2 Notes
SOLVIS SolvisMax Subject to technical changes 12.15 BAL-MAX-7-K-EN 5
2Notes
2.1 Safety Notes
CAUTION
Observe instructions
Solvis is not liable for any damage resulting from
non-observance of these instructions.
•Read the instructions carefully before operating
the system.
•Observe the safety notes.
DANGER
What to do if there is a risk of fire
•Immediately switch off the heating emergency
switch.
•Shut off the fuel supply.
•Have a suitable fire extinguisher ready.
CAUTION
Observe ambient conditions
Malfunction or failure of system possible.
•Avoid ambient temperatures outside of the per-
mitted range of 0°C to +50°C.
•Avoid dew condensation and an annual mean
relative humidity higher than 75>% (briefly 95%).
CAUTION
Check for damage
Damage to the controller, to cables or to connect-
ed pumps or valves may cause severe damage to
the system.
•Do not operate the system/unit if there is visible
damage to any of its components.
CAUTION
Avoid contaminants
•Water, oil, grease, solvent, dust, foreign bodies,
aggressive vapours and other contaminants must
be kept away from the system and the units.
•Cover the system and the units when performing
construction or other work in the area to protect
them from dirt and contaminants.
•Do not remove the protective foil on the unit
until immediately before startup.
CAUTION
Do not make any unauthorised modifications
Otherwise, there is no guarantee that the system
will function correctly.
•You must not make any changes to the compo-
nents of the unit.
•Only use original spare parts.
2.2 Use
Intended use
The units and components in this system are intended only
for heating and for hot water production with possible
solar support, as described in this document.
Operating this system for any other purpose is prohibited.
Exceptions require express written approval or statement
from Solvis in advance.
Exclusion of liability
Solvis accepts no responsibility for damage to the unit or
resulting damages if:
•installation and start-up have not been carried out by a
specialist company recognised by Solvis,
•the system is not being used as intended or is being
operated incorrectly,
•maintenance was not performed, or
•maintenance, modifications or repairs have been per-
formed on the heating system by someone who is not a
specialist.
Guarantee and warranty
We offer a warranty in accordance with our general terms
and conditions. On various components, we also offer
guarantees lasting several years.
Glossary
Certain terms are used in these instructions that have the
following meaning if not otherwise indicated:
•Standard value: Values stored in the controller at the
factory. They depend on the respective system configu-
rations. The menus in these instructions usually display
the standard values for the SolvisMax Gas; the values of
other systems are referred to separately.
•Internal heat generator: District heating, gas, or oil
burner in the SolvisMax heat exchanger insert.
•External heat generator: Gas or oil burner, solid fuel
boiler, or heating pump in an external boiler.
•Solid fuel boiler: Boilers that are fired with sold fuels,
such as wood. They can also be used as an additional
heat source.
