SonicWALL TZ 150 Wireless Manuel utilisateur

SonicWALL TZ 150

Getting Started Guide

SonicWALL TZ 150 Getting Started Guide Page 1

SonicWALL TZ 150 Security Appliance

Getting Started Guide

The SonicWALL®TZ 150 is a total security platform delivering true

layered security by integrating gateway anti-virus, intrusion

prevention and content filtering capabilities for small networks in an

easy-to-use, low cost platform.

When combined with the SonicWALL Gateway Anti-Virus/Intrusion

Prevention Service subscription, the TZ 150 delivers real-time

network security protection against viruses, worms, Trojans, spyware

programs, peer-to-peer and instant messaging applications, and

other malicious code.

This Getting Started Guide provides instructions for basic installation

and configuration of the SonicWALL TZ 150. After you complete this

guide, up to 10 computers on your Local Area Network (LAN) will

have secure Internet access.

Note: For complete documentation, refer to the SonicWALL SonicOS

Standard 3.0 Administrator’s Guide on the SonicWALL Resource CD

or at: <http://www.sonicwall.com/services/documentation.html>.

Before You Begin

Check Package Contents

• One SonicWALL TZ 150 security appliance

• One SonicWALL TZ 150 Getting Started Guide

• One SonicOS Standard 3.0 Release Notes

• One Ethernet cable

• One 12V, 1.66A power supply

• One SonicWALL Resource CD, which contains product

documentation and software utilities.

Any Items Missing?

If any items are missing from your package, contact:

SonicWALL Support

Web: <http://www.sonicwall.com/support/>

E-mail: [email protected]

Page 2

SonicWALL TZ 150 Configuration Steps

“Collect Required Information” on page 2

“Applying Power to the SonicWALL TZ 150” on page 4

“Connecting the SonicWALL TZ 150” on page 4

“Accessing the Management Interface” on page 5

“Using the SonicWALL Setup Wizard” on page 7

“Registering Your SonicWALL TZ 150” on page 10

What You Need to Begin

• A computer to use as a management station for initial

configuration of the SonicWALL TZ 150

• An Internet connection

• A Web browser for accessing the SonicWALL TZ 150’s Web-

based management interface. The Web browser must support

Java and HTTP uploads. Internet Explorer 5.0 or higher or

Netscape Navigator 4.7 or higher are recommended.

Collect Required Information

Internet Service Provider (ISP) Information

If You Have a Cable Modem

Your ISP is probably using DHCP to dynamically assign an

address to your computer.

You do not need any Internet connection information.

If You Have DSL

Your ISP is probably using PPPoE to dynamically authenticate

your login and assign an address to your computer. You will need:

User Name:

Note: Your ISP may require your user name to include the “@”

symbol and the domain name, for example, “Joe@sonicwall.com”

Password:

SonicWALL TZ 150 Getting Started Guide Page 3

If You Have a Static IP Address

Your ISP may have assigned you a static IP address for your

computer. If so, the paperwork or e-mail confirmation from your

ISP should contain the following configuration information:

IP Address:

Subnet Mask:

Default Gateway:

Primary DNS:

Secondary DNS (optional):

If Your ISP Provided You With a Server IP Address, User Name,

and Password

Your ISP may be using PPTP to establish a secure connection

between your computer and a server. You will need:

Server Address:

User Name:

Password:

If you are unsure what kind of connection you have, the paperwork or

e-mail confirmation message from your ISP should contain the

information. If you cannot find the information, contact your ISP. In

addition, the SonicWALL TZ 150 will automatically attempt to detect

the correct settings during setup.

Other Information

SonicWALL Management Interface

To access the SonicWALL TZ 150 Web-based management

interface. These are the default settings, which you can change:

User Name: admin

Password: password

Note:If you are not using one of the network configurations above,

refer to the SonicWALL SonicOS Standard 3.0 Administrator’s Guide

available on the SonicWALL Resource CD and on the Web at:

<http://www.sonicwall.com/services/documentation.html>.

Page 4

Applying Power to the

SonicWALL TZ 150

1. Plug the power supply into the SonicWALL TZ 150 and into an

appropriate power outlet.

The Power LED on the front panel lights up green when you

plug in the SonicWALL TZ 150. The Test LED lights up and

may blink while the appliance performs a series of diagnostic

tests. When the Test light is no longer lit, the SonicWALL TZ 150

is ready for configuration.

Connecting the SonicWALL TZ 150

Connecting the Ethernet Cables

1. Connect one end of an Ethernet cable to your Internet

connection, such as a DSL modem or cable modem.

This cable may already be connected between your computer

and your modem. If so, disconnect it from your computer, and

leave it connected to the internet.

Internet

Management

Station

LAN 1

WAN

DSL or Cable

Modem

SonicWALL TZ 150 Getting Started Guide Page 5

2. Connect the other end of the cable to the WAN port on the back

of your SonicWALL TZ 150.

The WAN LEDs on the front panel light up indicating an active

connection.

3. Connect one end of an Ethernet cable to the computer you are

using to manage the SonicWALL TZ 150.

4. Connect the other end of the cable to port # 1on the back of your

SonicWALL TZ 150.

The port # 1LEDs on the front panel light up indicating an active

connection.

Accessing the Management Interface

To access the Web-based management interface of the

SonicWALL TZ 150:

1. On the computer you have connected to port # 1, Start your Web

browser.

Alert: Turn off pop-up blocking software before accessing the

SonicWALL management interface.

Your Web browser must support Java and HTTP uploads.

Internet Explorer 5.0 or higher or Netscape Navigator 4.7 or

higher are recommended.

Page 6

2. Enter 192.168.168.168 in the Location or Address field.

3. The SonicWALL Setup Wizard launches and guides you

through the configuration and setup of your SonicWALL TZ 150.

If the SonicWALL Setup Wizard Does Not Appear

If you cannot connect to the SonicWALL TZ 150 or the Setup

Wizard does not display, verify the following configurations:

• Did you correctly enter the SonicWALL TZ 150 management

IP address in your Web browser?

• Is your computer running pop-up blocking software?

• Are the Local Area Connection settings on your computer set

to obtain an IP address dynamically (DHCP)? see Step 7,

“Connecting Computers to Your SonicWALL TZ 150” on

page 14 for instructions on changing your Local Area

Connection settings.

• Do you have the Ethernet cable connected to your computer

and to the LAN 1 port on your SonicWALL TZ 150?

• Some browsers may not launch the Setup Wizard

automatically. In this case, log into SonicWALL TZ 150 using

“Admin” as the user name and “password” as the password.

After you log in, click the Wizards button on the

System > Status page. Select Setup to begin configuring

your SonicWALL TZ 150.

SonicWALL TZ 150 Getting Started Guide Page 7

Using the SonicWALL Setup Wizard

The SonicWALL Setup Wizard provides user-guided instructions for

configuring your SonicWALL TZ 150.

Note: Make sure you have any required ISP information to complete

the configuration before using the Setup Wizard. See the list of

required information in Step 1, “Collect Required Information” on

page 2.

Tip: If you do not know what type of Internet connection you have,

contact your ISP. In addition, the SonicWALL Setup Wizard will

attempt to detect your connection settings. You will see what is

automatically selected in Step 3, WAN Network Mode

Configuring the SonicWALL TZ 150

Welcome - Click Next to begin.

1. Change Password - Change the administrative password. This

is the password for the admin account. Click Next.

Alert: Remember your password. You need it to access the

SonicWALL TZ 150 management interface after the initial

configuration.

2. Change Time Zone - Change the Time Zone setting to your

local time zone. Click Next.

Note: It is important that you set the time zone correctly before

you register your SonicWALL TZ 150.

3. WAN Network Mode - The Setup Wizard automatically detects

most networking modes. If it does not detect the networking

mode, you may have a Static IP Address. See Step 1, “Collect

Required Information” on page 2.

Confirm the selection or select the correct type of network

connection for your ISP.

• DHCP is commonly used with cable modems.

• PPPoE is commonly used with DSL modems.

Click on the yellow link for a networking type to see a definition.

Click Next.

Page 8

4. WAN Network Mode - The second WAN network mode screen

configures your WAN settings for the selection you made in the

previous page.

•Static - Enter the IP addressing information provided by your

ISP into the SonicWALL security appliance WAN IP Address,

WAN Subnet Mask, Gateway (Router) Address, and DNS

Server Address. Click Next.

•DHCP - You do not need to enter any WAN networking

settings. Click Next.

•PPPoE - Enter your user name and password from your ISP.

The username usually includes “@” and the domain name,

for example, joe.user@ispgateway.net. Click Next.

•PPTP - Enter the PPTP server IP address, your PPTP user

name, and password. Select if you want the WAN port of your

security appliance to obtain an IP address automatically from

the PPTP server, or if you want to use a specific address. If

you select Use the following IP Address, enter the WAN IP

address, WAN Subnet Mask, and the Gateway address.

Click Next.

5. LAN Settings - By default, your SonicWALL TZ 150 is configured

with a LAN network IP address, 192.168.168.168, and subnet

mask, 255.255.255.0, that will work well for most installations. In

most cases, leave the default LAN IP address unchanged.

Note: The LAN IP address is the address you will use to access

the SonicWALL TZ 150 management interface.

If you plan to have more than one Windows computer, Windows

Networking allows them to communicate with each other. If you

have only one Windows computer or have computers with other

operating systems, Windows Networking has no effect. Leave the

Enable Windows Networking Support box checked.

Click Next.

6. LAN DHCP Settings - The DHCP Server in the

SonicWALL TZ 150 will automatically distribute IP addressing

information to computers on your LAN. Leave the Enable DHCP

Server on LAN checkbox checked. The default LAN Address

Range works for most networks. Leave it unchanged. Click Next.

SonicWALL TZ 150 Getting Started Guide Page 9

7. SonicWALL Configuration Summary - Displays your network

configuration information.

Verify your settings. If you need to make changes, click the Back

button. If the configuration settings are correct, click Apply.

8. Setup Wizard Complete - Your SonicWALL TZ 150 is now

successfully configured for LAN and Internet access. Click

Restart to reboot your SonicWALL TZ 150 and complete the

configuration process.

9. Test your connection: After the SonicWALL TZ 150 reboots, open

a Web browser, and go to <http://www.sonicwall.com>

If you can view the SonicWALL home page, you have configured

everything correctly.

If you cannot view the SonicWALL home page try a second URL.

If you still cannot view a Web page, return to step 4, “Accessing

the Management Interface” on page 5, log in as “admin” with your

administrative password, and click on the Wizards button in the

top right corner of the management interface to restart the wizard.

Autres manuels pour TZ 150 Wireless

Table des matières

Autres manuels SonicWALL Porte

SonicWALL

SonicWALL PRO 2040 Manuel utilisateur

SonicWALL

SonicWALL SSL-VPN 2000 Manuel de service

SonicWALL

SonicWALL SL-VPN 4000 Comment utiliser

SonicWALL

SonicWALL Secure Mobile Access 6200 Manuel d'utilisation et d'entretien

SonicWALL

SonicWALL ex9000 Manuel d'installation et d'exploitation

SonicWALL

SonicWALL SSL-VPN 4000 Manuel utilisateur

SonicWALL

SonicWALL SRA EX9000 Manuel utilisateur

SonicWALL

SonicWALL TZ 150 Wireless Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur