SOLTEK SL-67EV1 Manuel d'utilisation et d'entretien
This User’s Guide & Technical Reference is for assisting system
manufacturers and end-users in setting up and installing the
mainboard.
Every effort has been made to ensure that the information in this
manual is accurate. Solte Computer Inc. is not responsible for
printing or clerical errors. Information in this document is subject to
change without notice and does not represent a commitment on
the part of Solte Computer Inc.
No part of this manual may be reproduced, transmitted, translated
into any language in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose
without the express written permission of Solte Computer Inc.
Companies and products mentioned in this manual are for identifi-
cation purpose only. Product names appearing in this manual may
or may not be registered trademar s or copyrights of their respec-
tive companies.
Solte Computer Inc. Provides this manual “AS IS” without war-
ranty of any ind, either express or implied, including but not limited
to the implied warranties or conditions of merchantability or fitness
for a particular purpose. In no event shall Solte Computer Inc. Be
liable for any loss or profits, loss of business, loss of use or data,
interruption of business, or for indirect, special, incidental, or con-
sequential damages of any ind, even if Solte Computer Inc. Has
been advised of the possibility of such damages arising from any
defect or error in this manual or product.
© Copyright 2000 Soltek Computer Inc.
All rights reserved
Model : SL- 7EV1
Edition : April, 2000
Version : 2.0
http://www.solte .com.tw
e-mail: support@solte .com.tw
NOTICE TO END USER
7EV1
2
C O N T E N T
Chapter 1: Introduction .......................... 4
1-1 CPU .................................................................................... 4
1-2 CHIPSET ............................................................................ 4
1-3 L2 CACHE .......................................................................... 4
1-4 MAIN MEMORY .................................................................. 4
1-5 BIOS ................................................................................... 4
1- SUPER I/O FUNCTON ....................................................... 4
1-7 OTHER FEATURES ........................................................... 5
1-8 MOTHERBOARD LAYOUT ................................................
Chapter 2: Hardware Setup .................... 7
2-1 CPU TYPE CONFIGURATION ........................................... 7
2-2 SYSTEM MEMORY CONFIGURATION ............................. 8
2-3 JUMPER SETTINGS .......................................................... 8
2-4 CONNECTORS ................................................................ 11
2-4.1 J2 SWITCH SIGNAL SUMMARY .................................. 12
2-4.2 J3 SWITCH SIGNAL SUMMARY .................................. 13
Chapter 3: BIOS Setup.......................... 14
3-1 STANDARD CMOS SETUP ............................................. 15
3-2 BIOS FEATURES SETUP ................................................ 17
3-3 CHIPSET FEATURES SETUP ......................................... 21
3-4 POWER MANAGEMENT SETUP .................................... 24
3-5 PNP / PCI CONFIGURATION SETUP.............................. 28
3- LOAD SETUP DEFAULTS ............................................... 30
3-7 CPU SPEED SETTING..................................................... 31
3-8 INTEGRATED PERIPHERALS ........................................ 33
3-9 SUPERVISOR / USER PASSWORD ............................... 37
7EV1
3
3-10 HDD AUTO DETECTION ............................................... 38
3-11 SAVE & EXIT SETUP ..................................................... 38
3-12 EXIT WITHOUT SAVING................................................ 38
7EV1
4
Chapter 1: Introduction
1-1 CPU
• Supports Intel Celeron / Pentium II / Pentium !!! CPUs using SLOT-1 at
233MHz up to 1GHz or higher.
• Supports CPU voltage auto-detect circuit.
• Supports 66 / 100 / 103 / 112MHz Bus Cloc with auto-detect. (BIOS provides
75 / 83 / 103 / 112 / 133 / 150MHz Bus Cloc without auto-detect)
1-2 CHIPSET
• VIA VT82C693A + VT82C596B chipset with 133MHz FSB.
• PCI Rev 2.1, 5V, 33MHz interface compliant.
• Supports 66 / 100 / 133MHz, 3.3V AGP (Accelerated Graphics Port) slot.
1-3 L2 CACHE
• Pentium II / Pentium !!! supports 512K write bac cache with Pipelined
Burst SRAMs.
1-4 MAIN MEMORY
• Memory range from 8MB up to 768MB (SDRAM) with DRAM Table Free
configuration.
• Supports SDRAM with 12 / 10 / 8 / 6 ns speed.
• Supports 3pcs 168pin DIMM soc ets. (3.3V Unbuffered and 4 cloc type)
• DRAM supports ECC or Parity function.
1-5 BIOS
• Award Plug and Play BIOS.
• Supports ACPI and legacy APM.
• Flash Memory for easy upgrade.
1- SUPER I/O FUNCTON
• Integrated USB (Universal Serial Bus) controller with 2 USB ports.
• Supports 2 IDE channels with 4 IDE devices. (including ZIP / LS-120 devices)
• Provides PCI IDE Bus Master function and supports Ultra DMA33 / 66
function.
• Provides 1 floppy port.
• 2 high speed 16550A FIFO UART ports.
7EV1
5
• 1 parallel port with EPP / ECP / SPP capabilities.
• PS/2 mouse connector.
• Built-In RTC, CMOS, eyboard controller on single I/O chip.
• Peripherals boot function. (with ATX power)
1-7 OTHER FEATURES
• ATX size 17.0cm x 30.5cm.
• 5 PCI Master slots, 2 ISA slots and 1 AGP slot.
• Provides DIP switch setting.
• Supports 66 / 100 / 133MHz Bus Cloc .
• Supports eyboard power on function.
• Supports WOL (Wa e On LAN) function.
• BIOS supports 103 / 112 / 133 / 150MHz Bus Cloc .
7EV1
1-8 MOTHERBOARD LAYOUT
• DEFAULT SETTING: Celeron 300/66MHz, Pentium II / Pentium !!! 450/
100MHz.
NOTE: FOR 100 / 133MHz CPU ENVIRONMENT, THE SDRAM MUST COMPLY WITH PC-100 / PC-
133 SPEC.
1 3
JP3
JP4
3 1
3 1
JP2
3
1
JBAT1
3
1
JP
1
3
JP7
JVGA1
PFAN1
JWOL1
SFAN1
CFAN1
PCI 1
PCI 2
PCI 3
PCI 4
PCI 5
HDD/LED
SPK RESET KEYLOCK SUSLED
IR PWR/SW
IDE 2
IDE 1
FDD
DIMM 1
DIMM 2
DIMM 3
15
15
USB0
USB1 PS/2
MOUSE
PS/2
K/B
LPT1
COM2 COM1
AGP
Li
Battery
SLOT 1
ATX POWER
ISA 1
ISA 2
FLASH BIOS
SW1
ON DIP
1 2 3 4 5
VIA
93A
VIA
59 B
J2
J3
7EV1
7
Chapter 2: Hardware Setup
2-1 CPU TYPE CONFIGURATION
Celeron 2 / ( MHz * 4.0x)
Pentium II 400/100 (100MHz * 4.0x)
Pentium III 533B/133 (133MHz * 4.0x)
Pentium III 533EB/133 (133MHz * 4.0x)
OFF
OFF
ON
ON
ON
ON
ON
1 2 3 4 5 6
Celeron 300/ ( MHz * 4.5x)
Pentium II/III 450/100 (100MHz * 4.5x)
Pentium III 00B/133 (133MHz * 4.5x)
Pentium III 00EB/133 (133MHz * 4.5x)
OFF
OFF
OFF
ON
ON
ON
ON
1 2 3 4 5 6
Celeron 333/ ( MHz * 5.0x)
Pentium II/III 500/100 (100MHz * 5.0x)
Pentium III 500E/100 (100MHz * 5.0x)
Pentium III 7/133 (133MHz * 5.0x)
OFF
OFF
OFF
ON
ON
ON
ON
1 2 3 4 5 6
Celeron 3 / ( MHz * 5.5x)
Pentium II/III 550/100 (100MHz * 5.5x)
Pentium III 550E/100 (100MHz * 5.5x)
Pentium III 733/133 (133MHz * 5.5x)
OFF
OFF
OFF
OFF
ON
ON
ON
1 2 3 4 5 6
Celeron 400/ ( MHz * .0x)
Pentium II/III 00/100 (100MHz * .0x)
Pentium III 00E/100 (100MHz * .0x)
Pentium III 800EB/133 (133MHz * .0x)
OFF
OFF
ON
ON
ON
ON
ON
1 2 3 4 5 6
Celeron 433/ ( MHz * .5x)
Pentium II 50/100 (100MHz * .5x)
Pentium III 50/100 (100MHz * .5x)
OFF
OFF
OFF
ON
ON
ON
ON
1 2 3 4 5 6
Celeron 4 / ( MHz * 7.0x)
Pentium III 700/100 (100MHz * 7.0x)
OFF
OFF
OFF
ON
ON
ON
ON
1 2 3 4 5 6
Celeron 500/ ( MHz * 7.5x)
Pentium III 750/100 (100MHz * 7.5x)
Pentium III 1000B/133 (133MHz * 7.5x)
OFF
OFF
OFF
OFF
ON
ON
ON
1 2 3 4 5 6
Celeron 533/ ( MHz * 8.0x)
Pentium III 800/100 (100MHz * 8.0x)
OFF
OFF
OFF
ON
ON
ON
ON
1 2 3 4 5 6
Using these CPUs which bus ratio exceed
8.0x, user can not change all values from
the DIP switch but detection by BIOS
automatically.
Over 8.0x
Manual DIP switches for diverse CPUs
7EV1
8
2-2 SYSTEM MEMORY CONFIGURATION
• This VIA 693 Apollo Pro Plus motherboard supports 168pin DIMM of 4MB,
8MB, 16MB, 32MB, 64MB and 128MB to form a memory size between
8MB up to 768MB (SDRAM). VIA 693 Apollo Pro Plus chipset provides
“Table-Free” function. It means that users can install DRAM with any
configuration and in any ban , and that is why the DRAM table is not needed
but do remember that the DRAM must be 3.3V type. For 100 / 133MHz
CPU environment, the SDRAM specification must comply with PC-
100 / PC-133 spec.
2-3 JUMPER SETTINGS
CPU FAN
CFAN1/SFAN1/PFAN1: ONBOARD FAN (12V)
SFAN1
CFAN1
SYSTEM FAN
PFAN1
CHASSIS FAN
NOTE : • If he JP2 is fixed by jumperwire, hen he mo herboard doesn’ sup-
por keyboard power on func ion.
• When he keyboard power on func ion shows any compa ible problem,
choose Disabled and repor o he keyboard vendor/manufac urer.
• Keyboard power on func ion mus be se from he BIOS. Refer o he
“In egra ed and Peripherals” sec ion in he Chap er 3.
Disabled (default)
JP2: KEYBOARD POWER ON
1 3
JP2
Enabled 1 3
JP2
Redirect all USB ports to USB
connector (default)
JP3/JP4: USB PORT SELECT
1
3
1
3
JP3 JP4
Redirect USB1 to AGP port
1
3
1
3
JP3 JP4
7EV1
9
This jumper allows you o use he swi ch of ATX power supply o con rol ON/
OFF swi ch direc ly ins ead of using he power swi ch on he mo herboard.
Clear CMOS Data
Retain Data (default)
JBAT1: CLEAR CMOS DATA
3
1
JBAT1
3
1
JBAT1
Normal (default)
JVGA1: VGA Card
JVGA1
For PCI VGA card JVGA1
Connect the Wa e On LAN signal from LAN card
to JWOL1
JWOL1 : WAKE ON LAN (WOL) FUNCTION
JWOL1
This fea ure requires ha Wake-On-LAN fea ures are enabled and ha your sys-
em has an ATX power supply wi h a leas 720mA / +5V s andby power.
Enabled
Normal (default)
JP : POWER LOST RESUME
3
1
JP
3
1
JP
Auto Detect 66MHz/100MHz/
133MHz (default)
JP7: BUS CLOCK SELECT
1
3
JP7
133MHz
1
3
JP7
7EV1
10
BUS CLOCK SELECT
SW1 DIP1 ~ DIP4 SETTING
OFF
ON
ON
ON
ON
1 2 3 4 5 6
OFF
ON
3.0x
OFF
OFF
ON
ON
ON
1 2 3 4 5 6
OFF
ON
3.5x
OFF
ON
ON
ON
ON
1 2 3 4 5 6
OFF
ON
4.0x
OFF
OFF
ON
ON
ON
1 2 3 4 5 6
OFF
ON
4.5x
OFF
OFF
ON
ON
ON
1 2 3 4 5 6
OFF
ON
5.0x
OFF
OFF
OFF
ON
ON
1 2 3 4 5 6
OFF
ON
5.5x
OFF
ON
ON
ON
ON
1 2 3 4 5 6
OFF
ON
.0x
OFF
OFF
ON
ON
ON
1 2 3 4 5 6
OFF
ON
.5x
OFF
OFF
ON
ON
ON
1 2 3 4 5 6
OFF
ON
7.0x
OFF
OFF
OFF
ON
ON
1 2 3 4 5 6
OFF
ON
7.5x
OFF
OFF
ON
ON
ON
1 2 3 4 5 6
OFF
ON
8.0x
BUS RATIO SELECT
OFF
ON
1 2 3 4 5 6
OFF
ON
1 2 3 4 5 6
133MHz
OFF
OFF
ON
ON
1 2 3 4 5 6
66MHz
OFF
ON ON
ON
1 2 3 4 5 6
66/100/133MHz
Auto Select (default)
SW1 DIP5 ~ DIP SETTING JP7
1
3
1
3
100MHz
Table des matières
Autres manuels SOLTEK Carte mère
SOLTEK
SOLTEK SL-65DVB Manuel utilisateur
SOLTEK
SOLTEK SL-65MIE Manuel utilisateur
SOLTEK
SOLTEK SL-855GEI-FDGR Manuel utilisateur
SOLTEK
SOLTEK SL-55D5 Manuel d'utilisation et d'entretien
SOLTEK
SOLTEK KT400-R Manuel utilisateur
SOLTEK
SOLTEK SL-85MR2 Manuel utilisateur
SOLTEK
SOLTEK SL-67G60 Manuel d'utilisation et d'entretien
SOLTEK
SOLTEK SL-65F+ Manuel utilisateur
SOLTEK
SOLTEK SL-67EZ Manuel d'utilisation et d'entretien
SOLTEK
SOLTEK SL-54A2-S Manuel utilisateur
SOLTEK
SOLTEK SL-85MIR3 Manuel utilisateur
SOLTEK
SOLTEK SL-55F5 Manuel utilisateur
SOLTEK
SOLTEK SL-85DIV Manuel utilisateur
SOLTEK
SOLTEK 82440FX Manuel utilisateur
SOLTEK
SOLTEK SL-65MIV Manuel utilisateur
SOLTEK
SOLTEK SL-67FV1 Manuel utilisateur
SOLTEK
SOLTEK SL-865G3 Manuel utilisateur
SOLTEK
SOLTEK SL-85DRV3 Manuel utilisateur
SOLTEK
SOLTEK SL-75KAV Manuel utilisateur
SOLTEK
SOLTEK SL-56D1 Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
