Sonus SBC 1000 Series Manuel utilisateur

Sonus –Network Design Group

SBC 1000/2000 Series Configuration Guide

with

Lync 2013 for ThinkTel SIP Trunk

Deployments

Application Notes v1.0

P/N XXX-XXXXX SBC1000

Last Updated: April 24, 2015

Sonus –Network Design Group 2 of 35

1Document Overview......................................................................... 4

1.1 Overview ............................................................................................................................4

2Introduction ...................................................................................... 5

2.1 Audience ............................................................................................................................5

2.2 Requirements.....................................................................................................................5

2.3 Reference Configuration .....................................................................................................6

Network Topology ...........................................................................................................6

3Configuring Sonus SBC 1000 and SBC 2000 Series...................... 7

3.1 SBC Configuration Diagram................................................................................................7

3.2 External Peer Side SBC Configuration................................................................................7

Node Interfaces...............................................................................................................7

SIP profile .....................................................................................................................10

Media Profile.................................................................................................................11

Signaling Groups...........................................................................................................14

Call Routing Table.........................................................................................................15

Transformation Tables...................................................................................................16

3.3 Internal Side SBC Configuration........................................................................................17

Node Interfaces.............................................................................................................17

SIP Profile.....................................................................................................................19

Media Profiles ...............................................................................................................20

Signaling Group.............................................................................................................22

Sip Server Table............................................................................................................23

Call Routing Table.........................................................................................................24

Transformation Tables...................................................................................................25

4Lync Server 2013 Configuration .................................................... 26

4.1 Lync 2013 Configuration Settings......................................................................................26

Adding the SBC to the Lync Server................................................................................26

Adding the SBC to the Lync Server 2013 Routing..........................................................30

5SBC and Lync 2013 Specific Configurations................................ 32

5.1 Initial Setup for All Calls....................................................................................................32

Calling number manipulation .........................................................................................32

Called number...............................................................................................................32

5.2 Initiating Transfers with REFER.........................................................................................33

Call transfer using SIP REFER Method..........................................................................33

Sonus –Network Design Group 3 of 35

5.3 Initiating Transfers with Re-INVITE....................................................................................34

Call transfer using Re-Invite method..............................................................................34

5.4 Call Hold...........................................................................................................................34

Call Hold using RFC3264..............................................................................................34

5.5 Media System Configuration .............................................................................................34

6Exceptions......................................................................................35

6.1 Lync 2013 Exceptions.......................................................................................................35

302 Moved Temporarily.................................................................................................35

6.2 SBC1000 Exceptions........................................................................................................35

Fax V.34........................................................................................................................35

Sonus –Network Design Group 4 of 35

1 Document Overview

This Application Note describes the configuration steps required for the Sonus Session Border Controller (SBC)

1000 and SBC 2000 to interoperate with the Lync 2013 system and a SIP trunk group to PSTN.

The objective of this document is to describe the configuration procedures performed during interoperability

testing of SBC 1000 and SBC 2000 with Lync 2013 Server over SIP trunk to PSTN.

For additional information on Sonus SBC 1000 and SBC 2000 series, visit http://www.sonus.net

For additional information on Lync 2013, visit http://www.microsoft.com

1.1 Overview

The Sonus SBC 1000 and SBC 2000 Session Border Controllers are designed to use the same application

software, boot image, and Survivable Branch Appliance software. The SBCs differ in the number of physical

Ethernet connections and processing power, but otherwise are viewed from a software standpoint as identical.

The reference configuration described in the following sections was tested with an SBC 1000, but is fully

applicable to an SBC 2000.

Sonus –Network Design Group 5 of 35

2 Introduction

This document provides configuration guidance for the Sonus SBC (Session Border Controller) 1000 Series

when connecting to a SIP trunk group and a MS Lync 2013.

The Sonus SBC 1000 and SBC 2000 are Session Border Controllers which connect disparate SIP trunks, SIP

PBXs, and communication applications within an enterprise. The SBC can also be used as a SIP routing and

integration engine.

The Sonus SBC is the point of connection between the SIP trunk group to PSTN and the Lync 2013.

2.1 Audience

This technical document is intended for telecommunication engineers for the purpose of configuring the Sonus

SBC 1000 and SBC 2000, along with aspects of the SIP trunk group coupled with the Lync 2013 product. There

are steps that require navigating third-party and Sonus SBC Graphical User Interface (GUI). Understanding the

basic concepts of IP, routing, and SIP/RTP are necessary to complete the configuration or troubleshooting, if

necessary.

This configuration guide is offered as a convenient reference for Sonus customers. The product specifications

and information contained in this guide are subject to change without notice. All statements, information, and

recommendations in this guide are believed to be accurate, but are presented without warranty of any kind,

express or implied, and are provided “AS IS”. Users must take full responsibility for the application of the

specifications and information in this guide.

Technical support on SBC 1000 and SBC 2000 can be obtained through the following:

Phone: +1 888-391-3434 (Toll-free) or +1 978-614-8589 (Direct)

Web: http://www.sonus.net/company/maintenance/log-trouble-tickets

2.2 Requirements

The following equipment and software was used for the sample configuration provided:

Sonus Equipment

Type

Version

SBC 1000

4.1 Build 369

3rd Party Equipment

Type

Version

Microsoft Lync 2013

Mediation Server

5.0.8308.420

Sonus –Network Design Group

2.3 Reference Configuration

The simulated enterprise site consists of a Lync 2013 and a SIP trunk group to PSTN connected over the SBC

1000. The SBC 1000 was running software version 4.1, Build 369 during testing.

Network Topology

Lync 2013

Sonus

SBC 1000

ThinkTel

Internal IP Network

Figure 1: Network Topology

The figure above shows the equipment used for the integration and certification testing. The SBC 1000 is used to

route and facilitate calls between the PSTN and the Lync 2013 system.

The SBC 1000 under test has 2 Ethernet ports configured. The SBC 2000 can have up to 4 physical Ethernet

ports. For more information on Media port deployment options, refer to the SBC 1000 Network Deployment

Guide. Contact your local Sales team for further information or other network connectivity queries with the

Sonus Network Design professional services offerings.

Sonus –Network Design Group

3 Configuring Sonus SBC 1000 and SBC 2000 Series

The SBC 1000 and SBC 2000 share a common code base and user interface. In this example, we are using an

SBC 1000.

3.1 SBC Configuration Diagram

Lync 2013 Signaling Group

Internal

Lync 2013

External

Signaling Group: To/From MS Lync 2013

Call Routing: To Lync 2013

Signaling Group: To/From ThinkTel

Call Routing: To PSTN

10.35.180.136:5060

SIP over TCP

ThinkTel

10.35.177.226:5060 208.68.17.52:5060

216.110.2.235:5060

SIP over UDP

Figure 2: SBC 1000 SIP Trunk Diagram

3.2 External Peer Side SBC Configuration

Node Interfaces

The Sonus SBC 1000 allows you to configure the Identification information, Physical Data Layer, and Networking

Layer for the Ethernet ports. If you want to change the IP address, you must configure the associated Logical

Interface or use the Modify Ethernet IP task found under the Tasks tab.

Sonus –Network Design Group

The following sections contain figures that show settings for the Ethernet connection between the Sonus SBC

1000 and Public internet.

Node Ports

Figure 3 External Port

Sonus –Network Design Group 9 of 35

Node Interfaces

Figure 4 Logical Interface

Sonus –Network Design Group 10 of 35

SIP profile

SIP Profiles control how the Sonus SBC 1000/2000 communicates with SIP devices, and control important

characteristics such as: session timers, SIP header customization, SIP timers, MIME payloads, and option tags.

Shown below is the default SIP profile used for the SBC 1000 in this test.

Figure 5: SIP profile

Ce manuel convient aux modèles suivants

Table des matières

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur