Sony Ericsson HBH-30 Manuel utilisateur

Rev R1g1

How to pair my Bluetooth™ Headset/Handsfree HBH-30/-35/-60/-65/-200/-300/-600/-602/-608/-610/

-660/-662 with a P910

Pairing, sometimes called bonding/adding, two devices with each other mean that both devices will work together when

switched on and within range. Pairing is done once and normally there is no need to repeat this procedure.

Please follow the description below. Note that the description for preparing your phone is found at the end.

HBH-30/-35/-60/-65 (NOT the HBH-200)

1. Make sure that the headset is fully charged, switched on and within 1 m (3 ft) of the phone.

2. Press the CALL HANDLING BUTTON for approximately 5 seconds until your hear a long high frequent beep and

the light flashes red and green. The headset is now in “Pairing mode”.

3. Prepare the phone according to the description below.

HBH-200 (The handsfree does not support full functionality with the P910.)

1. Make sure that the handsfree is fully charged, switched on and within 1 m (3ft) of the phone.

2. Enter the menu in the HBH-200 by pressing the ON/OFF BUTTON and the CALL BUTTON (the round button on

the side) at the same time quickly.

4. Use the (+) or the (-) button, and scroll to ADVANCED and press the CALL BUTTON to confirm.

5. Select NEW PHONE and press the CALL BUTTON.

6. In the HBH-200 display, READY TO ADD – PREPARE PHONE appears.

7. Prepare the phone according to the description below.

HBH-300/-600/-602/-608/-610

1. Make sure that the headset is fully charged, switched on and within 1 m (3 ft) of the phone.

2. The first time you turn your headset on, it immediately goes into pairing mode. The light flashes red and green. If

so, please proceed to the phone instructions below.

3. To manually prepare the headset, press the VOLUME BUTTONS, (+) and (-), at the same time for

approximately 5 seconds until your hear a long high frequent beep and the light flashes red and green. The headset

is now in “Pairing mode”.

Rev R1g2

HBH-660/-662

1. Make sure that the headset is fully charged, switched on and within 1 m (3 ft) of the phone.

2. The first time you turn your headset on, it immediately goes into pairing mode.

There are three symbols showing in the headset display: a headset, two rotating arrows and a phone.

Proceed to phone instructions below.

3. To manually prepare the headset in paring mode, press the VOLUME BUTTONS, (+) and (-), at the same time for

approximately 5 seconds, until your hear a long high frequent beep. There are three symbols showing the headset

display: a headset, two rotating arrows and a phone. The headset is now in “Pairing mode”.

P910

1. In the Application view, tap on CONTROL PANEL, CONNECTIONS tab, BLUETOOTH.

2. Tap the SETTINGS tab and set Bluetooth to ON.

3. Select the DEVICES tab and press ADD.

4. The phone starts searching for Bluetooth devices. Make sure that the headset is in pairing mode

5. When the HBH-xxx becomes visible in the AVAILABLE DEVICES menu, tap it.

6. Enter the PASSKEY (0000 by default) and press DONE. On the screen, BONDING COMPLETED appears.

7. Tap DONE and HBH-xxx is added to the list of Bluetooth devices and is ready to use.

Autres manuels pour HBH-30

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sony Ericsson casque

Sony Ericsson

Sony Ericsson HBH-610a Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-PV720 Manuel utilisateur

Sony Ericsson

Sony Ericsson MW600 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-DS980 Manuel utilisateur

Sony Ericsson

Sony Ericsson Akono HBH-608 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-30 Manuel utilisateur

Sony Ericsson

Sony Ericsson Akono HBH-660 Manuel utilisateur

Sony Ericsson

Sony Ericsson VH410 Manuel de service

Sony Ericsson

Sony Ericsson Akono HBH-660 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-IV835 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-DS200 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-60 Manuel utilisateur

Sony Ericsson

Sony Ericsson VH700 Manuel de service

Sony Ericsson

Sony Ericsson HBH-GV435 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-PV702 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-DS970 Manuel utilisateur

Sony Ericsson

Sony Ericsson HCA-20 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-610a Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-PV720 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-GV435a Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-DS970 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-PV710 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-PV700 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-PV712 Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur