Sony RM-LJ312 Manuel utilisateur

model name1[RM-LJ312]

[4-247-235-11(1)]

filename[\\Nas-data-server\SONY Current jobs\SONY RM-

LJ312\DTP\4247235111\424723511RMLJ312U\GB01COV_RM-LJ312-U.fm] masterpage:Right

4-247-235-11(1)

Remote

Commander

Operating Instructions

RM-LJ312

masterpage:Left

filename[\\Nas-data-server\SONY Current jobs\SONY RM-

LJ312\DTP\4247235111\424723511RMLJ312U\GB02REG_RM-LJ312-U.fm]

2GB

model name1[RM-LJ312]

[4-247-235-11(1)]

Precautions

On safety

Should any solid object or liquid fall into the cabinet,

unplug the receiver and have it checked by qualified

personnel before operating it any further.

On operation

Before connecting other components, be sure to turn

off and unplug the receiver.

On cleaning

Clean the cabinet, panel and controls with a soft cloth

slightly moistened with a mild detergent solution. Do

not use any type of abrasive pad, scouring powder or

solvent such as alcohol or benzine.

If you have any question or problem concerning your

remote, please consult your nearest Sony dealer.

Before you use your remote

Inserting batteries into the

remote

Insert three R6 (size-AA) batteries with the +

and – properly oriented in the battery

compartment.

Tip

Under normal conditions, the batteries should last for

about 3 months. When the remote no longer operates

the receiver, replace all the batteries with new ones.

Notes

• Do not leave the remote in an extremely hot or humid

place.

• Do not use a new battery with old ones.

• Do not mix the alkaline batteries and other kinds of

batteries.

• Do not expose the remote sensor of the receiver to

direct sunlight or lighting apparatuses. Doing so may

cause a malfunction.

• If you do not use the remote for an extended period

of time, remove the batteries to avoid possible

damage from battery leakage and corrosion.

When you use the remote for the first time, be sure to

perform the AMP REGIST operation (page 6). Some

functions may not be displayed depending of the

model.

masterpage:Right

filename[\\Nas-data-server\SONY Current jobs\SONY RM-

LJ312\DTP\4247235111\424723511RMLJ312U\GB02REG_RM-LJ312-UTOC.fm]

model name1[RM-LJ312]

[4-247-235-11(1)]

3GB

Location of parts and basic

remote operations

Parts description......................................4

Table of buttons used to control each

component ........................................7

Using the lists

Chart of lists..........................................11

Selecting a component..........................13

Listening to multi channel sound..........14

— MULTI CH IN

Selecting a sound field..........................15

Enjoying Dolby Pro Logic II and DTS

NEO:6.............................................15

Programming the remote.......................16

Performing several commands in

sequence automatically...................17

— Macro Play

Using the RECEIVER menu.................20

Learning the commands of your

components.....................................20

Downloading data from the receiver.....22

Other operations....................................24

Additional Information

Troubleshooting......................Back cover

Specifications..........................Back cover

Table of Contents

masterpage:Left

filename[\\Nas-data-server\SONY Current jobs\SONY RM-

LJ312\DTP\4247235111\424723511RMLJ312U\GB03BSC_RM-LJ312-U.fm]

4GB

model name1[RM-LJ312]

[4-247-235-11(1)]

This chapter provides information on the

location of buttons and how to use them to

perform basic operations.

However, some functions explained in this

section may not operate depending on the

receiver.

For the functions of the receiver you purchased,

refer to the Operating Instructions supplied with

the receiver.

?/1 1

Press to turn the receiver on or off.

For STR-DA5000ES, if the 2ND ZONE or

3RD ZONE is selected, only the main

receiver is turned on or off with thisbutton.

To turn off all components including the

amplifier in the 2nd or 3rd zone, press ?/1

and AV ?/1 (2) at the same time

(SYSTEM STANDBY).

AV ?/1 2

Press to turn on or off the components that

the remote is programmed to operate. For

details on programming procedure, see

“Programming the remote” on page 16.

If you press the ?/1 switch (1) at the

same time, it will turn off the main

component and other Sony audio/video

components (SYSTEM STANDBY).

Note

The function of the AV ?/1 switch changes

automatically each time you press INPUT

SELECTOR (4). Depending on the component,

the above operation may not be possible or may

operate differently than described.

AV MENU ws

Press to display the menus of the VCR,

DVD player, or satellite tuner on the TV

screen. Then use the control button to

perform the menu operations.

Control button w;

After pressing MAIN MENU, TOP

MENU/GUIDE, or AV MENU, move the

control button up, down, left or right to

select the settings. When you press TOP

MENU/GUIDE or AV MENU, press the

button to enter the selection.

To perform menu operations on the VCR,

DVD player, or SAT tuner, do the

procedure below. If you do not do this, the

cursor buttons merely operate the receiver.

1Press INPUT SELECTOR and move the

easy scroll key to select the input, then

press the key to enter the selection.

2Press MAIN MENU, TOP MENU/

GUIDE, or AV MENU.

The CURSOR TYPE list appears. If the

list has disappeared before you go on to

step 3, press any of the cursor buttons to

restore the list.

3Move the easy scroll key to select the

component that you selected in step 1,

then press the key to enter the selection.

Location of parts and basic remote

operations

Parts description

–

AV ?/1TV ?/1

SOUND FIELD

TOP MENU/GUIDE AV MENU

DISPLAY

TV VOL TV CH TV/VIDEO

WIDE

MAIN

ON SCREEN

RETURN/EXIT

MASTER

VOL

MUTING

INPUT SELECTOR

SYSTEM STANDBY

RM SET UP

?/1

HX x

.> m M

Location of parts and basic remote operations

masterpage:Right

filename[\\Nas-data-server\SONY Current jobs\SONY RM-

LJ312\DTP\4247235111\424723511RMLJ312U\GB03BSC_RM-LJ312-U.fm]

5GB

model name1[RM-LJ312]

[4-247-235-11(1)]

DISPLAY ql

Press to select information displayed on the

TV screen.

Display window 3

The current status of the selected

component or a list of selectable items

appears here.

Note

Characters other than letters of the alphabet or

numbers may be displayed incorrectly on the

remote, even if they appear correctly in the

display window on the main unit.

Easy scroll key wg

While displaying a list, move up or down to

select an item from the list, and then press

to enter the selection.

INPUT SELECTOR 4

Press to display the input (component) list.

See the table on page 7 for information on

the buttons you can use to control each

component.

If you want to change the contents of the

input list to match your particular

components, see “Programming the

remote” on page 16.

MAIN MENU qd

Press repeatedly to select a menu

(SURROUND, etc.) for the receiver.

MASTER VOL +/– qa

Press to adjust the volume level of all

speakers at the same time.

MUTING q;

Press to mute the sound.

ON SCREEN qf

Press to display the menus of the receiver

on the TV screen.

RETURN O/EXIT qk

Press to return to the previous menu or exit

the menu while the menu or guide of the

VCR, DVD player, or satellite tuner is

displayed on the TV screen.

RM SET UP 5

Press to display the set up list.

SOUND FIELD wh

Press to display the sound field list.

For details, see page 15.

TOP MENU/GUIDE wa

Press to display the menu or guide of the

DVD player or satellite tuner on the TV

screen. Then use the control button to

perform the menu operations.

TV ?/1 wj

Press to turn TV on or off.

TV/VIDEO qs

Press to change the input mode of the TV.

TV CH +/– qh

Press to switch the channel of TV.

TV VOL +/– qj

Press to adjust the volume of TV.

WIDE qg

Press to switch the TV to the wide mode.

I/i 6

Press to change the information displayed

on the display. Press the Ibutton

repeatedly to display the RECEIVER

menu, press the ibutton repeatedly to

display the SUB menu (page 8) or NUM

menu.

IntheNUM menu, movetheeasyscroll key

to select the numeric value, then press the

key to enter the selection.

H* wd

Press to start play of the playback medium.

X* 9

Press to pause play or recording, or press to

start recording when the component is in

recording standby.

x* 8

Press to stop play.

./>* wf

Press to skip tracks.

m/M* 7

Press to fast-forward or rewind, or search

tracks in the forward or backward direction.

continued

masterpage:Left

filename[\\Nas-data-server\SONY Current jobs\SONY RM-

LJ312\DTP\4247235111\424723511RMLJ312U\GB03BSC_RM-LJ312-U.fm]

6GB

model name1[RM-LJ312]

[4-247-235-11(1)]

* Seethe tableonpage 7forinformationonthe buttons

that you can use to control each component.

Before using the remote for

the first time

Be sure to turn on the receiver and point the

remote towards the receiver when performing

the following procedure.

1Press RM SET UP.

The set up list appears.

2Move the easy scroll key to select

“AMP REGIST”, then press the key to

enter the selection.

The AMP REGIST list appears. When the

receiver name is already registered, it

appears on the second line.

3Move the easy scroll key to select

“START”, then press the key to enter

the selection.

After “SEARCHING” appears, the model

name appears. The remote is optimized for

the model. (For TA-DA9000ES, VIDEO4,

VIDEO5, and i.LINK are added in the input

list.) If the model name does not appear,

check the followings and start over from

step 1.

• The power is turned on.

• The remote is kept pointing toward the

receiver until the model name appears.

cIR SET

LEARNING

DOWNLOAD

INPUT LIST

< AMP REGIST >

? ? ?

cSTART

Exit

Location of parts and basic remote operations

masterpage:Right

filename[\\Nas-data-server\SONY Current jobs\SONY RM-

LJ312\DTP\4247235111\424723511RMLJ312U\GB03BSC_RM-LJ312-U.fm]

7GB

model name1[RM-LJ312]

[4-247-235-11(1)]

When you program the remote to control the following Sony or non-Sony components, you can use the

buttons on the remote that are marked with circles. Note, however, that some buttons may not operate

your component.

* Deck B only.

**Not available depending on the component.

Table of buttons used to control each component

Component

Button

VCR TV LD

player DVD

player Video

player

player MD deck Tape

deck

(A and

DAT

deck Tuner Cable

box Satellite

tuner Projector

AV ?/1 zzzzzzz z z z

H z zzzzzzz

X z zzzzzzz

x z zzzzzzz

./> z zzzzzz*z

m/M z zzzzzzz

Control button zz zz

TOP MENU/

GUIDE zz

AV MENU zz zz

DISPLAY zzzzzzz z

EXIT z**

RETURN Ozzz

continued

masterpage:Left

filename[\\Nas-data-server\SONY Current jobs\SONY RM-

LJ312\DTP\4247235111\424723511RMLJ312U\GB03BSC_RM-LJ312-U.fm]

8GB

model name1[RM-LJ312]

[4-247-235-11(1)]

Table of SUB menu operations

Press the ibutton repeatedly to display a list of

operations (SUB menu) that the corresponding

buttons are not found on the remote. The

contents of the lists will vary according to the

currently selected component. The following

table shows the items in each list and the

function of each item.

“D.CS” and “BSD” are not available with this

receiver.

Component Item(s) Function

VCR CH + Selects preset

channels.

CH –

INPUT

SELECT Changes the input

mode of the VCR.

AUDIO Changes the sounds.

ANT TV/

VIDEO Selects the signal to

be output from the

antenna terminal of

the VCR (TV signal

or video signal).

SP/LP Selects the playback

speed.

REC Starts recording.

COUNTER/

REMAIN Displays the playing

or remaining time.

TV CH + Selects preset

channels.

CH –

MUTING Mutes the sound.

VOL + Raises the volume.

VOL – Lowers the volume.

JUMP Toggles between the

previous and current

channels.

TV/VIDEO Changes the input

mode of the TV.

MPX/DUAL Changes the audio

setting.

WIDE Selects the wide-

picture mode.a)

P IN P Activates the

picture-in picture

function.b)

POSITION Changes the position

of the small

picture.b)

SWAP Swaps the small and

large pictures.b)

SUB CH + Selects preset

channels for the

small picture.b)

SUB CH –

SLEEP Activates sleep

timer.

LD player SIDE Ac) Selects side A of the

disc.

SIDE Bc) Selects side B of the

disc.

PROGRAM Programs the tracks.

REPEAT Repeatscurrenttrack

or programmed

tracks.

Component Item(s) Function

Location of parts and basic remote operations

masterpage:Right

filename[\\Nas-data-server\SONY Current jobs\SONY RM-

LJ312\DTP\4247235111\424723511RMLJ312U\GB03BSC_RM-LJ312-U.fm]

9GB

model name1[RM-LJ312]

[4-247-235-11(1)]

DVD player AUDIO Changes the sounds.

ANGLE Changes the angles.

SUBTITLE Changes the Subtitle

Language.

SUBTITLE

ON OFF Turns the Subtitles

on or off.

TIME Changes the time

information.

MODE Changes the search

mode.

CLEAR Returns to the

Continuous Play etc.

INDEX + Selects a index.

INDEX –

DISC SKIP + Selects a disc.

DISC SKIP –

SET UP Displays the Set up

menu. For details on

the menu operation,

see page 10.

Video CD

player DISC SKIP + Selects a disc.

DISC SKIP –

TIME Changes the time

information.

INDEX + Selects a index.

INDEX –

DISC Selects a disc.

CD Player DISC Selects a disc.d)

TRACK Selects a track.

CONTINUE Selects Continuous

Play.

SHUFFLE Selects Shuffle Play.

PROGRAM Selects Program

Play.

REPEAT Selects Repeat Play.

TIME Changes the time

information.

DISC SKIP + Selects a disc.

DISC SKIP –

Component Item(s) Function

MD deck DISC SKIP + Selects a disc.

DISC SKIP –

TIME Changes the time

information.

CONTINUE Selects Continuous

Play.

SHUFFLE Selects Shuffle Play.

PROGRAM Selects Program

Play.

REPEAT Selects Repeat Play.

MENU/NO Selects editing

operation or cancels

editing.

YES Performs editing

operation.

CLEAR Erases a track in the

program etc.

REC Pauses for recording.

Tape deck REVERSE

PLAY Plays the reverse

side.

A-REC Makes deck A pause

for recording.

B-REC Makes deck B pause

for recording.

PROGRAM/

START Selects Program

Play.

DAT deck REPEAT Starts Repeat Play.

CLEAR Erases a track in the

program etc.

REC Pauses for recording.

Tuner PRESET + Selects a preset

station.

PRESET –

DIRECT

TUNING Enters DirectTuning

mode.

FM/AM Selects the FM or

AM band.

SHIFT Switches the

memory page.

Cable box

Component Item(s) Function

continued

masterpage:Left

filename[\\Nas-data-server\SONY Current jobs\SONY RM-

LJ312\DTP\4247235111\424723511RMLJ312U\GB03BSC_RM-LJ312-U.fm]

10GB

model name1[RM-LJ312]

[4-247-235-11(1)]

a) Only with Sony TVs that supports the wide-picture

mode.

b) Only with Sony TVs with the picture-in-picture

function.

c) “DISC A/B” appears for non-Sony LD players.

d) Only with the Sony CD changer.

Note

If you have programmed the remote to control non-

Sony components, note the following:

– All the items may not appear when you select a

component.

– All the items displayed may not function.

Tip

You can freely assign codes to SUB1 through SUB5.

Select when you transmit learned codes. For details,

see “Learning the commands of your components” on

page 20.

To perform set up menu

operations on the DVD player or

satellite tuner

1Select the DVD player from the input list.

2Press the ibutton repeatedly to display the

SUB menu.

3Use the control button to perform menu

operations on the DVD player.

Make sure that “DVD” is selected in the

CURSOR TYPE list.

To exit the menu operation, press RETURN O/

EXIT. To display the DVD menu, use the AV

MENU button (page 4).

Satellite

tuner (DSS) CH + Selects preset

channels.

CH –

JUMP Toggles between the

previous and current

channels.

FAVORITE Displays the

Favorite Station

Guides.

CATEGORY Displays the Guide

Category list.

INDEX Displays the Station

Index.

Satellite

tuner (BST) CH + Selects preset

channels.

CH –

-/-- Selects the channel

of eleven or higher.

MAIN/SUB Switchedthemain or

sub language.

TV/RADIO Switches the TV or

radio input.

Projector POWER ON Turns on the

projector.

POWER OFF Turns off the

projector.

INPUT A Switches to the input

from INPUT A

jacks.

INPUT B Switches to the input

from INPUT B jacks.

INPUT

VIDEO Switches to the input

from VIDEO jacks.

INPUT

SELECT Switches to the input

from VIDEO IN or S

VIDEO IN jacks.

MEMORY Stores the adjusted

data in memory.

BRIGHT + Adjusts the

brightness.

BRIGHT –

CONTRAST + Adjusts the contrast.

CONTRAST –

ZOOM + Adjusts the zoom of

the picture.

ZOOM –

SHIFT + Adjusts the lens shift

of the picture.

SHIFT –

FOCUS + Adjusts the lens shift

of the picture.

FOCUS –

Component Item(s) Function

To display Do this

TOP MENU Press TOP MENU button.

DVD MENU Press AV MENU button.

SET UP Select “SET UP” in the SUB

menu.

Table des matières

Autres manuels Sony Télécommande

Sony

Sony RM-V401 Manuel utilisateur

Sony

Sony RM-95 Manuel utilisateur

Sony

Sony RM-V8A Manuel utilisateur

Sony

Sony RM-X5S Manuel utilisateur

Sony

Sony RM-S1AM Manuel utilisateur

Sony

Sony RM-V302 Manuel utilisateur

Sony

Sony RM-VL700T Guide de l'administrateur

Sony

Sony RM-V701 Manuel utilisateur

Sony

Sony RM-X7BT Manuel utilisateur

Sony

Sony RM-BR300 - Remote Control Unit Manuel utilisateur

Sony

Sony RM-IP500 Manuel utilisateur

Sony

Sony RM-C950 Manuel utilisateur

Sony

Sony RM-LJ301 Manuel utilisateur

Sony

Sony RM-KZ1 Manuel utilisateur

Sony

Sony RM-717 Manuel utilisateur

Sony

Sony RM-NX7000 Navitus Manuel utilisateur

Sony

Sony RM-AV2500T Manuel utilisateur

Sony

Sony RM-VL610A (RM-VL610A Remote Commander®) Guide de l'administrateur

Sony

Sony RM-AV3100 - Integrated Remote Commander Manuel utilisateur

Sony

Sony RM-V12 Mode d’emploi

Sony

Sony RM-VJ1 Manuel utilisateur

Sony

Sony RM-KZ1 Operating Instructions and Manufacturers Code... Manuel utilisateur

Sony

Sony RM-AV3000T Manuel utilisateur

Sony

Sony PlayStation Portal Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation