Miscellaneous
Gimbal calibration
Failure analysis
Other extended features
Specications
Safety information
Disclaimer
Other related products
Built-in 2.4G wireless module
There’s a built-in 2.4G wireless module, which enables wireless remote
control by optional accessory“ Snoppa Handle”.
For keeping the best using experience, please keep rmware up to date.
The upgrade operation can be easily performed by connecting the
gimbal to a pc through micro USB cable. Please visit website
“www.snoppa.com” to download the latest version of rmware and get
more info on how to upgrade.
It’s a normal phenomenon that the gimbal will vibrate if there’s no
counterweight (camera) mounted.
When you mount the camera into the camera holder on the gimbal, the
vibration will go o.
As the built-in gyro sensor is temperature sensitive, which sometimes
causes the gimbal camera unbalanced. Calibration is needed if the gimbal
camera is not horizontal after starting up.
Calibration steps:
1. Turn on the gimbal and press the P button to enter the sleep mode.
2. Lay down the gimbal on a table and keep it still, press P button quickly
for 4 times, the gimbal will sound“ Di Di” and start the auto calibration
process immediately.
3. After about 8 seconds,
if the calibration succeed, the gimbal will sound“ Di Di Di”, then will be
turned o automatically.
if the calibration fails, the gimbal will sound“Di—, Di—, Di—, Di—, Di— ”,
and retrieve the last calibration result.
Snoppa Go is a kind of shooting stabilizer, and it’s forbidden to use for
any illegal purpose. The user is responsible for all the behavior of
purchase and use of the product.
We will not provide service to products purchased via non-authorized
channels and dealers, and our company reserve the right to revise the
content of user’s manual without any notice.
The content of this manual may be modied in later version due to
rmware update in the future.
Please visit our website to get more info and download the latest
version of user guide and rmware when needed.
1. Don’t use the gimbal near chemical plant, gas
station or explosive materials.
2. Don’t dismantle or ret gimbal without permission.
3. Don’t place Gimbal into moisture or in water.
4. Don’t place Gimbal where children can reach.
5.Take notice of surroundings when using in order to
avoid accident.
6. Don’t put any heavy things on the gimbal.
TF card slot
There’s a spare TF card storage slot on the top of the gimbal camera
holder, which can store your spare tiny TF card temporarily in case it lost.
Snoppa HANDLE
Please visit our website for more products and accessories.
More gimbal related products and accessories will
be released one after another soon......
© 2015 Snoppa Technology. All Rights Reserved.
If you have any question about this document,
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BETTERIES ACCORDING
TO THE INSTRUCTIONS
Charging input voltage
Charging input current
Tilt axis mechanical movement range
Roll axis mechanical movement range
Pan axis mechanical movement range
Pan axis mechanical movement range
Working temperature
Battery model
Battery capacity
Weight
Length
Width
Height
Item Specs Memo
Handhold horizontally
Handhold vertically
Li-Po
-10℃~ 60℃
4.5v ~ 5.5V
1.0A
330°
76°
120°
330°
18650
3400mA
295g
256mm
96mm
85mm
Exclude battery and
camera
Placed horizontally
Placed horizontally
Placed horizontally
----
----
----
----
----
----
Firmware upgrade
Gimbal vibration
Supply power to GoPro Hero 3/3+/4
It would be troublesome if the battery of GoPro runs out unexpectedly.
Snoppa Go is able to supply power to GoPro Hero camera, and this
function needs to be activated manually:
1. Make sure the provided GoPro connector is
connected.
2. Press P button quickly for 3 times, the gimbal
will sound “Di, Di, Di”, and the power supply to
GoPro is turned on.
Turn o power supply: press P button quickly for 3 times again, the
gimbal will sound “Di—, Di—”, or directly turn o the gimbal.
P.S: GoPro consumes lots of battery, thus battery life of Snoppa Go will
be reduced, if power supply is activated to GoPro.
It is recommended to be activated only under urgent circumstances.
GoPro connector
wireless remote control for Snoppa gimbal stabilizer series
the vehicle-mounted gimbal stabilizer
Snoppa CAVALRY
Failure Possible issue Solution
Failure to switch on power
