Soundstream SDR-342B Manuel utilisateur

SDR-342B

SDR-342BT

Flip-down/Detachable 3.4" Monitor

MP3/MP4 Player

AM/FMRadio

Built-in TV

tuner

(only for SDR-342T model)

Owner's Manual

Take the time

read

through

this

owner's manual.

Familiarity

with

installation and operation procedures will help you obtain the best

Performance from

your

new device.

• Using the device at temperature below

-1

OOC

may cause the breakage

the device.

BEFORE USING PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE

RECOMMENDED TEMPERATURE!

• Read carefully through this manual to familiarize you with this high-quality sound system.

• Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

• When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse

with a higher amperage·

rating may cause serious damage to the unit.

• Make sure that pins or other foreign objects do not get inside the unit; they may cause

malfunctions, or create safety hazards such as electrical shock or laser beam exposure.

• Ifyou have parked the car for a long time

hot or cold weather, wait until the temperature

the car becomes normal before operating the unit.

• DO NOT open covers and do not repair yourself. Consult the dealer or an experienced

technician for help.

• Make sure you disconnect the power supply and aerial ifyou will not use the system for a long

period or during a thunderstorm.

• Make sure you disconnect the power supply ifthe system appears to be working incorrectly,

(For example: making unusual sounds, smelling strange, emitting smokes from inside or

liquid having gotten inside

it)

Have a qualified technician check the system.

• The unit is designed for negative terminal

the battery, which is connected to the vehicle

metal. Please confirm it before installation.

• Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise

it may overload or burn out the power amplifier.

• Do not install the detachable panel before connecting the wire.

• Don't remove the detachable panel when encoding.

Important Safeguards...............................................................................................................2

Contents...................................................................................................................................3

Accessories..............................................................................................................................4

lnstallation/Un-lnstallation ........................................................................................................5

Wiring Connections..................................................................................................................6

Front panel...............................................................................................................................7

Inner panel ...............................................................................................................................7

Remote control.........................................................................................................................8

Remove battery........................................................................................................................8

Main Menu ...............................................................................................................................9

General Operation ...................................................................................................................9

Radio operation......................................................................................................................12

USB/SD/MMC Operation .......................................................................................................13

Bluetooth Section...................................................................................................................14

TV Section (only for SDR-342BT model) ...............................................................................15

Anti-theft system ....................................................................................................................17

Troubleshooting guide ...........................................................................................................17

Specification...........................................................................................................................18

Package contains the following accessories for installation and operation

the unit.

(1) Washer, Spring

Washer, M5 Nut

(2) Mounting Strap

(3) Bolt

(4) Screw

(5) Mounting Collar

(6) Release Key

(7) Screw

(8) Rubber Cushion

·-·

------·------

--·---··-

·-

-·---·-

Remote Control

User

Manual

each

p o o

c:::>

o o

Warranty card ISO cable

User Manual 1x front panel protection case Trim ring

Noted:

Product image may vary from the actual delivery

external microphone

cable

First complete the electrical connections, and then check them for correctness.

Installation

This unit can be installed

any

dashboard having an opening as

shown on the picture. The

dashboard should be

75 -5.56

mm thick

order to be able to

support the unit.

Insert mounting collar into the

dashboard, and bend the

mounting tabs out with a

screwdriver.

Make sure that lock lever C

flush with the mounting collar (not

projecting outward).

Secure the rear

the unit.

Lock lever ( *)

After fixing mounting bolt and power connector, fix the rear

the unit to the car body by rubber

cushion.

Insert trim plate.

When you prepare to insert trim plate, please check its direction. Once it was up side down, it

cannot be fixed.

Un-installation

Remove Trim Ring and insert Release Keys into left and

right side-end holes as shown

below picture and pull 0

the unit out

the dashboard.

Make sure you have good chassis ground. A good ground connection will eliminate most

electrical noise problems. A good chassis ground requires a tight connection to the vehicle's

metal chassis. The area around the ground connection should be clean, bare metal without rust,

paint, plastic, dust, or dirt for a good electrical connection.

Caution: Do not interchange the connection of the wiring!!!

For some car models you may need to modify wiring

the supplied power cord. Contact your

authorized car dealer before installing this unit.

SeUNDSTREAM

USB/SD,MP3/MP4,AM/FM

STEREO

ISO

Speaker

Connection

FJnWID~

mm~

immrr==n

ect

rking to see vi

deo

+-+-

(GNOJ[B

wn)

rmin

alw

ays supplied

pow

ory B+)(Yell

)

sys

tem

contr

ol t er

nal

the

pow

-an

tenna

contr

ol ter

mmal(

max.

30DmA

12V

DC)(

Blue)

tric

termina

l con

olled

by ign

ion

switch(

DC)

ON/

ACC B+](Red)

ehicl

e (

meta

l)b

ody.(GNO)(Biack)

ont

speaker

t +

ght

Left+

Left

Rear

speaker

ght+

ght

Left+

Left-

Using the ISO Connector

Ifyour car is equipped with the ISO connector, then connect the ISO connectors as illustrated.

For connections without the ISO connectors, check the wiring

the vehicle carefully before

connecting, incorrect connection may cause serious damage to this unit.

Cut the connector; connect the colored leads

the power cord to the car battery as shown

the color code table below for speaker and power cable connections.

Location Function

Connector A Connector B

1 Rear Right(+)---Purple

2 Rear Right(-)---Purple/Black Stripe

Parking (GND)---Brown Front Right(+)---Grey

Battery 12V (+)---Yellow Front Right(-)---Grey/Black Stripe

Auto Antenna---Blue Front Left(+)---White

Front Left(-)---White/Black Stripe

ACC(

+)---Red Rear Left(+)---Green

Ground---Black Rear Left(-)---Green/Black Stripe

6 7 8 9

--t

f-l:!::::i!~

--t---

----.~

Power /Mute button

2) EQ /LOUD button

3) SEL button

4) Mode button

5) SCAN button

6) MENU button

7) Volume/OK button

8) AS/PS button

12 13

BAND

Media select

accept button

Inner panel

L.__j

[ SD ( )0

, B

[

18) SD/MMC card slot

19)

Reset button

) Anti-Theft LED flash

) Play/Pause, Memory /reject button

11) Previous I Reverse button

) Next I Forward button

) IR sensor

) LCD Screen

) OPEN button

) USB slot

17)

AUXIN

jack/AV IN jack(optional)

L.__j

mUm

~(]

0 0

NOTE: When turn

off

the power, the unit will switch to standby mode unless cut the ACC power.

The power light will continue lighting.

~!~~!!~

.................

G)--~~===-::1

---

Remove batte

Note:

1: MENU

2: POWER

3: UP

4: BAND/M.SEURDM

5: ENTER

LEFT/SEEK-/FAST BACKWARD

7: DOWN

8: REPEAT/INT

AS/PS

10:

MODE

11:DIGITNUMBER

12:PLAY/PAUSE/ REJECT

:MUTE

14: AUDIO/ACCEPT

15: SUBTITLE

:RIGHT/SEEK+/FAST FORWARD

17:VOLUME PLUS

18:SET

19: VOLUME MINUS

20: EO/LOUD

:SEL

22: SCALE/ROTATE

23:GO TO

• The distance may vary according to the brightness

ambient light.

•

the remote is not used for an extended period

time, remove the battery to prevent

possible damage from battery leakage and

corrosion.

• Do not place any objects between the remote

control unit and the sensor

the unit.

• Do not dropthe remote control onto the floor;

will damage it beyond repair.

• Do not use the remote control unit, while simultaneously operating the remote control unit

any other equipment; they

may

interfere resulting in improper operation.

• The battery normally last for about one yearalthough depending how often the remote

control is used.

the remote control unit isn't working even when it is operated near the unit,

replace the battery with a new battery

the same make and use only a lithium cell battery

type: CR2025 (3V).

• Dispose empty batteries in accordance with your local governmental regulations.

• Do not short-circuit, disassemble, heat or dispose

fire

flames the battery.

• Keep the battery

out

reach

children, should the battery be swallowed, immediately

consult a doctor.

~!~!~

...................

The best way to discover the program is to explore each screen in detail, and to find out how to

move from one to another. Read this chapter for a guided tour.

Unit starts by displaying the Main menu.

This is the root

the screen hierarchy, you can simply take knowledge

the features.

General Operation

Reset the unit

Operating the unit for the first time

after replacing the car battery, you must reset the unit.

Press OPEN button on the panel to open the panel and press RESET button to restore the unit

to its original factory settings.

Power on

off

Press any button (except open button) to turn on the unit.

Long press POWER button on front panel or press power button on the RC to power offthe unit..

Mode setting

Press the MODE button repeatedly to switch between inputs:

RADIO-USB-SD-TV-AUX

IN/AV

IN-SETTING-RADI~

(*available only

there is media device in

SO,

USB slot connection is OK.)

Volume/OK

Adjust the volume level by turning the VOL knob on the panel clockwise to increase

counterclockwise to decrease or pressing VOL+

VOL- on the RC to increase

decrease the

volume.

any mode, rotate VOL knob to select the file you want to playback, press the OK button to

enter the next menu.

Mp3 mode, when playing the music, press the OK button on the front panel, the music will

start from the beginning.

Photo mode, when playing the photo, press the OK button on the front panel to enterthe

photo setup menu.

Video mode, when playing the video, press the

button on the front panel, you will see

the track number and running time on the screen

Sound Adjustments

Press the SEL button on the

to select the audio settings consisting

following items:

EQ:

Select the digital sound effect

USER-FLAT-CLASSIC-POP-ROCK

BASS: Bass up/down.

TREBLE: Treble up/down.

BALANCE: Left/right Balance control.

FADER: Front/rear Fader control.

LOUDNESS: Set the loudness on

off.

BEEP: Keypad sound setting.

Rotate Volume knob on the front panel

press up/down arrow on the RC to select any items

and then press OK button on the panel

Enter button on the RC to confirm the item.

Rotate Volume knob

press LEFT/RIGHT buttons on the RC to adjust the audio setting. Press

button on the panel

Enter button on the

to confirm and again press SEL button return

to current mode.

Note:

the unit is turned off, all the settings

each mode will be saved.

cutting

off

battery power

resetting the unit, all the settings will return to factory default

settings.

Mute function

Press POWER/MUTE button on the panel or MUTE button on the RC to turn the sound off. Press

it again to resume the volume.

Loudness

Long press EO/LOUD button on the

or front panel to set loudness on

off.

Press the EQ button on the panel to choose sound effect in the sequence

USER-

FLAT-

CLASSIC-POP-ROCK.

Press MENU button on the front panel

the

to return to previous menu.

Setup

Press SET button on the RC

front panel,

SET icon on the main menu to go to setup pages.

1) Rotate Volume knob on the front panel

press up/down arrow on the RC to select any items

and then press OK button on the panel or ENTER button on the RC to confirm the item

2) Rotate Volume knob

press LEFT/RIGHT buttons on the RC to adjust the audio setting.

Press OK button on the panel

Enter button

the RC to confirm.

Press SET button on the RC

front panel again return to current mode.

Sound

SETIINGS

EQ: select the digital sound effect.

j ·

souND

!_!DISPLAY

Bass

Bass: bass up/down.

CJr'

GENERAL

Treble

Treble: treble up/down.

Balance

t·'"l

RADIO

Fader

R Balance: Left/right Balance control.

SYSTEM

Fader: Front/rear Fader control.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Soundstream Récepteur de voiture

Soundstream

Soundstream VIR-7200 Manuel utilisateur

Soundstream

Soundstream VR-701 T Manuel utilisateur

Soundstream

Soundstream VR-345 Manuel utilisateur

Soundstream

Soundstream VRN-DD7HB Manuel utilisateur

Soundstream

Soundstream VIR-8310NRB Manuel utilisateur

Soundstream

Soundstream SDR-342 Manuel utilisateur

Soundstream

Soundstream mobile video system Manuel utilisateur

Soundstream

Soundstream VCD-32B Manuel utilisateur

Soundstream

Soundstream VIR-8000 Manuel utilisateur

Soundstream

Soundstream VCD-30 Manuel utilisateur

Soundstream

Soundstream VR-622HB Manuel utilisateur

Soundstream

Soundstream VR-722HB Manuel utilisateur

Soundstream

Soundstream SDR-656T Manuel utilisateur

Soundstream

Soundstream SDR-762 Manuel utilisateur

Soundstream

Soundstream VR-722HB Manuel utilisateur

Soundstream

Soundstream VDVD-300R Manuel utilisateur

Soundstream

Soundstream VCD-21B Manuel utilisateur

Soundstream

Soundstream VIR-7840 Manuel utilisateur

Soundstream

Soundstream PCD-41B Manuel utilisateur

Soundstream

Soundstream VL-16PMP Manuel utilisateur

Soundstream

Soundstream VR-345B Manuel utilisateur

Soundstream

Soundstream VR-74H2B Manuel utilisateur

Soundstream

Soundstream VR-701B Manuel utilisateur

Soundstream

Soundstream VR-732T Manuel utilisateur

Manuels Récepteur de voiture populaires d'autres marques

Motorola

Motorola VWA63 Manuel utilisateur

Nextar

Nextar D3201 Manuel utilisateur

Alpine

Alpine CDE-163BT Manuel utilisateur

Pioneer

Pioneer DEH-P645R Manuel utilisateur

Axxera

Axxera XDMA7600 Mode d'emploi

XM OnyX Manuel utilisateur

Sound Storm

Sound Storm STM93R Manuel utilisateur

Avson

Avson MKT Platform Manuel utilisateur

Sony

Sony MEX-1HD - Audio Library System Manuel utilisateur

Pioneer

Pioneer DVH-P500UB Manuel utilisateur

JVC

JVC KD-AHD69 Manuel utilisateur

Blaupunkt

Blaupunkt SANTIAGO CR 87 Manuel utilisateur

Sony

Sony CDX-4160 - Cd Receiver Manuel utilisateur

XFIRE AUDIO

XFIRE AUDIO BMW42S Manuel utilisateur

VDO

VDO CD 2253 Manuel utilisateur

Volvo

Volvo 13 84 580 Manuel utilisateur

ZENEC

ZENEC ZE-160DVD Manuel utilisateur

Medion

Medion Car Audio Manuel utilisateur