Sony Trinitron KV-XA34 Manuel utilisateur

Trinitron Color TV

KV-XA34

KV-XA29

KV-XA25

4-078-793-52 (1)

Operating Instructions

M87

M86

M84

• Before operating the unit, please read this manual thoroughly and retain

it for future reference.

Do not place any objects on the TV.

To prevent fire or shock hazard, do not expose

the TV to rain or moisture.

Do not operate the TV if any liquid or solid object

falls into it. Have it checked immediately by

qualified personnel only.

Do not open the cabinet and the rear cover of the

TV as high voltages and other hazards are

present inside the TV. Refer servicing and

disposal of the TV to qualified personnel.

Your TV is recommended for home use only.

Do not use the TV in any vehicle or where it may

be subject to excessive dust, heat, moisture or

vibrations.

Do not block the ventilation openings of the TV.

Do not install the TV in a confined space, such

as a bookcase or built-in cabinet.

For children’s safety, do not leave children

alone with the TV. Do not allow children to

climb onto it.

Do not plug in too many appliances to the same

power socket. Do not damage the power cord.

Clean the TV with a dry and soft cloth.

Do not use benzine, thinner, or any other chemicals

to clean the TV. Do not scratch the picture tube.

For your own safety, do not touch any part of the

TV, the power cord and the antenna cable during

lightning storms.

WARNING

• Dangerously high voltages are present inside the TV.

• TV operating voltage: 110 – 240 V AC.

Advanced Operations

Selecting the picture and sound

modes .................................................. 13

Viewing your favorite channels .......14

Watching two programs at the

same time ............................................ 15

Listening with surround sound .......17

Viewing Teletext

(KV-XA34M86/XA25M86 only) ...... 18

Adjusting Your Setup (MENU)

Introducing the menu system .......... 20

Changing the “PICTURE”

setting ............................................ 23

Changing the “SOUND”setting

..... 25

Changing the “PIP” setting ........ 27

Changing the “SETUP” setting .. 28

Changing the Channel Preset

(“CH PRESET”) setting ............... 30

Additional Information

Self-diagnosis function...................... 33

Troubleshooting ................................. 34

Overview of controls ......................... 37

Specifications ...................... Back cover

Table of Contents

Using Your New TV

Getting Started ............................................................................................. 4

Step 1: Connect the antenna .................................................................. 4

Step 2: Insert the batteries into the remote .......................................... 5

Step 3: Preset the channels automatically ........................................... 5

Connecting the TWEETER (KV-XA25M87 only) .................................... 6

Connecting optional components ............................................................. 7

Securing the TV ............................................................................................ 9

Watching the TV ........................................................................................ 10

Using Your New TV

WARNING (continued)

Pull the power cord out by the plug. Do not pull

the power cord itself. Even if your TV is turned

off, it is still connected to the AC power source

(mains) as long as the power cord is plugged in.

Unplug the TV before moving it or if you are not

going to use it for several days.

Install the TV on a stable TV stand and floor

which can support the TV set weight. Ensure that

the TV stand surface is flat and its area is larger

than the bottom area of the TV.

4Using Your New TV

123

R L Y C

VIDEO

VIDEO IN

VIDEO OUT

AUDIO

R L

Getting Started

CAUTION

• Do not plug in the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through

the antenna and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries

from the remote if you are not going to use it for several days. If any

liquid that leaks from the batteries touches you, immediately wash it

away with water.

Step 1

Connect the antenna

If you wish to connect a VCR, see the Connecting a VCR diagram below.

Connecting a VCR

To watch the video input, press t(see page 11).

IEC connector

(not supplied)

To video and

audio outputs

VCR

(yellow)

-L (MONO) (white)

-R (red)

To S video

output

Antenna cable (not supplied)

To t1, 2 or 3

(video input)

Audio/Video cable

(not supplied)

S video cable

(not supplied)

: Signal flow

(S video input)

To antenna

output

To 8

(antenna)

: Signal flow

Antenna cable (not supplied)

Rear of TV

Using Your New TV

PROGRMENU AUTO

PROGR

ENTER SELECT

L(MONO)

2AUTO PROGRAM

PR : 01

TV SYS : B/G

VHF LOW

Notes

• If you connect a monaural VCR, connect the yellow plug to (the

yellow jack) and the black plug to -L (MONO) (the white jack).

• If you connect a VCR to the 8(antenna) terminal, preset the signal

output from the VCR to the program number 0 on the TV.

• If both (S video input) and t1 (video input) at the rear of your TV

are input at the same time, the (S video input) is automatically

selected. To view the video input to t1 (video input), disconnect the

S video cable.

• Do not connect video equipment to t3 (video input) at the front and

the rear of your TV at the same time; otherwise the picture will not be

displayed properly on the screen.

• When no signal is input from the connected video equipment, the TV

screen becomes blue.

Step 2

Insert the batteries

into the remote

Note

• Do not use old batteries nor use different types of batteries together.

Step 3

Preset the channels automatically

Tips

• If you want to stop the automatic channel presetting, press MENU.

• If your TV has preset an unwanted channel or cannot preset a particular

channel, then preset your TV manually (see page 31).

Note

• During automatic channel presetting, your TV screen will indicate “B/G”,

“I”, “D/K” or “M” for the TV system (“TV SYS”).

Front of TV

6Using Your New TV

Connecting the TWEETER

1Place the TWEETER on top of your TV.

2Bend the wire to hook it at the rear of your TV.

3Connect the wires to the TWEETER terminals at the rear of your TV. The

plain wire should be connected to the 3red terminal and the striped wire

to the #black terminal.

Notes

• Connect only the supplied TWEETER; otherwise your TV may

malfunction.

• Unplug your TV from the wall outlet when connecting the TWEETER.

• To prevent a malfunction caused by a short circuit of the terminals, make

sure that none of the TWEETER wire strands stick out, making contact

with the neighbouring speaker terminal.

You can enjoy high quality sound by connecting the TWEETER.

(KV-XA25M87 only)

123

(MONO)

R L Y C

TWEETER

Striped wire

Plain wire

Using Your New TV

123

L(MONO)

R L Y C

Connecting optional components

You can connect optional audio/video components, such as a VCR, multi disc player,

DVD, camcorder, video game or stereo system. To watch the picture of the connected

equipment, press t(see page 11).

Connecting a camcorder/video game equipment

using the t(video input) jacks

Notes

• You can also connect video equipment to the t1, 2 or 3 (video input)

jacks at the rear of your TV.

• If both (S video input) and t3 (video input) at the front of your TV

are input at the same time, the (S video input) is automatically

selected. To view the video input to t3 (video input), disconnect the

S video cable.

• Do not connect video equipment to the t3 (video input) jacks at the

front and the rear of your TV at the same time; otherwise the picture will

not be displayed properly on the screen.

Connecting audio/video equipment using the T

(monitor output) jacks

Note

• If you select “DVD” on your TV screen, no signal will be output at the T

(monitor output) jacks (see page 11).

To S video output

Front of TV

Camcorder

Video game

equipment

To video and

audio outputs

(yellow)

-L (MONO)

(white)

-R (red)

Rear of TV

antenna

output

To video and

audio inputs

Audio system

audio

inputs

VCR

: Signal flow

(S video

input)

To t3 (video input)

To T

(monitor

output)

Audio/Video cable (not supplied)

S video cable (not supplied)

Antenna cable (not supplied)

Audio/Video cable

(not supplied)

PROGRMENU AUTO

PROGR

ENTER SELECT

L(MONO)

L (MONO) R

continued

8Using Your New TV

Notes

• If your DVD player can output interlace and progressive mode signals, select

the interlace output when connecting to (component video input) on your

TV. Your TV can receive either 525i/60Hz or 625i/50Hz interlace signals.

• Some DVD player terminals may be labeled differently:

• Since the high quality pictures on a DVD disc contain a lot of information,

picture noise may appear. In this case, adjust the sharpness (“SHARP”) in the

“ADJUST” menu of the “PICTURE MODE” menu (see page 24).

Connecting a DVD player using the (component

video input) jacks

1 Connect R and L under (component video input) on your TV to the LINE OUT,

AUDIO R and L output connectors on your DVD player.

2 Using a component video cable, connect Y, CB, and CRunder (component video

input) on your TV to the COMPONENT VIDEO OUT Y, CB, and CRoutput

connectors on your DVD player.

DVD player

L (white)

R (red)

Audio cable

(not supplied)

To component

video output

Component video cable

(not supplied)

To audio

output

: Signal flow

(component

video input)

Connect To (on the DVD player)

Y (green) Y

CB(blue) Cb, B-Y or PB

CR(red) Cr, R-Y or PR

VIDEO

R-AUDIO-L

LINE OUT

COMPONENT VIDEO OUT

S VIDEO OUT

R L Y C

Rear of TV

Connecting a DVD player using the t(video input) jacks

VIDEO

R-AUDIO-L

LINE OUT

123

L(MONO)

DVD player

Audio/Video cable

(not supplied)

(yellow)

-L (MONO) (white)

-R (red)

To t1, 2, or 3

(video input)

: Signal flow

Rear of TV

Connecting optionals components (continued)

Using Your New TV

Securing the TV

To prevent the TV from falling, secure the TV using one of the following methods:

AWith the supplied screws, attach the band to the TV stand and to the rear of

the TV using the provided hole.

BPut the cord or chain through the clamps to secure the TV against a wall or

pillar.

Note

• Use only the supplied screws. Use of other screws may damage the TV.

3.8 mm

10 Using Your New TV

Watching the TV

This section explains various functions

and operations available while watching

the TV. Most operations can be done

using the remote.

1Press !to turn on the TV.

When the TV is in the

standby mode (the 1

indicator on the TV is lit

red), press ?/1 on the

remote or PROGR +/– on

the TV.

2Press PROGR +/– or

number buttons to select

the program number.

For double digit numbers,

press -, then the number

(e.g., for 25, press -, then

2 and 5).

To select a program number quickly

(1) Press and hold PROGR +/–.

(2) Release PROGR +/– when the desired program number appears.

Note

• When you select a program number quickly, the picture may be disrupted.

This does not indicate a malfunction.

?/1

Number buttons

JUMP

2+/–

PROGR +/–

V/b/v/B/ENTER

indicator

123

456

-/--

123

456

-/--

FAVORITE

SOUND

MODE SURROUND

PIP PROGR

ENTER

PIC MODE

PROGRMENU AUTO

PROGR

ENTER SELECT

L(MONO) R

PROGRMENU AUTO

PROGR

ENTER SELECT

Autres manuels pour Trinitron KV-XA34

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sony TV

Sony

Sony BRAVIA KDL-40XBR9 Manuel utilisateur

Sony

Sony Trinitron KV-27TW77 Manuel utilisateur

Sony

Sony XR65A95K Manuel utilisateur

Sony

Sony KD-28DX40U Manuel utilisateur

Sony

Sony BRAVIA KDL-55W800C Guide de l'utilisateur

Sony

Sony KV-27XBR55 - 27" Ctv Xbr Manuel utilisateur

Sony

Sony KDL-32EX40B Marketing Manuel utilisateur

Sony

Sony BRAVIA KD50X75WL Manuel utilisateur

Sony

Sony BRAVIA KD-55X70 Series Manuel utilisateur

Sony

Sony Trinitron WEGA KV-SZ292 Manuel utilisateur

Sony

Sony Trinitron KV-29VX2 Manuel utilisateur

Sony

Sony BRAVIA KDL-37M3000 Mode d’emploi

Sony

Sony KV-XA21M80 Manuel utilisateur

Sony

Sony Trinitron KV-PF21 Manuel utilisateur

Sony

Sony Bravia KDL-32W600A Mode d'emploi

Sony

Sony TRINITRON KV-VF14M70 Manuel utilisateur

Sony

Sony Trinitron KV-24FV10 Manuel utilisateur

Sony

Sony KV-EH36M31 Manuel utilisateur

Sony

Sony KZ-32TS1E Manuel utilisateur

Sony

Sony Wega KV-BZ14 Manuel utilisateur

Sony

Sony WEGA KV-28FQ86K Manuel utilisateur

Sony

Sony Trinitron KV-27S42 Manuel utilisateur

Sony

Sony KDL-40V3000 Manuel utilisateur

Sony

Sony KV-EF34 Manuel utilisateur

Manuels TV populaires d'autres marques

Philips

Philips Colour Television Manuel utilisateur

Toshiba

Toshiba 27A10 Manuel utilisateur

Philips

Philips 42PF9630A/37 Manuel utilisateur

Hitachi

Hitachi 32FX48B Manuel utilisateur

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur

Changhong Electric

Changhong Electric uhd55b6000is Manuel utilisateur

Philips

Philips Matchline 21CE7551 Manuel utilisateur

Panasonic

Panasonic Genus TX-G10 Manuel utilisateur

Toshiba

Toshiba 19A20 Manuel utilisateur

Philips

Philips 25PT4523-16 Manuel utilisateur

Philips

Philips PR0930X3 Manuel utilisateur

Philips

Philips Brilliance 231P4QPY Manuel utilisateur

Samsung

Samsung 55S9 B Series Manuel utilisateur

Philips

Philips 32HF9385D Guide de dépannage

Sharp

Sharp LC-40FI5012E Manuel utilisateur

Loewe

Loewe Table Stand Reference 55 Manuel utilisateur

Philips

Philips 32PFH5300 Manuel utilisateur

Sylvania

Sylvania 6427FB Manuel utilisateur