product Rights:

Product and corporate names mentioned in this publication are used for identification purposes

only and may be registered trademarks or copyrights of their respective companies.

transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by

any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of

this publication without express written permission of Soyo Computer Inc.

Disclaimer:

Soyo Computer Inc. makes no representations or warranties regarding the contents of this

manual. We reserve the right to revise the manual or make changes in the specifications of the

product described within it at any time without notice and without obligation to notify any

person of such revision or change. The information contained in this manual is provided for

general use by our customers. Our customers should be aware that the personal computer field is

the subject of many patents. Our customers should ensure that their use of our products does not

infringe upon any patents. It is the policy of Soyo Computer Inc. to respect the valid patent rights

of third parties and not to infringe upon or assist others to infringe upon such rights.

Restricted Rights Legend:

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

252.277-7013.

About This Guide:

This Quick Start Guide is for assisting system manufacturers and end users in setting up and

installing the mainboard. Information in this guide has been carefully checked for reliability;

however, no guarantee is given as to the correctness of the contents. The information in this

document is subject to change without notice.

If you need any further information, please visit our Web Site on the Internet. The address is

"http://www.soyo.com.tw".

6BA+ Serial - Version 1.1 - Edition: September 1998

*Thesespecificationsaresubjecttochangewithoutnotice

SY-6BA+

Quick Start Guide

Introduction

Congratulationsonyourpurchaseofthe

SY-6BA+

Mainboard.ThisQuickStartGuide

describesthestepsforinstallingandsettingupyournewmainboard.

Thisguideisdesignedforalluserstoprovidethebasicstepsofmainboardsettingand

operation.Forfurtherinformation, pleasereferto SY-6BA+MainboardUser'sGuideand

TechnicalReferenceonlinemanualincludedontheCD-ROMpackedwithyourmainboard.

Unpacking

*Ifyourboardcomeswithadriverdiscandapapermanual,theQuickStartGuideandtheCD-ROMarenotincludedinthepackage.

Whenunpackingthemainboard,checkforthefollowingitems:

TheSY-6BA+82440BXAGP/PCI Mainboard

ThisQuickStartGuide

TheInstallation CD-ROM

TheCPURetentionSet

OneIDEDeviceFlat Cable

OneFloppyDiskDriveFlatCable

SY-6BA+ Quick Start Guide

Introduction

SY-6BA+ Mainboard Layout

Key Features

SupportsIntelPentium

IIprocessor

(233-550MHz)&Celeron

processors(266-366MHz)

Auto-detectCPUvoltage

PC97,ACPI,UltraDMA/33MHz

Power-onbymodemoralarm

SOYOCOMBOSetup

SupportsWake-On-LAN(WOL)

Supportsonboardhardwaremonitoring

andincludes Hardware Doctor™utility

SupportsCreativeSB-LINK™for PCI

audiocard

1x32-bitAGPslot

5x32-bitbusmasteringPCIslots

2xUSBportsonboard

1xIrDAport

Supportsmultiple-bootfunction

DMIutility

COM 1

COM 2

PRT

USB 1

USB 2

PS/2 KB

Connector

PS/2 Mouse

Connector

JP10

PCI Slot #1

PCI Slot #2

PCI Slot #3

PCI Slot #4

PCI Slot #5 (Slave)

ISA Slot #1

ISA Slot #2

JP5

3V Lithium

Battery

JP44

1 3

Intel®

82371 EB

SB-LINK™

Intel

82443 BX

IR1

CPUFAN

Ultra

I/O Chipset

Flash BIOS

CHAFAN

IDE 1IDE 2

FDC

Slot 1 for

Pentium®

II Processor

1 3

AGP Slot

ATX

Power

DIMM 1

DIMM 2

DIMM 3

DIMM 4

Speaker

Keylock

Power

LED Reset

PWRBT

Turbo

LED

HDD LED

WOL

Header

CMOS Clear

Jumper

Power-On by Keyboard

Jumper

SY-6BA+

Quick Start Guide

Hardware

Installation

Toavoiddamagetoyourmainboard,followthesesimpleruleswhile

handlingthisequipment:

Beforehandlingthemainboard,groundyourselfbygraspinganunpaintedportionof

thesystem'smetalchassis.

Removethemainboardfromitsanti-staticpackaging.Holditbytheedgesandavoid

touchingitscomponents.

Checkthemainboardfordamage.Ifanychipappearsloose,presscarefullytoseatit

firmlyinitssocket.

Followthedirectionsinthissectiondesignedtoguideyouthroughaquickandcorrect

installationofyournew

SY-6BA+

Mainboard.Fordetailedinformation,pleasereferto SY-

6BA+Mainboard User'sguide andTechnical Reference onlinemanualincludedontheCD-

ROMpackedwithyour mainboard.

PREPARATIONS

Gatherandprepareallthenecessaryhardwareequipmenttocompletetheinstallation

successfully:

Pentium

processorwithbuilt-inCPUcoolingfan(boxedtype)

SDRAMmodule

Computercaseandchassiswithadequatepowersupplyunit

Monitor

PS/2Keyboard

PointingDevice(PS/2mouse)

VGACard

SoundCard(optional)

Speaker(s)(optional)

DiskDrives:HDD,CD-ROM,Floppydrive…

ExternalPeripherals:Printer,Plotter,andModem-(optional)

InternalPeripherals:ModemandLANcards(optional)

SY-6BA+ Quick Start Guide

Hardware

Installation

Install the Mainboard

Followthestepsbelowinordertoperformtheinstallationofyournew

SY-6BA+

Mainboard.

Step 1. Install the CPU

Mark your CPU Frequency:

RecordtheworkingfrequencyofyourCPU

thatshouldbeclearlymarkedontheCPUcover.

233MHz(66 x3.5) 300MHz(66 x4.5) 350MHz (100 x 3.5) 450MHz (100x 4.5)

266MHz(66 x4.0) 333MHz(66 x5.0) 400MHz (100 x 4.0) 500MHz (100x 5.0)

550MHz(100 x5.5)

CPU Mount Procedure:

TomountthePentium

IIprocessorthatyouhave

purchasedseparately,followthese instructions.

Unpack the Retention Kit 2

Position the Mainboard 3

Insert the Screws

Install the Supporting Base

Install the Retention Clip 6

Install the CPU

Install the Support Clip 8

Insert the Latches 9

Remember to connect the CPU

Cooling Fan to the CPUFAN

power connector on the

mainboard.

Supporting Base

Support Clip

Screws (x2)

Retention Clip

Latches (x2)

ATX Power

Heat Sink

Slot 1

CPUFAN Power Larger Pinhole

SY-6BA+

Quick Start Guide

Hardware

Installation

Step 2. Make Connections to the Mainboard

Thissectiontellshowtoconnectinternalperipheralsandpowersupplytothemainboard.

InternalperipheralsincludeIDEdevices(HDD,CD-ROM),FloppyDiskDrive,Chassis Fan,

FrontPanelDevices(TurboLED,InternalSpeaker,ResetButton,IDELED,and KeyLock

Switch.),Wake-On-LANcard,VGAcard,SoundCard,andotherdevices.

FormoredetailsonhowtoconnectinternalandexternalperipheralstoyournewSY-6BA+

Mainboard,pleasereferto SY-6BA+Mainboard User'sGuide andTechnical Reference

onlinemanualonCD-ROM.

Connectors and Plug-ins

PCI Audio Card Header: SB-Link™Wake-On-LAN Header: JP44

Connect the SB-Link™cable from your

creative sound blaster PCI audio card to

this header.

Connect the WOL cable from your LAN

card to JP44.

CPU Cooling Fan: CPUFAN Chassis Fan: CHAFAN

Connect the CPU cooling fan cable to the

CPUFAN power connector. Connect the case cooling fan cable to the

CHAFAN power connector.

USB TB LED SPK

Plug your USB devices

to this connector.

Connect your Turbo LED

cable to this header.

Connect the speaker cable to

this header.

RESET IDE LED KB-LOCK

Connect the reset button

to this heder.

Connect the IDE device

LED to this header.

Connect the Power LED and the

KB Lock switch to this header.

rDA (Infrared Device Header): IR1

Connect the cable from your IrDA device to this header.

IATX Power On/Off: PWRBT ATX Power Supply: ATX PW

Connect your power switch to this

header (momentary switch type).

To turn off the system, please press

this switch and hold down for

longer than 4 seconds.

Attach the ATX Power cable to this connector

When using the Keyboard Wake-Up function,

please make sure the ATX power supply can

take at least 720mA load on the 5V Standby

lead (5VSB) to meet the standard ATX

specifications.

SY-6BA+ Quick Start Guide

Hardware

Installation

Step 3. Configure Memory

YourboardcomeswithfourDIMMsockets,providingsupportforupto1GBofmainmemory

usingDIMMmodulesfrom8MBto256MB.For66MHzfrontsidebusCPUsuse12nsor

fastermemory;for100MHzfrontsidebusCPUsuse8ns(100MHz,PC100compliant)

memory.

Memory Configuration Table

Number of

Memory Modules DIMM 1 DIMM 2 DIMM 3 DIMM 4

11st

21st 2nd

31st 2nd 3rd

41st 2nd 3rd 4th

RAM Type SDRAM

Memory Module

Size (MB) 8/16/32/64/128/256 Mbytes

Note:(1) 256 MB memory modules only available on PC registered DIMM.

(2) Always install memory modules in the order prescribed in this table.

(3) Do not install unbuffered and registered memory modules together.

Important:

ItisofprimeimportancethatyouinstallDIMMmodulesasoutlinedinthetable

aboveinordertopreservesignalintegrityon100MHzfrontsidebussystems.

Step 4. Enable/Disable Power-On by Keyboard (JP10)

YoucanchoosetoenablethePower-OnbyKeyboardfunctionbyshortingpin1-2onjumper

JP10,otherwise,shortpin2-3todisablethisfunction.

Power-On by

Keyboard Enable Disable

JP10 Setting Short pin 1-2 to enable the

Power-On by Keyboard function. Short pin 2-3 to disable the

Power-On by Keyboard function.

Important: When using the Power-On by Keyboard function, please make sure the

ATX power supply can take at least 700mAmp load on the 5V Standby lead (5VSB) to

meet the standard ATX specification.

SY-6BA+

Quick Start Guide

Hardware

Installation

Step 5. Clear CMOS Data (JP5)

CleartheCMOSmemorybymomentarilyshortingpin2-3onjumperJP5foratleast5

seconds,andthenbyshortingpin1-2toretainnewsettings. Thisjumpercanbeeasily

identifiedbyitswhitecoloredcap.

CMOS Clearing Clear CMOS Data Retain CMOS Data

JP5 Setting Short pin 2-3 for

at least 5 seconds

to clear the CMOS.

Short pin 1-2

to retain the

new settings.

Note: You must unplug the ATX power cable from the ATX power connector when

performing the CMOS Clear operation.

TheSY-6BA+providesover-clockingcapability.Duetotheover-clockingsettingyour

systemmayfailtobootuporhangduringruntime.Pleaseperformthefollowing

stepstorecoveryoursystemfromtheabnormal situation:

Turnoffsystempower.

Pressandholddownthe<Insert>keywhileturningonthesystempower.Keepholding

downthe<Insert>keyuntilyouseethemessageoftheCPUtypeandfrequencyshown

onthescreen.

Pressthe<Del>keyduringthesystemdiagnosticcheckstoentertheAwardBIOSSetup

program.

Select[SOYOCOMBOSETUP]andmovethecursortothe[CPUFrequency]fieldtoset

theproperworkingfrequency.

Select[Save&ExitSETUP]andpress<Enter>tosavethenewconfigurationtothe

CMOSmemory,andcontinuethebootsequence.

Note: SOYOdoesnotguaranteesystemstabilityiftheuser over clocks the system.

Anymalfunctionsduetoover-clocking are notcoveredbythewarranty.

SY-6BA+ Quick Start Guide

Quick BIOS

Setup

Quick BIOS Setup

ThismainboarddoesnotuseanyhardwarejumperstosettheCPUfrequency.Instead,

CPUsettingsaresoftwareconfigurablewiththeBIOS

[SOYO COMBO SETUP].

The

[SOYOCOMBOSETUP]menucombinesthemainparametersthatyouneedtoconfigure,

allinonemenu,foraquicksetupinBIOS.

Afterthehardwareinstallationiscomplete,turnthepowerswitchon, thenpress the

<DEL>

key

duringthesystemdiagnostic checksto entertheAwardBIOSSetupprogram.The CMOS

SETUPUTILITYwilldisplayonscreen.Then,followthesestepsto configurethe CPUsettings.

Step 1. Select [STANDARD CMOS SETUP]

Set[Date/Time]and[Floppydrivetype],thenset [HardDiskType]to “Auto”.

Step 2. Select [LOAD SETUP DEFAULT]

Selectthe“LOADSETUPDEFAULT”menuandtype“Y”attheprompttoloadtheBIOS

optimalsetup.

Step 3. Select [SOYO COMBO SETUP]

Movethecursortothe

[CPUFrequency]

fieldtosettheCPUfrequency.

Available[CPUFrequency]settingsonyourSY-6BA+Mainboardaredetailedinthe

followingtable.Ifyousetthisfieldto[Manual],youarethenrequiredtofillinthenexttwo

consecutivefields:(1)theCPUHost/PCIClock,and(2)theCPURatio.

CPU Frequency

233MHz (66 x 3.5) 400MHz (100 x 4.0)

266MHz (66 x 4.0) 450MHz (100 x 4.5)

300MHz (66 x 4.5) 500MHz (100 x 5.0)

333MHz (66 x 5.0) 550MHz (100 x 5.5)

350MHz (100 x 3.5)

Select the working frequency of

your Pentium®

II processor among

these preset values.

Note: Mark the checkbox that

corresponds to the working

frequency of your Pentium®

processor in case the CMOS

configuration should be lost.

Note:

ifyouuseBusFrequenciesof75MHz,makesurethatyourPCIcardscancopewith

thehigherPCIclock.

Step 4. Select [SAVE & EXIT SETUP]

Press

<Enter>

tosavethenewconfigurationtotheCMOSmemory,andcontinuetheboot

sequence.

Autres manuels pour SY-6BA+

Table des matières

Autres manuels SOYO Carte mère

SOYO

SOYO SY-P4I845GEISA Manuel utilisateur

SOYO

SOYO SY-6IBM Manuel d'utilisation et d'entretien

SOYO

SOYO DRAGON 2 Motherboard 2 Manuel utilisateur

SOYO

SOYO SY-KT600 DRAGON Plus Manuel utilisateur

SOYO

SOYO Pentium SiS 551x Manuel d'utilisation et d'entretien

SOYO

SOYO SY-7IWA-F Manuel utilisateur

SOYO

SOYO SY-7IZM Manuel utilisateur

SOYO

SOYO DRAGON Lite SY-KT333 Manuel utilisateur

SOYO

SOYO 5EAS5 Manuel d'utilisation et d'entretien

SOYO

SOYO TechAID Manuel utilisateur

SOYO

SOYO SY-6KE Manuel utilisateur

SOYO

SOYO SY-5EH5 Manuel d'utilisation et d'entretien

SOYO

SOYO SY-K7VTA PRO Manuel utilisateur

SOYO

SOYO SY-5EMA Pro Super 7 Manuel d'utilisation et d'entretien

SOYO

SOYO Super 7 SY-5SSM Manuel d'utilisation et d'entretien

SOYO

SOYO SC-6TFx Manuel utilisateur

SOYO

SOYO 82440 FX Manuel d'utilisation et d'entretien

SOYO

SOYO SY-KT880 DRAGON 2 Manuel utilisateur

SOYO

SOYO Mainboard SY-5S Manuel utilisateur

SOYO

SOYO SY-7VEM Manuel utilisateur

SOYO

SOYO SY-7IWM/L V1.0 Manuel utilisateur

SOYO

SOYO 5ehm Manuel utilisateur

SOYO

SOYO SY-P4RS300 Manuel utilisateur

SOYO

SOYO SY-7IZB+N Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur