7 | P a g e
with RSS-102 RF exposure, users can obtain Canadian in ormation on RF exposure and compliance.
Le dispositi rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la
con ormité à l'exposition de RSS-102 r , utilisateurs peut obtenir l'in ormation canadienne sur l'exposition et
la con ormité de r .
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance o 20 centimeters between the
radiator and your body.
Cet émetteur ne doit pas tre Co-placé ou ne onctionnant en même temps qu'aucune autre antenne ou
émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres
entre le radiateur et votre corps.
Class B Notice for Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est con orme à la norme NMB-003 du Canada.
3. For EU - CE compliance
This device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.
Note: Shielded Ethernet cable must be used in order to comply with emission limits.
4. Safety notice
a) This device is to be used with Certi ied Power adaptor with output rated at 5VDC, 2A. Power adapter
must meet Limited power source (LPS) requirements.
b) Power adapter must meet local sa ety standards and requirements based on product intended use.
c) Power adapter must meet Operating environment conditions as speci ied in section 4 above.
d) Maximum allowed current consumption o the device is 2A, including external USB devices (each can
consume up to 0.5A based on USB 2.0 standard.) As an open and con igurable plat orm, the user must
check any con iguration they build to not exceed the allowed current consumption limits.
e) This device does not ship with a battery. Sa ety testing was made without an RTC backup battery.
) Care ul testing and measurement o component temperature must be made when enclosing the
HummingBoard models with add-ons such as RTC battery, PCIe add-on, mSATA add-on or USB devices
connected to internal USB ports. RTC Backup Batteries ave critical safety parameters suc as
temperature range and current rating t at must NOT be exceeded. RTC circuit is included in igure 3
or re erence.
g) When installing RTC Backup battery, check or: Compatibility with NXP’s PCF8523 speci ications.
Positive pin o battery is connected to pin 1 o the RTC Backup Battery connector (see igure 2).
Battery’s actual worst case temperature and withdraw current meet battery speci ication.
h) Caution, Risk o explosion i battery is replaced by an incorrect type. Dispose o used batteries
according to the local regulations.
i)
Some sur aces o the device might reach high temperature when the device is under heavy work load.
See igure 2, page 3
5. Disposal
Follow local regulations regarding disposal o the product. Dispose o your product in accordance with local
regulations. In some areas, the disposal o these items in household or business trash may be prohibited.
Help us protect the environment - recycle!
COPYRIGHT NOTICE
Copyright © 2014 SolidRun ltd | All rights reserved
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
