Sony KV-XA21M60 Manuel utilisateur
© 2000 Sony Corporation
KV-XG29
KV-XG25
KV-XA21
4-080-934-13 (1)
Operating Instructions GB
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
§ŸË¡◊Õ°“√„™Èß“π ‰∑¬
•°ËÕπ‡√‘Ë¡°“√„™Èß“π°√ÿ≥“ÕË“π§ŸË¡◊Õπ’È‚¥¬≈–‡Õ’¬¥∑—ÈßÀ¡¥·≈–‡°Á∫√—°…“§ŸË¡◊Õ «È
”À√—∫ÕÈ“ßÕ‘ß„π‚Õ°“µËÕÊ ª
Trinitron Color TV
‡§√◊ËÕß√—∫‚∑√∑—»πÏ’
Trinitron
M63
M60
P50
2
WARNING
•Dangerously high voltages are present inside the TV.
•Operate the TV only between 220 –240 V AC.
To prevent fire or shock hazard, do not expose
the TV to rain or moisture.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are
present inside the TV. Refer servicing and
disposal of the TV to qualified personnel.
Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may
be subject to excessive dust, heat, moisture or
vibrations.
Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.
For children’s safety, do not leave children alone
with the TV. Do not allow children to climb onto
it.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.
Do not place any objects on the TV.
3
GB
Using Your New TV
Table of Contents
Using Your New TV
Getting Started ............................................................................................. 4
Step 1 : Connect the antenna................................................................. 4
Step 2 : Insert the batteries into the remote ........................................ 5
Step 3 : Preset the channels automatically .......................................... 5
Connecting the 3D WOOFER (KV-XA21M63 only) ............................... 6
Connecting optional components ............................................................. 7
Securing the TV ............................................................................................ 9
Presetting channels .................................................................................... 10
Watching the TV ........................................................................................ 13
Advanced Operations
Customizing the picture and sound ....................................................... 16
Viewing your favorite channels ............................................................... 19
Blocking the channels (CHILD LOCK) .................................................. 20
Enjoying stereo or bilingual programs .................................................. 21
Additional Information
Self-diagnosis function.............................................................................. 23
Troubleshooting ......................................................................................... 24
Overview of controls ................................................................................. 27
Specifications ..............................................................................Back Cover
Pull the power cord out by the plug. Do not pull
the power cord itself. Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.
Install the TV on a stable TV stand and floor
which can support the TV set weight. Ensure that
the TV stand surface is flat and its area is larger
than the bottom area of the TV.
WARNING (continued)
Using Your New TV
4
Using Your New TV
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the Connecting a VCR diagram below.
Using Your New TV
IEC connector
(not supplied)
To video
and audio
outputs
(yellow)
-L (MONO) (white)
-R (red)
Audio/Video cable (not supplied)
Rear of TV
Connecting a VCR
To watch the video input, press t(see page 14).
: Signal flow
: Signal flow
or Antenna cable
(not supplied)
Antenna cable
(not supplied)
(yellow)
-L (MONO) (white)
-R (red)
To video
and audio
outputs Audio/Video cable (not supplied)
To t1 (video input)
To 8(antenna)
To antenna output
: Signal flow
VCR
KV-XA21M63/XA21M60
Antenna cable (not supplied)
To antenna output
VCR
To
t
1 or 2 (video input)
Rear of TV
Rear of TV
L(MONO)R
RL
VIDEO IN
VIDEO OUT
VIDEO
AUDIO
1
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
RL
To 8(antenna)
KV-XG29M60/XG25P50
Using Your New TV 5
Using Your New TV
Step 2
Note
•Do not use old batteries nor use different types of batteries together.
Front of TV
Notes
•If you connect a monaural VCR, connect the yellow plug to (the
yellow jack) and the black plug to -L (MONO) (the white jack).
•If you connect a VCR to the 8(antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
•When no signal is input from the connected video equipment, the TV
screen becomes blue.
KV-XG29M60/XG25P50 only
•Do not connect video equipment to the t2 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
CAUTION
•Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
•To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
Insert the batteries
into the remote
Step 3
Preset the channels automatically
Tips
•If you want to stop automatic channel presetting, press SELECT twice.
•If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 11).
Note (KV-XG29M60/XA21M63/XA21M60 only)
•During automatic channel presetting, your TV screen will indicate
“AUTO”for the TV system.
AUTO
PROGR
1
1
VHF LOW AUTO
1
2
2
L(MONO) R
PROGR
SELECT AUTO
PROGR
!
Using Your New TV
6
Connecting the 3D WOOFER
(KV-XA21M63 only)
You can enjoy high quality sound by connecting the 3D WOOFER.
1Align the front of the 3D WOOFER to corners A and B of your TV. Place the
3D WOOFER into the footholds and adjust it until it is stable.
2Connect the wires to the 3D WOOFER (8Ω) terminals at the rear of your TV.
The red wire should be connected to the 3red terminal and the black wire
to the #black terminal.
Notes
•Connect only the supplied 3D WOOFER; otherwise your TV may
malfunction.
•Unplug your TV from the wall outlet when connecting the 3D WOOFER.
•To prevent a malfunction caused by a short circuit of the terminals, make
sure that none of the 3D WOOFER wire strands stick out, making contact
with the neighbouring 3D WOOFER terminal.
Black
wire
Red
wire
WOOFER (8 )
– +
WOOFER(8 )
– +
3D WOOFER
1
2
Corner A Corner B
Using Your New TV 7
Using Your New TV
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.
To watch the video input of the connected equipment, press t(see page 14).
Connecting a camcorder/video game equipment
using the t(video input) jacks
Notes
KV-XA21M63/XA21M60 only
•You can also connect video equipment to the t1 (video input) jack at
the rear of your TV.
KV-XG29M60/XG25P50 only
•You can also connect video equipment to the t1 or 2 (video input) jacks
at the rear of your TV.
•Do not connect video equipment to the t2 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
Connecting audio/video equipment using the T
(monitor output) jacks
KV-XG29M60/XG25P50
Front of TV
Camcorder
Video game
equipment
To video and
audio outputs
: Signal flow
To t2
(video input)
or
Audio/Video cable (not supplied)
(yellow)
-L (MONO)
(white)
-R (red)
Rear of TV
To
antenna
output
To video and
audio inputs
or
Audio system
To
audio
inputs
VCR
: Signal flow
Antenna cable (not supplied)
Audio/Video cable
(not supplied)
L(MONO)R
2
L(MONO) R
PROGR
SELECT AUTO
PROGR
2
21
L(MONO)
R
continued
To T
(monitor
output)
Using Your New TV
8
Note
•If you connect a monaural VCR, connect the yellow plug to (the yellow
jack) and the black plug to -L (MONO) (the white jack).
(yellow)
-L (MONO)
(white)
-R (red)
Rear of TV
To
antenna
output
To video and
audio inputs
or
Audio system
To
audio
inputs
VCR
: Signal flow
To T
(monitor output)
Antenna cable (not supplied)
Audio/Video cable (not supplied)
L(MONO)R
1
Connecting optional components (continued)
KV-XA21M63/XA21M60
Using Your New TV 9
Using Your New TV
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
AWith the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.
or
BPut the cord or chain through the clamps to secure the TV against a wall or
pillar.
Note
•Use only the supplied screws. Use of other screws may damage the TV.
20
mm
3.8 mm
or
AB
Using Your New TV
10
Presetting
channels
You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.
Presetting channels automatically
1Press !to turn on the TV.
2Press AUTO PROGR.
Note (KV-XG29M60/XA21M63/XA21M60 only)
•During automatic channel presetting, your TV screen will indicate
“AUTO”for the TV system.
To preset channels automatically from a specified program number
(1) Press SELECT until “AUTO PROGRAM”appears.
(2) Press + or –.
The on-screen display will start flashing.
(3) Press PROGR +/–or the number buttons until the desired program number
appears.
(4) Press + or –.
Number buttons
~/1
SELECT
2+/–
PROGR +/–
+ or –
PIC MODE
TV
123
46
789
-0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
2
!
VHF LOW AUTO
AUTO
PROGR
2
L(MONO) R
PROGR
SELECT AUTO
PROGR
AUTO
PROGR
!
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Sony TV
Sony
Sony TRINITRON KV-B2531A Manuel utilisateur
Sony
Sony FD Trinitron WEGA KV-27FV300 Manuel utilisateur
Sony
Sony TRINITRON KV-21FK120 Manuel utilisateur
Sony
Sony WEGA KV-32XBR450 Manuel utilisateur
Sony
Sony Trinitron KV-21FS140 SCC-S79A-A Manuel utilisateur
Sony
Sony KD-34XBR960N - 34" Xbr Fd Trinitron Wega... Manuel utilisateur
Sony
Sony BRAVIA KLV-52V550A Manuel utilisateur
Sony
Sony KDL-26S3000 - 26" LCD TV Manuel utilisateur
Sony
Sony Trinitron KV-27S35 Manuel utilisateur
Sony
Sony Bravia KDL-42W706B Manuel utilisateur
Sony
Sony BRAVIA KD-75X9400E Manuel utilisateur
Sony
Sony WEGA KLV-L23M1 Manuel utilisateur
Sony
Sony Trinitron KV-XA34 Manuel utilisateur
Sony
Sony KD-79X9005B Manuel utilisateur
Sony
Sony KV-9PT60 - 9" Trinitron Color Tv Manuel utilisateur
Sony
Sony Trinitron KV-EF29 Manuel utilisateur
Sony
Sony Trinitron KV-XA34M66 Manuel utilisateur
Sony
Sony WEGA KV-AR25 Manuel utilisateur
Sony
Sony BRAVIA XR-65X90J Manuel utilisateur
Sony
Sony Bravia KDL-49W750E Manuel utilisateur
Manuels TV populaires d'autres marques
Philips
Philips Colour Television Manuel utilisateur
Toshiba
Toshiba 27A10 Manuel utilisateur
Philips
Philips 42PF9630A/37 Manuel utilisateur
Hitachi
Hitachi 32FX48B Manuel utilisateur
DAEWOO ELECTRONICS
DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur
Changhong Electric
Changhong Electric uhd55b6000is Manuel utilisateur
