Sony SDX-D250V Manuel

SDX-D550V/D450V/D250V

AIT Drive Unit

2-546-779-21(1)

Operator’s Guide –––––––––page 2

取扱説明書

–––––––––––––––29

ページ

Mode d’emploi –––––––––––page 60

Benutzerhandbuch –––––––Seite 88

Guía del operador ––––––––página 116

Istruzioni per l’uso ––––––––pagina 144

–––––––––––––––––172

––––––––––––––––199

––––––––––––––––225

2Safety Regulations

Safety Regulations

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial

number in the space provided below.

Refer to them whenever you call upon your dealer regarding this product.

Model No. Serial No.

________________________ __________________________________

Information

WARNING

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

Model No. for Regulatory Compliance

Your SDX-D550V is assigned a Model No.: ATDEA3 for regulatory

compliance certifications.

Your SDX-D450V and SDX-D250V are assigned a Model No.: ATDEA2 for

regulatory compliance certifications.

The number is indicated on the model number label on your drive along with

the rated voltage and current.

For the customers in the USA

You are cautioned that any changes or modifications not expressly approved

in this manual could void your authority to operate this equipment.

If you have any questions about this product, please refer to Sony contact in

the instruction manual.

DECLARATION OF CONFORMITY

Trade Name: SONY

Model: ATDEA2, ATDEA3

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo San Diego, CA.

92127 U.S.A.

Telephone number: 858-942-2230

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Safety Regulations 3

WARNING

Note: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device requires shielded interface cables to comply with FCC emission

limits.

CAUTION

The mains plug on this equipment must be used to disconnect mains power.

Please ensure that the socket outlet is installed near the equipment and shall

be easily accessible.

NOTICE

Use the power cord set approved by the appropriate testing organization for

the specific countries where this unit is to be used.

English

4Safety Regulations

IMPORTANT SAFEGUARDS

For your protection, please read these safety

instructions completely before operating the

appliance, and keep this manual for future

reference.

Carefully observe all warnings, precautions and

instructions on the appliance, or the one described

in the operating instructions and adhere to them.

USE

Power Sources – This unit should be operated

only from the type of power source indicated on

the marking label. If you are not sure of the type

of electrical power, consult your dealer or local

power company.

For the unit with a three-wire grounding type

ac plug:

If you are unable to insert the plug into the outlet,

contact your electrician to have a suitable plug

installed. Do not defeat the safety purpose of the

grounding plug.

AC Power cord:

The AC power cord should have appropriate safety

approvals or marking for the country in which the

equipment will be used. Consult your dealer or

local power company.

Cleaning – Unplug the unit from the wall outlet

before cleaning or polishing it. Do not use liquid

cleaners or aerosol cleaners.

Use a cloth lightly dampened with water for

cleaning the exterior of the unit.

Object and Liquid Entry – Never push objects of

any kind into the unit through openings as they

may touch dangerous voltage points or short out

parts that could result in a fire or electric shock.

Never spill liquid of any kind on the unit.

Safety Regulations 5

INSTALLATION

Water and Moisture – Do not use power-line

operated units near water - for example, near a

bathtub, washbowl, kitchen sink, or laundry tub, in

a wet basement, or near a swimming pool, etc.

Power-Cord Protection – Route the power cord

so that it is not likely to be walked on or pinched

by items placed upon or against them, paying

particular attention to the plugs, receptacles, and

the point where the cord exits from the appliance.

Accessories – Do not place the unit on an unstable

cart, stand, tripod, bracket, or table. The unit may

fall, causing serious injury to a child or an adult,

and serious damage to the unit. Use only a cart

stand tripod, bracket, or table recommended by the

manufacturer.

Ventilation – The slots and openings in the

cabinet are provided for necessary ventilation. To

ensure reliable operation of the unit, and to protect

it from overheating, these slots and openings must

never be blocked or covered.

•Never cover the slots and openings with a cloth

or other materials.

•Never block the slots and openings by placing

the unit on a bed, sofa, rug or other similar

surface.

•Never place the unit in a confined space, such as

a bookcase, or built-in cabinet, unless proper

ventilation is provided.

SERVICE

Damage Requiring Service – Unplug the unit

from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

•When the power cord or plug is damaged or

frayed.

•If liquid has been spilled or objects have fallen

into the unit.

•If the unit has been exposed to rain or water.

•If the unit has been subject to excessive shock by

being dropped, or the cabinet has been damaged.

• If the unit does not operate normally when

following the operating instructions. Adjust

only those controls that are specified in the

operating instructions. Improper adjustment of

other controls may result in damage and will

often require extensive work by a qualified

technician to restore the unit to normal

operation.

•When the unit exhibits a distinct change in

performance - this indicates a need for service.

Servicing – Do not attempt to service the unit

yourself as opening or removing covers may

expose you to dangerous voltage or other hazards.

Refer to all servicing to qualified service

personnel.

6Table of Contents

Table of Contents

Part 1.

Introduction

How to Use this Guide ...................................................................... 7

About AIT Drives ............................................................................... 8

Features.................................................................................................... 8

Useable Cartridges................................................................................... 9

System Components ................................................................................ 9

Part Names and Functions ............................................................. 10

Front Panel ............................................................................................. 10

Rear Panel .............................................................................................. 11

Part 2.

Preparation

Supplied Items................................................................................. 12

Interconnections ............................................................................. 12

SCSI ID Setting ................................................................................ 13

Option Switches (DIP Switch) ........................................................ 13

Part 3.

Operation

How to use the AIT Drive ................................................................ 16

Cartridge Removal ................................................................................. 17

Attaching the Dust Cover ............................................................... 18

WORM Function .............................................................................. 20

Part 4.

Care and

Maintenance

Taking Care of the Drive ................................................................. 22

Safety Considerations ............................................................................ 22

Avoiding Damage .................................................................................. 22

Taking Care of Cartridges .............................................................. 24

Use Precautions ..................................................................................... 24

Storage Precautions ............................................................................... 24

Cleaning ........................................................................................... 25

How to Clean ......................................................................................... 25

Appendix Specifications (SDX-D550V) ........................................................... 26

Specifications (SDX-D450V) ........................................................... 27

Specifications (SDX-D250V) ........................................................... 28

How to Use this Guide 7

How to Use this Guide

This Guide describes the AIT Drive Unit SDX-D550V/SDX-D450V/

SDX-D250V, and how to take care of it. Please read it carefully before using

the unit, and keep it handy for future reference.

The Guide consists of four parts, plus the specifications. Refer to the parts

that relate to your use of the drive.

Part 1 describes the features of the drive, its system components, and the

name and function of each part.

Part 2 describes the necessary connections between the drive and the host

computer. If other SCSI devices are being used, you may need to change the

SCSI ID setting. Read this part if you are installing the drive.

Part 3 describes how to use the drive, including how to turn it on, and how

to insert and remove cartridges. Read this part if you are going to operate the

drive.

Part 4 describes how to take care of the drive and cartridges, and how to

clean the drive. Read this part before using the drive.

Appendix provides the major specifications of the SDX-D550V/

SDX-D450V/SDX-D250V.

8Part 1. Introduction

Part 1. Introduction

About AIT Drives

The SDX-D550V is an external AIT drive unit that uses data cartridges

conforming to the AIT-2 Turbo format. The SDX-D450V is an external AIT

drive unit that uses data cartridges conforming to the AIT-1 Turbo format.

The SDX-D250V is an external AIT drive unit that uses data cartridges

conforming to the AIT-E Turbo format.

The SDX-D550V supports the AIT-E Turbo, AIT-1, AIT-1 Turbo, AIT-2 and

AIT-2 Turbo formats. The SDX-D450V supports the AIT-E Turbo, AIT-1

and AIT-1 Turbo formats. The SDX-D250V only supports the AIT-E Turbo

format.

Features

The AIT Drive Unit SDX-D550V has the following features:

•Supports reading and writing to data cartridges conforming to the AIT-E

Turbo, AIT-1, AIT-1 Turbo, AIT-2 and AIT-2 Turbo formats.

•Read After Write Function and third-level error correction code guarantee

high data reliability.

•Data compression provides 208 gigabytes of storage on TAIT2-80N,

TAIT2-80C.*1

The native capacity is 80 gigabytes of storage on TAIT2-80N, TAIT2-80C.

• Stored data is automatically checked for compression.

•Ultra 160 Wide SCSI LVD/SE interface is fully supported for host

computer access.

The AIT Drive Unit SDX-D450V has the following features:

•Supports reading and writing to data cartridges conforming to the AIT-E

Turbo, AIT-1 and AIT-1 Turbo formats.

•Read After Write Function and third-level error correction code guarantee

high data reliability.

•Data compression provides 104 gigabytes of storage on TAIT1-40N,

TAIT1-40C.*1

The native capacity is 40 gigabytes of storage on TAIT1-40N, TAIT1-40C.

• Stored data is automatically checked for compression.

•Wide Ultra SCSI LVD/SE interface is fully supported for host computer

access.

*1 This is assuming 2.6:1 compression ratio.

The degree of data compression attained while recording data varies according to system

environment and data type.

Part 1. Introduction 9

The AIT Drive Unit SDX-D250V has the following features:

•Supports reading and writing to data cartridges conforming to the AIT-E

Turbo format.

•Read After Write Function and third-level error correction code guarantee

high data reliability.

•Data compression provides 52 gigabytes of storage on TAITE-20N.*1

The native capacity is 20 gigabytes of storage on TAITE-20N.

• Stored data is automatically checked for compression.

•Wide Ultra SCSI LVD/SE interface is fully supported for host computer

access.

*1 This is assuming 2.6:1 compression ratio.

The degree of data compression attained while recording data varies according to system

environment and data type.

Useable Cartridges

Data cartridges used with the the SDX-D550V can be used with data

cartridges marked with AIT-E Turbo, AIT-1 Turbo, AIT-2 Turbo, AIT-1 or

AIT-2 logo. The SDX-D450V must be marked with AIT-E Turbo, AIT-1

Turbo or AIT-1 logo. The SDX-D250V can be used with data cartridges

marked with the AIT-E Turbo logo.

AIT-E Turbo LOGO AIT-1 Turbo LOGO AIT-2 Turbo LOGO AIT-1 LOGO AIT-2 LOGO

Caution

•Be sure to use only the cartridges designed specifically for AIT.

•Do not use anything but AIT cartridges with this system, as doing so can

damage the AIT drive. Although commercially available 8 mm videotapes

resemble AIT cartridges in appearance, they have entirely different

specifications and cannot be used.

System Components

The SDX-D550V/SDX-D450V/SDX-D250V connects to the host computer

via on Ultra Wide LVD/SE SCSI interface.

SDX-D550V

SDX-D450V

SDX-D250V

Host Computer

Peripheral Devices Terminator

10 Part 1. Introduction

Part Names and Functions

Front Panel

Advanced

Intelligent

Tape

6354

1AIT Data Cartridge Receptacle

See page 16 to 17 for information on inserting and removing a AIT data

cartridge.

2POWER Indicator

Lights while the drive is on.

3Dust Cover

This cover protects the AIT data cartridge receptacle.

4LED Indication for Drive Status

The LED indicators are defined as follows.

LED

TAPE CLEANING REPLACE Sense

MOTION REQUEST TAPE

Independent Independent Tape Loaded

Independent Independent Tape Access in Progress

(write/read)

Independent Independent Tape Access in Progress (others)

Independent Independent Cleaning is requested

Independent Independent Cleaning is Not Completed

Independent Independent Media Error Occurred

H/W Error Occurred

Slow

1 pulse (0.9 sec on/0.3 sec off)

Fast

1 pulse (0.3 sec on/0.3 sec off)

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Sony Stockage

Sony

Sony MicroVault USM8GL Manuel utilisateur

Sony

Sony SF Series Manuel utilisateur

Sony

Sony VGN-NW Series Mode d’emploi

Sony

Sony PDW-1 Manuel utilisateur

Sony

Sony MicroVault USM1GH Manuel utilisateur

Sony

Sony VPCEB Series Mode d’emploi

Sony

Sony StorStation LIB-81 Manuel utilisateur

Sony

Sony SR Series Manuel utilisateur

Sony

Sony CSMA-EX200S Manuel utilisateur

Sony

Sony MS-HX16A Manuel utilisateur

Sony

Sony USM1GE Manuel utilisateur

Sony

Sony SDT-S11000 Manuel utilisateur

Sony

Sony MS-A16GU2 Manuel utilisateur

Sony

Sony SRR1000 Manuel utilisateur

Sony

Sony MicroVault USM4GM Manuel utilisateur

Sony

Sony WALKMAN SUP-NWE020 Manuel utilisateur

Sony

Sony HDD Manuel utilisateur

Sony

Sony M2 MS-A Series Manuel utilisateur

Sony

Sony SDZ-100 Manuel utilisateur

Sony

Sony SDX-870V Serie Manuel utilisateur

Sony

Sony MSA-16A Manuel utilisateur

Sony

Sony HD-E1 Manuel utilisateur

Sony

Sony HD-EG5U Manuel utilisateur

Sony

Sony ODS-L30M Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur