SodaMagic Smart Manuel utilisateur

SodaMagic 'Smart'

Sparkling Water Machine

Instruction Manual

ENG

SodaMagic

Contact

SodaMagic

Room D, 7/F

Hollywood Centre

77-91 Queen's Road West

Sheung Wan

Hong Kong

Tel: (+852) 3727 9251

Fax: (+852) 2111 2464

E-mail: contact@sodamagic.hk

www.SodaMagic.hk

Content

Parts and Features

Install the CO2 Cylinder

How to Use

Care and Cleaning

Troubleshooting

Important Safeguards

Guarantee and Registration

Parts and Features

Thank you for using our product. To properly

understand how to use this product, please read

this instruction manual before use.

What your SodaMagic 'Smart' can do

The SodaMagic 'Smart' combines innovative

product design with the latest technology to deliver

one of the world's best compact soda makers.

Carbonate your tap water Before the first use

With the SodaMagic 'Smart' you can make

carbonated water, personalized to your taste, in the

comfort of your home.

Hand wash the water bottle in warm soapy water

and rinse. Wipe outside with a soft cloth to dry.

Never wash the water bottle in dishwasher. Harsh

chemicals will damage the water bottle.

The SodaMagic 'Smart' kit

Fizz Infuser

PET Water Bottle Sparkling Water Machine CO2 Cylinder

Scope of Delivery:

The quantity and design of the accessories may differ depending on the Special Offer being promoted.

Install the CO2 Cylinder

Note:

Only use SodaMagic CO2 cylinder and water

bottles. Never carbonate if the water bottle is

empty, not completely filled or not fully inserted.

1) 2)

Remove the back cover.

Remove seal and twist off the cap

from the CO2 cylinder.

3) 4)

To install the CO2 cylinder, place a kitchen towel or

soft cloth on the countertop to protect from

scratching.

Insert threaded part of the CO2 cylinder into the

unit receptacle and hand-tighten.

Put back the back cover.

How to Use

1) 2)

Remove the Fizz Infuser and the water bottle

by pulling the water bottle forward and then sliding it off the unit.

3) 4)

Remove the Fizz Infuser from the water bottle by

turning it counter-clockwise and then pulling it up.

Fill water bottle with VERY COLD water to the

MAX fill line.

Only use pulpless beverages like alcohols and

pulp free juices.

WARNING! Pulped beverages may clog the

pressure release valve.

How to Use

5) 6)

Attach the Fizz Infuser onto the water bottle and turn clockwise

and slide the Fizz Infuser fully into the unit adapter and tilt the water bottle to a straight vertical position.

7) 8)

Press carbonating button to begin carbonation.

Push 2-3 times the carbonating button then stop

when you hear a hissing sound.

Carbonation can be made stronger or lighter by

pressing for more or less time.

Remove the Fizz Infuser and the water bottle

by pulling the water bottle forward and then sliding

it off the unit.

How to Use

9) 10)

Remove the Fizz Infuser and the water bottle

by pulling the water bottle forward and then sliding

it off the unit.

Open the slow release valve on the Fizz Infuser

and pay attention to foam levels as pressure

releases. If the foam reaches the top of the bottle

close the slow release valve and wait for the foam

to settle before opening again. If the foam reaches

the top too quickly next time shorten your

carbonation pushes.

11) 12)

If the slow release valve is open and the sound of

air coming out stops, press the blue fast release

button to make sure pressure is fully released.

Remove the Fizz Infuser by unscrewing it counter-

clockwise.

13)

Enjoy your sparkling beverage!

Cap and refrigerate the water bottle to preserve the

carbonation of the water.

Care and Cleaning

•Rinse the water bottle with clean water

after each use.

•The water bottle should not be cleaned in

the dishwasher.

•The water temperature shall not be higher

than +40° C (+120° F). Use mild detergent

only.

•Clean the water bottle carefully and

periodically.

•If you do not intend to use the water bottle

any time soon, leave the water bottle open,

letting the inside dry out completely.

To clean the carbonating unit, wipe with a damp

cloth. Do not immerse the carbonating unit in water.

Do not use any solvents or abrasive cleaners, since

this could damage the surface.

Make sure to wash Fizz Infuser after each use

under running water. The Fizz Infuser allows you

to carbonate non-water beverages because it can

both slowly release pressure and can be easily

cleaned. This is especially important if foam came

out of the valve during use.

Care and Cleaning

WARNING!!!

Damaged water bottles can fail during carbonation.

Hand wash with soap and warm water. Never place

the water bottle in dishwasher. Never use brushes,

abrasives, or chemical cleaners. Replace water

bottle if it is scratched, deformed or beyond the

expiration date.

Tips for best results

Use the coldest water possible.

Table des matières

Autres manuels SodaMagic Machine à soda

SodaMagic

SodaMagic Bubble Manuel utilisateur

Manuels Machine à soda populaires d'autres marques

Soda Trend

Soda Trend P00268 Manuel utilisateur

LIFEPLUS

LIFEPLUS ST02-P0-B0 Manuel utilisateur

Happy Frizz

Happy Frizz MIO BLANC Manuel utilisateur

Sudaba

Sudaba Mini Soda Maker Manuel utilisateur

LINDR

LINDR SODA EXCLUSIVE GREEN LINE Manuel utilisateur

Arzum

Arzum BUBBLE TOUCH Manuel utilisateur

Haws

Haws 30-SSM202185 Manuel utilisateur

eta

eta 0638 Manuel utilisateur

Summary

Summary AS200200000232 Manuel utilisateur

Stadler Form

Stadler Form HUGO Manuel utilisateur

OBH Nordica

OBH Nordica SodaMaster Gazelle 6511 Manuel utilisateur

sodaboss

sodaboss 9401FE Manuel utilisateur

Soda Trend

Soda Trend STG-200 Manuel utilisateur

SodaStream

SodaStream Art Manuel utilisateur

Hamilton Beach

Hamilton Beach Fizzini Manuel utilisateur

Hans Grohe

Hans Grohe Aqittura M91 SodaBase Manuel utilisateur

DrinkMate

DrinkMate DM-SPR-420 Manuel utilisateur

Philips

Philips GoZero ADD4902 Manuel utilisateur