Sony RM-US106 Manuel utilisateur

4-247-238-12(1)

Remote

Commander

Operating Instructions ________________________

Mode d’emploi______________________________

RM-US106

2GB

Precautions

On safety

Should any solid object or liquid fall into the cabinet,

unplug the receiver and have it checked by qualified

personnel before operating it any further.

On operation

Before connecting other components, be sure to turn

off and unplug the receiver.

On cleaning

Clean the cabinet, panel and controls with a soft cloth

slightly moistened with a mild detergent solution. Do

not use any type of abrasive pad, scouring powder or

solvent such as alcohol or benzine.

If you have any question or problem concerning

your remote, please consult your nearest Sony

dealer.

Before you use your remote

Inserting batteries into the

remote

Insert two R6 (size-AA) batteries with the + and

– properly oriented in the battery compartment.

Tip

Under normal conditions, the batteries should last for

about 6 months. When the remote no longer operates

the receiver, replace all the batteries with new ones.

Notes

• Do notleavethe remote in an extremely hot orhumid

place.

• Do not use a new battery with old ones.

• Do not expose the remote sensor of the receiver to

direct sunlight or lighting apparatuses. Doing so may

cause a malfunction.

• If you don’t use the remote for an extended period of

time, remove the batteries to avoid possible damage

from battery leakage and corrosion.

3GB

Location of Parts and Basic

Remote Operations

Parts description......................................4

Advanced Remote Operations

Changing button assignments.................6

2nd (3rd) zone operations .......................7

Additional Information

Troubleshooting......................................8

Specifications..........................................8

Table of Contents

4GB

This chapter provides information on the

location of buttons and how to use them to

perform basic operations.

However, some functions explained in this

section may not work depending on the model of

the receiver.

For the functions of the receiver you purchased,

refer to the Operating Instructions supplied with

the receiver.

Operating the main receiver

from the 2nd (or 3rd) zone

?/1 1

Press to turn the receiver in the 2nd (or 3rd)

zone on or off.

Command mode buttons 2

Press to select the command mode of the

remote (2ND ZONE or 3RD ZONE).

3RD ZONE mode is only for STR-

DA5000ES and STR-DA9000ES.

Input buttons 3

Press one of the buttons to select the

component you want to use. When you

press any of the input buttons, the receiver

turns on.The buttonsare factoryassigned to

control Sony components as follows. You

can change the button assignments

following the steps in “Changing button

assignments” on page 6.

a) STR-DA9000ES only.

b) The setting cannot be changed.

MASTER VOL +/– 6

Press to adjust the volume level for 2ND

ZONE or 3RD ZONE output.

MUTING 5

Press to mute the sound.

Location of Parts and Basic Remote

Operations

This remote is only for 2ND ZONE out and

3RD ZONE out operations. You cannot

control the main receiver directly with this

remote.

Parts description

+–

VIDEO 1 VIDEO 2

USE MODE

VIDEO 3

VIDEO 4 VIDEO 5 LD

DVD TV/SAT TAPE

CH/PRESET/D.SKIP

SHIFT

MUTING

MASTER

VOL

MD/DAT CD/SACD TUNER

2ND ZONE 3RD ZONE

–

?/1

SOURCE

Button Assigned Sony component

VIDEO1 VCR (VTR mode 3)

VIDEO2 VCR (VTR mode 1)

VIDEO3 VCR (VTR mode 2)

VIDEO4a) VCR (VTR mode 4)

VIDEO5a) VCR (VTR mode 5)

LDa) LD player

DVD DVD player

TV/SAT TV tuner

TAPE Tape deck B

MD/DAT MD deck

CD/SACD CD/Super Audio CD player

TUNERb) Built-in tuner

SOURCE The currentinputselectedfor the

main receiver

5GB

Location of Parts and Basic Remote Operations

SHIFT 4

When the tuner is selected, press repeatedly

to select a memory page for presetting radio

stations or tuning to preset stations.

USE MODE 9

Press to change the category of the buttons.

USE MODE indicator q;

Operating the components

connected to the main

receiver from the 2nd (or 3rd)

zone

CH/PRESET/D.SKIP +/–*7

Press repeatedly to select a preset station or

channel. When using a multi-disc changer,

press to skip a disc.

Operation buttons*8

The following table describes the function

of the buttons.

* The function of these buttons switches automatically

each time you press the input buttons (3). The

above explanation is intended to serve as an example

only. Therefore, depending on the component, the

above operation may not be possible or may operate

differently than described.

Button(s) Function

NStarts play. (Starts play on the

front side of the cassette.)

nStarts play on the reverse side of

the cassette.

XPauses play or recording, and

starts recording when the

component is in recording

standby.

xStops play.

./> Skips tracks.

m/M Fast forwards or rewinds.

6GB

You can change the factory settings of the input

buttons to suit the components in your system.

For example, if you connect a LD player to the

VIDEO2 jacks on the receiver, you can set the

VIDEO2 button on this remote tocontrol the LD

player.

Note, however, that the settings of the TUNER

button cannot be changed.

1Press USE MODE for more than 2

seconds.

The indicator lights up.

2Press the input button you want to

change the assignment of.

The indicator turns off once and turns on

again when a valid button is pressed. Only

the first input button that is pressed will be

registered.

Example: Press VIDEO2.

3Refering to the table below, press the

input button for the category you want.

The indicator turns off when a valid button

is pressed.

Example: Press DVD twice.

4Press SOURCE.

The new assignment is registered.

The indicator slowly lights up twice, then

goes off.

To cancel

Press USE MODE during any step.

Tip

If the operation is unsuccessful, the indicator flashes

four times and the remote automatically exits the

button assignment mode. In this case, the new

assignment is not registered and the previous setting

remains.

Notes

• If you do not press a button during step 2 through 4

within 60 seconds, the remote automatically exits the

button assignment mode. Start again from step 1.

• In step 3, if you press the same button more than the

possible number of categories that can be selected,

only the last category is registered for the new

assignment.

Valid buttons and the

corresponding categories

To clear all remote button

assignments

Hold down USE MODE, then press ?/1.

The remote is reset to its factory-setting.

Advanced Remote Operations

Changing button

assignments

Corresponding

categories Press

VTR-1 VIDEO1 once

VTR-2 VIDEO2 once

VTR-3 VIDEO3 once

VTR-4 VIDEO1 twice

VTR-5 VIDEO2 twice

VTR-6 VIDEO3 twice

DVD player DVD once

LD player DVD twice

TV TV/SAT once

SAT TV/SAT twice

Tape deck-A TAPE once

Tape deck-B TAPE twice

MD deck MD/DAT once

DAT deck MD/DAT twice

CD player-1 CD/SACD once

CD player-2 CD/SACD twice

CD player-3 CD/SACD three times

VIDEO CD player VIDEO1, then CD/SACD

Advanced Remote Operations

7GB

When using a Sony receiver as an amplifier in

the 2nd (or 3rd) zone and it is connected to the

main receiver (STR-DA9000ES/STR-

DA5000ES/STR-DA3000ES) using an IR

repeater (not supplied) as shown below, the

following operations are possible.

The 3rd zone operation is for STR-DA5000ES

and STR-DA9000ES only.

• Switching the output source for the 2ND (or

3RD) ZONE OUT jacks.

• Switching the Sony receiver’s power on or off

in the 2nd (or 3rd) zone.

• Adjusting the volume of the Sony receiver in

the 2nd (or 3rd) zone.

Perform the following operation to set the

command mode of the remote to 2ND ZONE or

3RD ZONE.

Press 2ND ZONE or 3RD ZONE.

The command mode has been set to the 2nd or

3rd zone mode.

Example of controlling the amplifier in the

2nd room

2nd (3rd) zone operations

To Do the following

Turn the power on or off Press ?/1.

Listen to the sound of the CD

player connected to the CD

input jacks

Press CD/SACD,

then press H.

Adjust the volume Press MASTER

VOLUME +/–.

2ND

(3RD)

ZONE

OUT

RM-US106

–

+–

STR-DA9000ES

STR-DA5000ES

STR-DA3000ES

Audio/video components

Main receiver 2nd (or 3rd) zone

IR repeater

(not supplied)

IR repeater

(not supplied)

Monitor

(2nd zone only)

Speaker Speaker

Amplifier

8GB

If you experience any of the following

difficulties while using the receiver, use this

troubleshooting guide to help you remedy the

problem. Should any problem persist, consult

your nearest Sony dealer.

The remote does not function.

• Check that you select the correct mode of the

remote.

• Point the remote at the remote sensor on the

receiver.

• Remove any obstacles in the path between the

remote and the receiver.

• Replace both batteries in the remote with new

ones, if they are weak.

• Make sure you select the correct input on the

remote.

General

Remote control system Infrared control

Power requirements 3 V DC with two R6

(size-AA) batteries

Dimensions 210 × 45 × 25 mm

Mass (approx.) 95 g excluding batteries

Design and specifications are subject to change

without notice.

Additional Information

Troubleshooting

Specifications

2FR

Précautions

Sécurité

Si un solide ou un liquide pénètre dans le coffret,

débranchez l’ampli-tuner et faites-le vérifier par un

professionnel avant de le remettre en service.

Fonctionnement

Avant de raccorder d’autres appareils, veillez à mettre

l’ampli-tuner hors tension et à le débrancher.

Nettoyage

Nettoyez le coffret, le panneau avant et les commandes

avec un chiffon doux, légèrement imprégné d’une

solution détergente douce. N’utilisez pas de tampon

abrasif, poudre à récurer ou solvant, comme l’alcool ou

la benzine.

Pour toute question ou difficulté au sujet de

l’ampli-tuner, veuillez contacter le revendeur

Sony le plus proche.

Avant d’utiliser la

télécommande

Mise en place des piles dans la

télécommande

Insérez deux piles R6 (taille AA) en orientant

correctement les pôles + et – dans le logement.

Conseil

Normalement les piles devraient durer environ 6 mois.

Lorsque la télécommande ne permet plus de faire

fonctionner l’ampli-tuner, remplacez toutes les piles

par des neuves.

Remarques

• Ne pas laisser la télécommande à un endroit

extrêmement chaud ou humide.

• Ne pas utiliser une pile neuve avec des piles usées.

• Ne pas exposer le capteur de rayons infrarouges de

l’ampli-tuner à la lumière directe du soleil ou d’une

lampe. Cela risque de provoquer un

dysfonctionnement.

• Si vous prévoyez de ne pas utiliser la télécommande

pendant un certain temps, enlevez les piles pour

éviter toute fuite et corrosion.

Table des matières

Langues :

Autres manuels Sony Télécommande

Sony

Sony Bravia KE-55XH9005 Instructions de fonctionnement

Sony

Sony SVT-RM10 Manuel utilisateur

Sony

Sony RM-V302 Guide de l'administrateur

Sony

Sony RM-1BP Manuel utilisateur

Sony

Sony RM-KZ1 Operating Instructions and Manufacturers Code... Manuel utilisateur

Sony

Sony RM-MC60 Manuel utilisateur

Sony

Sony RM-VL900T Manuel utilisateur

Sony

Sony VCT-D580RM Manuel utilisateur

Sony

Sony RM-V302T Manuel utilisateur

Sony

Sony RM-XM10B Manuel utilisateur

Sony

Sony RM-PP402 Manuel utilisateur

Sony

Sony RM-MC35ELK Manuel utilisateur

Sony

Sony RM-IP10 Manuel utilisateur

Sony

Sony RM-VL610 - Integrated Remote Commander Manuel utilisateur

Sony

Sony RM-VL700S Guide de l'administrateur

Sony

Sony RM-TP502 Manuel utilisateur

Sony

Sony RM-V202T Manuel utilisateur

Sony

Sony RMT-DSLR1 - Alpha Camera Remote Manuel utilisateur

Sony

Sony RM-AX4000 - Integrated Remote Commander Manuel utilisateur

Sony

Sony NHS-502 Manuel utilisateur

Sony

Sony RM-AV2500T Manuel utilisateur

Sony

Sony RMF-YD001 Manuel utilisateur

Sony

Sony RM-EZ4T Manuel utilisateur

Sony

Sony RM-PCM1 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation