Sony CDP-CX235 - Mega Changer Manuel utilisateur

4-226-586-22 (1)

2000 Sony Corporation

CDP-CX235

Compact Disc

Player

Operating Instructions

Mode d'emploi

Manual de Instrucciones

Bruksanvisning

2GB

WARNING

To prevent fire or shock

hazard, do not expose

the unit to rain or

moisture.

To avoid electrical shock,

do not open the cabinet.

Refer servicing to

qualified personnel only.

Do not install the

appliance in a confined

space, such as a bookcase

or built-in cabinet.

Welcome!

Thank you for purchasing the Sony

Compact Disc Player. Before operating

the unit, please read this manual

thoroughly and retain it for future

reference.

About This Manual

The instructions in this manual are for

model CDP-CX235.

Conventions

• Instructions in this manual describe

the controls on the player.

You can also use the controls on the

remote if they have the same or similar

names as those on the player.

• The following icons are used in this

manual:

Indicates that you can do the

task using the remote.

Indicates hints and tips for

making the task easier.

For the customers in Canada

CAUTION

TO PREVENT ELECTRIC SHOCK,

DO NOT USE THIS POLARIZED AC

PLUG WITH AN EXTENSION

CORD, RECEPTACLE OR OTHER

OUTLET UNLESS THE BLADES

CAN BE FULLY INSERTED TO

PREVENT BLADE EXPOSURE.

This appliance is classified as a CLASS 1

LASER product.

The CLASS 1 LASER PRODUCT

MARKING is located on the rear

exterior.

The laser component in this product

is capable of emitting radiation

exceeding the limit for Class 1.

This equipment is intended for home

entertainment purposes only. The

warranty shall be invalidated if used

in commercial environments, such as

by disc jockeys, etc., even within the

Warranty Period.

WARNING

To prevent shock hazard, do not insert

the plug cut off from the mains lead into

a socket outlet. This plug cannot be used

and should be destroyed.

Don’t throw a battery,

dispose it as the

injurious wastes.

3GB

TABLE OF CONTENTS

Getting Started

Unpacking............................................................................................................................ 4

Hooking Up the System ..................................................................................................... 4

Inserting CDs ....................................................................................................................... 6

Playing a CD ............................................................................................................................ 8

Playing CDs

Using the Display ............................................................................................................. 10

Locating a Specific Disc ................................................................................................... 11

Specifying the Next Disc to Play .................................................................................... 13

Locating a Specific Track or a Point in a Track ............................................................ 13

Playing Repeatedly ........................................................................................................... 14

Playing in Random Order (Shuffle Play) ...................................................................... 14

Creating Your Own Program (Program Play) .............................................................. 15

Storing Information About CDs (Custom Files)

What You Can Do With the Custom Files .................................................................... 18

Labeling Discs (Disc Memo)............................................................................................ 18

Storing Specific Tracks (Delete Bank) ............................................................................ 21

Grouping Discs (Group File)........................................................................................... 21

Additional Information

Precautions ........................................................................................................................ 24

Notes on CDs ..................................................................................................................... 24

Troubleshooting ................................................................................................................ 25

Specifications ..................................................................................................................... 25

Index .......................................................................................................................................... 26

Getting Started

4GB

Getting Started

Hooking Up the System

Overview

This section describes how to hook up the CD player to

an amplifier. Be sure to turn off the power of each

component before making the connections.

Unpacking

Check that you received the following items:

•Audio cord (1)

•Monaural (2P) mini-plug cord (1) (Connecting cord

for CONTROL A1 ) (supplied for Canadian models

only)

•Remote commander (remote) (1)

•R6 (size AA) batteries (2)

Inserting batteries into the remote

You can control the player using the supplied remote.

Insert two size R6 (size AA) batteries by matching the

+ and –on the batteries to the diagram inside the

battery compartment.

Insert the negative (–) end first, then push in and down

until the positive (+) end clicks into position.

When using the remote, point it at the remote sensor g

on the player.

What cords will I need?

Audio cord (1) (supplied)

White

(L)

Red

(R)

White

(L)

Red

(R)

When to replace batteries

With normal use, the batteries should last for about six

months. When the remote no longer operates the player,

replace all the batteries with new ones.

Notes

•Do not leave the remote near an extremely hot or humid

place.

•Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

•Do not expose the remote sensor to direct sunlight or

lighting apparatuses. Doing so may cause a malfunction.

•If you do not use the remote for an extended period of time,

remove the batteries to avoid possible damage from battery

leakage and corrosion.

CD player

DIGITAL OUT

(OPTICAL)

COMMAND

MODECONTROL A1

Amplifier

To ANALOG OUT (R)

To an AC outlet

: Signal flow

To audio input

To an AC outlet

To ANALOG OUT

(L)

Playing CDsGetting Started

Getting Started

5GB

ANALOG OUT

INPUT

Hookups

When connecting the audio cord, be sure to match the

color-coded cord to the appropriate jacks on the

components: Red (right) to Red and White (left) to

White. Be sure to make connections firmly to avoid

hum and noise.

CD player Amplifier

• If you have a digital component such as a digital

amplifier, D/A converter, DAT or MD

Connect the component via the DIGITAL OUT (OPTICAL)

connector using an optical cable (not supplied). Take off the

cap and plug in the optical cable.

POC-15

Optical cable (not supplied)

CD player Digital component

Note

When you connect via the DIGITAL OUT (OPTICAL)

connector, noise may occur when you play CD software

other than music, such as a CD-ROM.

If you have a Sony component with the CONTROL

A1 jack

Connect the component via the CONTROL A1 jack.

You can simplify the operation of audio systems

composed of separate Sony components. For details, refer

to the supplementary “CONTROL A1 Control System”

instructions.

When using another Sony CD player together with

this player

You can make the supplied remote effective only for this

player.

•When using the player equipped with the

COMMAND MODE selector:

Set the COMMAND MODE selector of this player to

CD 1 and that of another player to CD 2 or CD 3. Then

set the CD 1/2/3 switch on the remote supplied for

each player accordingly.

•When using the player not equipped with the

COMMAND MODE selector:

The command mode of the player without the

COMMAND MODE selector is set to CD 1. Set the

COMMAND MODE selector of this player to CD 2,

and set the CD 1/2/3 switch on the remote to CD 2.

Setting the voltage selector (voltage

selector equipped models only)

Check that the voltage selector on the rear panel of the

player is set to the local power line voltage. If not, set

the selector to the correct position using a screwdriver

before connecting the AC power cord to a wall outlet.

Connecting the AC power cord

Connect the AC power cord to a wall outlet.

Note on placement

Be sure to place the player on a horizontal place.

If the player is slanted, it may cause malfunction or

damage the player.

220 - 240 V110 - 120 V

DIGITAL OUT

OPTICAL

DIGITAL INPUT

OPTICAL

Getting Started

6GB

Inserting CDs

You can insert up to 200 discs into this player.

I/u§OPEN/CLOSE JOG

1Press I/uto turn on the player.

2Open the front cover by pressing §OPEN/

CLOSE.

Rotary table

Loading position

Playing position

Disc slot at the loading position

Disc number

The disc number at the loading position appears in

the display. If the disc has the Disc Memo (see

page 18), the Disc Memo appears instead of the

disc number. As you turn the JOG dial, the disc

number or the Disc Memo changes.

Disc number or the Disc Memo

You can classify discs into eight groups by using

the Group File function. This feature lets you easily

find the disc you want to play. For details, see

“Grouping Discs”on page 21.

ALL

*DISC-20*

DISCS

CD1

DISC

3Turn the JOG dial until you find the disc slot

where you want to insert a disc, while checking the

disc number (written beside every slot and also

indicated in the display).

Playing CDsGetting Started

Getting Started

7GB

The rotary table turns and the disc slot at the

loading position is set to the playing position.

Always close the front cover except when you

insert or remove discs.

5Repeat Steps 3 and 4 to insert more discs.

6Close the front cover by pressing §OPEN/

CLOSE.

With the label side

facing right

After inserting the disc, you can input the original

disc titles instead of the disc numbers (see

“Labeling Discs”on page 18) to locate it easily

when you start playing.

4Insert a disc with the label side facing right.

ALL DISCS

CD1

DISC

SONYHITS

Notes

•Do not insert an empty 8 cm (3-inch) CD adaptor (CSA-8). It

may damage the player.

• Do not attach anything such as seals or sleeves to CDs. It

may damage the player or the disc.

•If you drop a disc into the player and the CD won’t go

into the slot correctly, consult your nearest Sony dealer.

•When transporting the player, remove all discs from the

player.

•Make sure you have inserted the disc into each slot at a

right angle to the rotary table. If the disc is not put in

straight, it may damage the player or the disc.

•Make sure the rotary table comes to a complete stop

before inserting or removing discs.

The front panel closes automatically when you press

·. Be careful not to put your hand into the player after

pressing ·otherwise your hand may be caught in the

front panel.

Removing CDs

After following Steps 1 to 3 of “Inserting CDs”on page

6, remove the discs. Then close the front cover.

Basic Operations

8GB

Playing a CD

•See pages 4 –5 for the hookup

information.

•Make sure you have inserted the

discs correctly as indicated on

pages 6 –7.

•You can play all the tracks on a

disc in the original order

(Continuous Play). You can also

play up to 200 discs

consecutively.

You can turn on the player

by pressing I/uon the

remote Z

Turn on the amplifier and select the CD player position.

Press I/uto turn on the player.

Press CONTINUE to select ALL DISCS or 1 DISC Continuous

Play mode.

Each time you press CONTINUE, “ALL DISCS”or “1 DISC”

appears in the display.

When you select

ALL DISCS

1 DISC

The player plays

All discs in the player consecutively in the order of

disc number. Empty disc slots are skipped.

Only one disc you have selected

Turn the JOG dial until the disc number or the Disc Memo (see

page 18) you want appears in the display to select the first disc

(ALL DISCS) or the disc you want (1 DISC).

4/5

ALL DISCS

CD1

DISC

*DISC-20*

STANDBY

I/ u

CONTINUE

GROUP 1

GROUP 5

SHUFFLE

GROUP 2

GROUP 6

PROGRAM

GROUP 3

GROUP 7

REPEAT

GROUP 4

GROUP 8

TIME/TEXT

GROUP FILE

MEMO SEARCH

INPUT

DISC/CHARACTER

PUSH ENTER

OPEN/CLOSE

AMS

CHECK CLEAR

Basic Operations

9GB

5Push the JOG dial or press ·to start playing.

The selected disc is set to the playing position, and the player

plays all the discs from the selected one (ALL DISCS) or all the

tracks once (1 DISC).

Adjust the volume on the amplifier.

To stop playback

Press p.

When you turn off the player

The player remembers the

last playing disc and the

play mode (Continuous,

Shuffle (see page 14) or

Program (see page 15)).

When you turn on the

player again, therefore, the

player plays the same disc in

the same play mode.

§OPEN/CLOSE

≠/±

·P p

Pause

Resume playing after pause

Go to the next disc

Go back to the preceding disc

Go to the next track

Go back to the preceding track

Stop playing and remove the disc

You need to

Press P

Press Por ·

Press DISC SKIP + once.

Hold down the button to skip discs.

Press DISC SKIP –once.

Hold down the button to skip discs.

Press ±

Press ≠

Press §OPEN/CLOSE

JOG

STANDBY

CONTINUE

GROUP 1

GROUP 5

SHUFFLE

GROUP 2

GROUP 6

PROGRAM

GROUP 3

GROUP 7

REPEAT

GROUP 4

GROUP 8

TIME/TEXT

GROUP FILE

MEMO SEARCH

INPUT

DISC/CHARACTER

PUSH ENTER

OPEN/CLOSE

AMS

CHECK CLEAR

Playing CDs

10GB

Playing CDs

Using the Display

You can check information about the disc using the

display.

JOG

TIME/TEXT

Checking the total number and playing

time of the tracks

Select the disc you want to check, and press

TIME/TEXT.

The display shows the current disc number, total

number of tracks, and total playing time of the disc.

When you want to check another disc Z

Press DISC SKIP on the remote in the stop mode to select

the disc you want to check. The total number of tracks

and the total playing time of the selected disc appear for

a while.

Current disc number

Total number of tracks Total playing time

Display information while playing a disc

While playing a disc, the display shows the current disc

number, track number, playing time of the track and

the next disc number.

Current disc number Next disc number

Current track number Playing time of the track

TIME/TEXT

HIGH-LIGHT

ALL DISCS

CD TEXT

CD1

DISC

SONYHITS

ALL DISCS

CD1

DISC

TRACK

MIN

SEC

20 10 60.48

ALL DISCS

DISC

CD1

DISC

TRACK

MIN

SEC

20 1 0.28

Checking the information of CD TEXT discs

CD TEXT discs have information, such as the disc titles

or artist names, memorized in a blank space on the

discs where, on normal discs, there is no information.

The display shows the CD TEXT information of the

disc so that you can check the current disc title, artist

name and track title. When the player detects CD TEXT

discs, the “CD TEXT”indication appears in the

display. If your CD TEXT disc has multi language

capacity, “MULTI CD TEXT”indication appears in the

display. If you want to check the information in

another language, refer to “Selecting the language of

the CD TEXT information”on page 11.

Display information before you start playing

The display shows the disc title. When you press

TIME/TEXT, the artist name scrolls in the display. If

you press TIME/TEXT again, the display shows the

current disc number, total number of tracks and total

playing time of the disc momentarily. Then the display

shows the disc title again.

INPUT

Autres manuels pour CDP-CX235 - Mega Changer

Table des matières

Langues :

Autres manuels Sony Lecteur CD

Sony

Sony DVP-FX730 - Portable Dvd Player Manuel utilisateur

Sony

Sony CFD-460 Manuel utilisateur

Sony

Sony CDX-GT560 Manuel utilisateur

Sony

Sony SCD-XB940 Manuel utilisateur

Sony

Sony CFD-E95 - Cd Radio Cassette-corder Manuel utilisateur

Sony

Sony Sports D-FS18 Manuel utilisateur

Sony

Sony Walkman D-F415 Manuel utilisateur

Sony

Sony DVP-FX825 Manuel utilisateur

Sony

Sony CDP-CX230 - Compact Disc Changer Manuel utilisateur

Sony

Sony CFD-6 Manuel utilisateur

Sony

Sony MZ-B3 - MD Walkman MiniDisc Recorder Manuel utilisateur

Sony

Sony CDX-601 - Compact Disc Changer System Manuel utilisateur

Sony

Sony CDP-CE575 - Disc Carousel Manuel utilisateur

Sony

Sony CDX-GT25MPW Guide produit

Sony

Sony CDX-L450 Manuel utilisateur

Sony

Sony CDX-C4750 - Fm/am Compact Disc Player Manuel utilisateur

Sony

Sony CFD-S20CP - Cd Radio Cassette-corder Manuel utilisateur

Sony

Sony Discman D-F411 Manuel utilisateur

Sony

Sony Walkman D-E885 Manuel utilisateur

Sony

Sony SCD-XA5400ES - Es Super Audio Cd Player Manuel utilisateur

Sony

Sony CDX-R550 Manuel utilisateur

Sony

Sony CDP-CE245 - Compact Disc Player Manuel utilisateur

Sony

Sony CDX CDX-GT210 Guide produit

Sony

Sony CD Walkman D-EJ855 Manuel utilisateur

Manuels Lecteur CD populaires d'autres marques

RCA

RCA RP-7923 Manuel utilisateur

Pioneer

Pioneer DEH-P3550MP XM Manuel utilisateur

Philips

Philips AZ1207 Manuel utilisateur

Philips

Philips CD582 Manuel utilisateur

Philips

Philips AZ 6821 Manuel utilisateur

Lasonic

Lasonic MSU-2020 Manuel utilisateur

THOMSON

THOMSON RCD150 Manuel utilisateur

Denon

Denon DCD-1420 Manuel utilisateur

Panasonic

Panasonic SJ-MR100 Manuel utilisateur

Onkyo

Onkyo DX-7210 Manuel utilisateur

Denon

Denon DVM-4800 Manuel utilisateur

JBL

JBL MR-32 Manuel utilisateur

RCA

RCA RCD152 Manuel utilisateur

Technics

Technics SL-PS770A Manuel utilisateur

Clarion

Clarion compact disc Manuel utilisateur

Philips

Philips Expanium AZ 1538 Manuel utilisateur

Rotel

Rotel RCD 975 Manuel utilisateur

Pioneer

Pioneer CLD-D790 Manuel utilisateur