Sony STR-DH770 Manuel utilisateur

MULTI CHANNEL AV RECEIVER STR-DH770

Parts and Controls

Receiver

Front panel (upper section) [1]

Front panel (lower section) [2]

Power indicator [3]

Indicators on the display panel [4]

Rear panel [5]

Remote control

Remote control (upper section) [6]

Remote control (lower section) [7]

Preparation

1. Installing speakers

Names and functions of speakers [8]

Installing 5.1-channel speaker system [9]

Installing 7.1-channel speaker system using surround back speakers [10]

Installing 7.1-channel speaker system using front high speakers [11]

Installing 5.1-channel speaker system with bi-amplifier connection [12]

Installing 5.1-channel speaker system with front B speaker connection [13]

Speaker configuration and speaker pattern settings [14]

2. Connecting speakers

Connecting 5.1-channel speaker system [15]

Connecting 7.1-channel speaker system using surround back speakers [16]

Connecting 7.1-channel speaker system using front high speakers [17]

Connecting 5.1-channel speaker system with bi-amplifier connection [18]

Connecting 5.1-channel speaker system with front B speaker connection [19]

3. Connecting a TV

Connecting a TV [20]

Connecting a 4K TV [21]

Notes on connecting cables [22]

About HDMI connections [23]

4. Connecting audio-visual devices and the antennas (aerials)

Connecting devices with HDMI jacks [24]

Connecting devices with jacks other than HDMI jacks [25]

Connecting a USB device [26]

Connecting the antenna (aerial) [27]

Digital audio formats supported by the receiver [28]

Notes on connecting cables [29]

About HDMI connections [30]

5. Turning on the receiver/preparing the remote control

Inserting batteries into the remote control [31]

Turning on the receiver [32]

6. Setting up the receiver using Easy Setup

Setting up the receiver using Easy Setup [33]

Selecting the language [34]

Assigning the surround back speaker terminals (Surround Back Speakers Assign)

[35]

Performing Auto Calibration

1. About Auto Calibration [36]

2. Before you perform Auto Calibration [37]

3. Connecting the calibration microphone [38]

4. Selecting the front speakers [39]

5. Performing Auto Calibration [40]

6. Checking Auto Calibration results [41]

Enjoying Video and Sound

Playing AV devices

Enjoying video and sound [42]

Using the menu on the TV screen [43]

Enjoying video/sound from the connected device [44]

Enjoying sound of an ARC (Audio Return Channel) compatible TV [45]

Watching HDCP 2.2 copyright-protected content [46]

Playing content from an iPhone/iPod

Enjoying audio content using the BLUETOOTH function (Pairing operation) [47]

Compatible iPhone/iPod models [48]

Playing content from a USB device

Enjoying audio content stored on a USB device [49]

USB specifications and compatible USB devices [50]

Notes on USB devices [51]

Listening to the radio

Listening to FM radio [52]

Presetting FM radio stations [53]

Naming preset stations (NAME IN) [54]

Tuning to a station directly [55]

Receiving RDS broadcasts (for European and Asia-Pacific models only) [56]

Enjoying sound effects

Selecting a sound field [57]

Relations between sound fields and speaker outputs [58]

Resetting sound fields to the default settings [59]

Enjoying clear sound at a low volume level (NIGHT MODE) [60]

Adjusting the equalizer (EQ) [61]

Enjoying high-fidelity sound (Pure Direct) [62]

Using BLUETOOTH Features

About BLUETOOTH Features

What you can do with BLUETOOTH features [63]

Enjoying audio content stored on a BLUETOOTH device

Turning the BLUETOOTH function on/off (BT POWER) [64]

Enjoying audio content stored on a BLUETOOTH device with a one-touch

connection (NFC) [65]

Enjoying audio content using the BLUETOOTH function (Pairing operation) [66]

Controlling a BLUETOOTH device using the remote control [67]

Compatible BLUETOOTH version and profiles [68]

Using SongPal to control the receiver from a smartphone or tablet device

Controlling the receiver using a smartphone or tablet device (SongPal) [69]

Using Other Features

Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync)

What is “BRAVIA” Sync? [70]

Preparing to use the “BRAVIA” Sync function [71]

Turning off the receiver and connected devices simultaneously with the TV

(System Power Off function) (STBY LINK) [72]

Enjoying TV sound from the speakers connected to the receiver (System Audio

Control function) [73]

Enjoying an input source from a connected device immediately (One-Touch Play

function) [74]

Selecting the optimum picture quality and sound field automatically (Scene Select

function) [75]

About Home Theatre Control function [76]

Operating the receiver menu using the TV remote control (Remote Easy Control

function) [77]

Echo Canceling function [78]

About Language Follow function [79]

Enjoying video and sound with your desired way of use

Switching between digital and analog audio (INPUT MODE) [80]

Using other audio input jacks (A. ASSIGN) [81]

Using the sleep timer

Using the sleep timer [82]

Checking information on the receiver

Viewing information on the display panel [83]

Adjusting Settings

Using the menu on the display panel

Operating the receiver with the menu on the display panel [84]

Viewing information on the display panel [85]

Easy Setup

Setting up the receiver using Easy Setup [86]

Selecting the language [87]

Assigning the surround back speaker terminals (Surround Back Speakers Assign)

[88]

Performing Auto Calibration

1. About Auto Calibration [89]

2. Before you perform Auto Calibration [90]

3. Connecting the calibration microphone [91]

4. Selecting the front speakers [92]

5. Performing Auto Calibration [93]

6. Checking Auto Calibration results [94]

Selecting the Auto Calibration type (CAL TYPE) [95]

Level Settings

Outputting a test tone from each speaker (TEST TONE) [96]

Adjusting the speaker level (Level) [97]

Speaker Settings

Selecting the speaker pattern (SP PATTERN) [98]

Assigning the surround back speaker terminals (Surround Back Speakers Assign)

[99]

Adjusting the speaker size (Size) [100]

Adjusting the speaker distance (Distance) [101]

Setting the crossover frequency of the speakers (Crossover Freq) [102]

Selecting the unit of measurement (DIST. UNIT) [103]

Input Settings

Switching between digital and analog audio (INPUT MODE) [104]

Changing the name for each input (NAME IN) [105]

Using other audio input jacks (A. ASSIGN) [106]

Surround Settings

Selecting the HD-D.C.S. effect type (HD-D.C.S. TYP) [107]

Equalizer Settings

Adjusting the equalizer (EQ) [108]

Tuner Settings

Setting the FM station receiving mode (FM MODE) [109]

Naming preset stations (NAME IN) [110]

Audio Settings

Enjoying clear sound at a low volume level (NIGHT MODE) [111]

Synchronizing audio with video output (A/V SYNC) [112]

Adjusting the volume automatically (AUTO VOL) [113]

Selecting the language of digital broadcasts (DUAL MONO) [114]

Compressing the dynamic range (D. RANGE) [115]

HDMI Settings

Controlling HDMI devices (CTRL HDMI) [116]

Turning off the receiver and connected devices simultaneously with the TV

(System Power Off function) (STBY LINK) [117]

Enjoying content of a connected device without turning on the receiver (STBY

THRU) [118]

Setting the HDMI audio signal output of connected devices (AUDIO OUT) [119]

Setting the level of the subwoofer (SW LEVEL) [120]

Setting HDMI signal format (SIGNAL FMT.) [121]

Bluetooth Settings

Setting the Bluetooth Standby mode (BT STANDBY) [122]

Setting BLUETOOTH audio codecs (BT AAC) [123]

Turning the BLUETOOTH function on/off (BT POWER) [124]

System Settings

Setting standby mode (AUTO STBY) [125]

Reverting to the factory default settings

Reverting to the factory default settings [126]

Troubleshooting

Error messages

PROTECTOR [127]

List of messages after Auto Calibration measurements [128]

USB message list [129]

General

The receiver is turned off automatically. [130]

Cannot find an available input when connecting several digital devices. [131]

The receiver does not turn on even when the TV is turned on. [132]

The receiver turns off when the TV is turned off. [133]

The receiver does not turn off even when the TV is turned off. [134]

Image

No image appears on the TV screen. [135]

No 3D content appears on the TV screen. [136]

No 4K content appears on the TV screen. [137]

No image is output from the TV screen when the receiver is in standby mode.

[138]

The home menu does not appear on the TV screen. [139]

The display panel is turned off. [140]

Image does not appear on the TV screen when the receiver is not turned on. [141]

When the language for the on-screen display of the TV is changed, the on-screen

display language of the receiver is changed simultaneously. [142]

Sound

No sound or only a very low level of sound is heard, no matter which device is

selected. [143]

There is severe humming or noise. [144]

No sound or only a very low level of sound is heard from specific speakers. [145]

There is no sound from a specific device. [146]

There is no sound from the TV via the HDMI TV OUT (ARC) jack when using the

Audio Return Channel function. [147]

The left and right sound is unbalanced or reversed. [148]

Dolby Digital or DTS multi-channel sound is not reproduced. [149]

The surround effect cannot be obtained. [150]

A test tone is not output from the speakers. [151]

A test tone is output from a different speaker than the speaker displayed on the

display panel. [152]

No sound is output from the TV when the receiver is in standby mode. [153]

No TV sound is output from the receiver. [154]

Image and sound are not output from the TV when the receiver is not turned on.

[155]

The sound is output from both the receiver and the TV. [156]

Tuner

The FM reception is poor. [157]

The FM stereo reception is poor. [158]

You cannot tune to radio stations. [159]

RDS does not work (for European and Asia-Pacific models only). [160]

The RDS information that you want does not appear (for European and Asia-

Pacific models only). [161]

iPhone/iPod

The sound is distorted. [162]

USB devices

Are you using a compatible USB device? [163]

There is noise, skipping, or distorted sound. [164]

A USB device is not recognized. [165]

Playback does not start. [166]

A USB device cannot be connected to the USB port. [167]

Erroneous display. [168]

[READING] is displayed for an extended time, or it takes a long time before

playback starts. [169]

An audio file cannot be played. [170]

BLUETOOTH device

Pairing cannot be done. [171]

Cannot make a BLUETOOTH connection. [172]

The sound skips or fluctuates, or the connection is lost. [173]

The sound of your BLUETOOTH device cannot be heard on the receiver. [174]

Severe humming or noise. [175]

SongPal application is closed. [176]

“BRAVIA” Sync (Control for HDMI)

The Control for HDMI function does not work properly. [177]

TV sound cannot be heard from the speakers connected to the receiver. [178]

Remote control

The remote control does not function. [179]

If the problem is not solved

Reverting to the factory default settings [180]

Resetting sound fields to the default settings [181]

Customer support websites [182]

Other Information

Trademarks

Trademarks [183]

[1] Parts and Controls Receiver

Front panel (upper section)

[2] Parts and Controls Receiver

Front panel (lower section)

[3] Parts and Controls Receiver

Power indicator

(power)

1. Power indicator

2. SPEAKERS

3. TUNING MODE, TUNING +/–

Press to operate the FM tuner.

Press TUNING +/– to scan a station.

NFC sensor

5. 2CH/MULTI , MOVIE, MUSIC

6. Display panel

7. NIGHT MODE

Activates the Night Mode function which allows you to retain a theater-like environment at

low volume levels.

CONNECTION PAIRING BLUETOOTH

Operates the BLUETOOTH function.

DISPLAY

Displays information on the display panel.

10.

DIMMER

Adjusts the brightness of the display panel in 3 levels.

11.

Remote control sensor

Receives signals from remote control.

12.

PURE DIRECT

The indicator above the button lights up when the Pure Direct function is activated.

13.

PHONES jack

Connect headphones here.

CALIBRATION MIC jack

2. (USB) port

3. INPUT SELECTOR

4. MASTER VOLUME

Green: The receiver is turned on.

Amber: The receiver is in standby mode, and you have set one of the following:

[CTRL HDMI] is set to [CTRL ON].

[STBY THRU] is set to [ON] or [AUTO].

[BT STANDBY] is set to [STBY ON]. (*)

Indicator turns off when the receiver is in standby mode and:

[CTRL HDMI] is set to [CTRL OFF].

[STBY THRU] is set to [OFF].

[BT STANDBY] is set to [STBY OFF].

[4] Parts and Controls Receiver

Indicators on the display panel

When [BT STANDBY] is activated, the indicator only lights in amber when a device has been paired with the

receiver. If there are no devices paired with the receiver, the indicator turns off.

USB

Lights up when a USB device is detected.

Input indicator

Lights up to indicate the current input.

ARC

TV input is selected and Audio Return Channel (ARC) signals are detected.

OPT

Digital signals are input through the OPTICAL jack.

COAX

Digital signals are input through the COAXIAL jack.

HDMI

Digital signals are input through the selected HDMI IN jack.

MEM

Lights up when FM memory function is activated.

D.R.C.

Lights up when dynamic range compression is activated.

TrueHD (*)

Lights up when the receiver is decoding the Dolby TrueHD format signals.

Lights up when the receiver performs Dolby Pro Logic processing. This matrix surround

decoding technology can enhance input signals.

Lights up when the equalizer is activated.

DTS-HD (*)

Lights up when the receiver is decoding the DTS-HD format signals.

Lights up when the receiver tunes to a FM stereo broadcast.

D.C.A.C.

Lights up when the measurement results of the Auto Calibration function are applied.

10.

Note

[ PL] (6) may not light up depending on the speaker pattern setting.

[5] Parts and Controls Receiver

Rear panel

[6] Parts and Controls Remote control

Remote control (upper section)

Use the supplied remote control to operate this receiver.

SLEEP

Lights up when the sleep timer is activated.

11.

Lights up when a BLUETOOTH device is connected. Flashes while pairing and connecting.

12.

Speaker system indicator

13. When playing a Dolby Digital or DTS format disc, make sure that you have completed the digital connections and

[<INPUT>] - [INPUT MODE] is not set to [ANALOG] on the display panel.

HDMI IN/OUT jacks (*1) (*2)

1. SPEAKERS terminals

2. SUBWOOFER OUT jacks

3. AUDIO IN jacks

4. VIDEO IN/MONITOR OUT jacks (*1)

5. FM ANTENNA terminal

6. COAXIAL IN jack

7. OPTICAL IN jack

8. Connect a TV to the corresponding output jacks to watch video input from these jacks. For details, see

“Connecting a TV.”

Input jack Output jack

HDMI IN HDMI TV OUT

VIDEO IN MONITOR OUT

HDCP 2.2 is newly enhanced copyright protection technology that is used to protect content such as 4K movies.

Autres manuels pour STR-DH770

Table des matières

Autres manuels Sony Récepteur

Sony

Sony HCD-541 Primary Manuel utilisateur

Sony

Sony TA-E9000ES - Stereo Preamplifier Manuel utilisateur

Sony

Sony STR-DA5600ES - Multi Channel Av Receiver Manuel du propriétaire

Sony

Sony STR-DE885 Manuel utilisateur

Sony

Sony SAT-B2/2 Manuel utilisateur

Sony

Sony STR-DA3400ES Manuel utilisateur

Sony

Sony STR-KS1000 Manuel utilisateur

Sony

Sony STR-DE197 Manuel utilisateur

Sony

Sony STR-DA3100ES - Fm Stereo/fm-am Receiver Manuel utilisateur

Sony

Sony DWR-R01D Manuel utilisateur

Sony

Sony icf 2010 Manuel utilisateur

Sony

Sony HCD-SLK1i - Dvd Receiver Manuel utilisateur

Sony

Sony PlayStation PULSE 3D Manuel utilisateur

Sony

Sony STR-DE485 Manuel du propriétaire

Sony

Sony STR-DA3600ES - Multi Channel Av Receiver Manuel utilisateur

Sony

Sony STR-DA3700ES Manuel utilisateur

Sony

Sony STR-SL7 - Fm Stereo/fm-am Receiver Guide de l'utilisateur

Sony

Sony SAT-A55 RM-Y802 Guide de l'utilisateur

Sony

Sony HCD-SR4W Manuel utilisateur

Sony

Sony STR-DN860 Guide de l'utilisateur

Sony

Sony SAT-A50 - Digital Satellite System Manuel utilisateur

Sony

Sony STR-DB895D Guide de démarrage rapide

Sony

Sony STR-KS2000 - Blu-ray Dvd Receiver Component Manuel utilisateur

Sony

Sony STR-DE875 Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur