Snoppa M1 Manuel utilisateur
Snoppa M1
Quick Start Guide _ 1
Schnellstartanleitung _ 9
Guide de démarrage rapide _17
Guía de Uso Rápido _ 25
Краткое руководство _ 33
Guida Rapida _ 41
便 利 な 利 用ガイドライン _ 49
빠른시작 가이드 _ 57
快速入門指南 _ 65
快速入门指南 _ 73
V1.1 2017.03
ACKNOWLEDGEMENT
[8]
[9]
[2]
[7]
[6]
[3]
[4]
[5]
[1]
Thanks for choosing Snoppa M1 handheld 3-axis motorized
gimbal, which is mainly designed for smartphones.
With the Snoppa’s advanced 3-axis stabilizing technology and
innovative structure design, it can precisely detect the
smartphone’s position and control the built-in brushless motors
to compensate for natural arm movements, balancing the
smartphone and eliminate video shake.
[1] PAN Motor
[2] TILT Motor
[3] Counterweight
[4] ROLL Motor
[5] 1/4 screw mount
[6] Foldable mobile phone
holder
[7] Indicator light &
Function Button
[8] micro USB charging port
[9] Grip
1
1.Install the Snoppa App
Scan the barcode below to download the Snoppa App, or
search for “Snoppa App” on the App Store or Google play,
and install the app on your mobile phone.
Snoppa App only support iOS 8.0 or later, and Android 5.0
or later.
2.Mobile phone set up
Unfold mobile phone holder
2
Mount the phone into the holder
range:
58-85mm
Make sure the phone is clamped in the middle
(Align to the center of gravity)
Notice: complicated phone
cases are not supported. They
may hinder the gimbal’s ability
to stabilize.
3
4
3.Turn on and turn o
A. With Snoppa App
Turn on the Bluetooth of the phone,
launch Snoppa App, click the Bluetooth
icon on the edge of the interface and
enter the Bluetooth setting.
Connect to SNOPPA－xxxx
Default password: 000000
To reset the password and device name,
press the button and hold for 10 seconds.
Once connected the green light on the
gimbal will start blinking, and the
Bluetooth icon will change and dispaly the
gimbal battery level.
Pull out the grip, rotate the
tilt-axis of the phone until the
intersection angle is more than
60 degree, and M1 will start to
work automatically.
Collapse the tilt-axis to the grip, quit Snoppa app,
and the gimbal will power o after 20 seconds
without any operation.
60
o
Power on
Power o
Notice: Please connect the Bluetooth of the gimbal in the Snoppa
App setting panel, instead of the mobile phone’s system setting panel.
Notice: Please avoid starting the gimbal without a phone
mounted on the holder. This may cause issues for the
gimbal.
B. Without Snoppa App
Power off
Twist 90˚ and
then pull out
(be careful of
pinching hand
when collapse
the handle).
Press & hold for 2 seconds until the indicator light goes o.
Rotate the tilt-axis
of the phone until
the intersection
angle goes more
than 60 degree.
60o
Press the indicator button,
when it ashes green,
press it again and hold it
until the gimbal starts up.
The indicator light will
show a constant green.
Indicator light/
Function button
CAUTION
PINCHING
HAND
Power on
Remind：Collapse the tilt-axis to the grip, the gimbal will enter
standby mode, and all the motors will stop working. Within 20
seconds of standby mode, motors can be reactivated by rotating
the tilt-axis down until the intersection angle goes larger
than 60 degree. After 20 seconds in standby mode, the
gimbal will power o automatically. After 30 minutes
without any operation in o mode, the Bluetooth will be
deactivated and cannot be found in the device list.
To reactivate it, short press the button and the indicator
will blink green.
5
4.Modes
Tracking Modes
Without Snoppa App you can press the indicator button to
switch tracking modes.
PAN TRACK
LOCK
OMNI TRACK
Pan track
Pan camera by moving the grip left or right.
Shoot in a xed direction no matter how the
grip moves.
Pan and tilt camera by moving the grip up &
down, left & right.
Omni track
tilt
pan
Hold the grip vertically, and
turn the phone 90 degree left
or right, and hold for one
second.
VERTICAL SHOOTING
Notice: it is important to choose the proper counterweight
which adapts to the mobile phone’s weight. Please refer to the
complete User Manual about how to choose the counterweight.
angle adjustment: Hold and rotate the mobile phone to the angle you want
and hold it for one second.
In Lock Mode, pan and tilt angle can be both adjusted manually.
In Pan Track and Omni Track modes, only tilt angle can be adjusted manually.
pan
6
5.Charging
6.Firmware upgrade
In order to get the best performance out of your gimbal, please
make sure it is upgraded with the latest rmware.
When the Snoppa app is launched a pop-up message will appear
on screen if a new rmware upgrade is available, prompting you
to update.
Make sure your smartphone has internet
access. Connect the gimbal with Snoppa
App by Bluetooth, enter the setting
menu, choose “Firmware Info”.
You can also manually check for and
upgrade to the new rmware when a
new upgrade is available.
BUILT-IN LI-PO BATTERY, WHICH IS IRREPLACEABLE
Charge the gimbal with a micro USB cable （connect
to a power bank or phone adapter or pc etc.）
When charging the gimbal, the indicator will ash
green, and will turn constant green when fully
charged.
USB
7
SPECIFICATIONS
ITEM
Model
Dimensions
Weight (battery included)
Controllable range
Mobile phone width range
Wireless
Runtime
BATTERY
Type
Capacity
Output voltage
Energy
Battery life
Charging temperature
Operating temperature
SPECS
SP-M1
Folded 208 x 53 x 43mm
Unfolded 266 x 53 x 43mm
450 g
Pan: 360˚ free rotation
Tilt: ±100°
Roll: 360˚ free rotation
58-85mm
Bluetooth Low Energy 4.0
4 Hours
Lipo
1050mAh
7.4V
7.8Wh
500cycles
0°~ 45°
-10°~ 45°
For more infomation, please download the User Manual on our website
(www.snoppa.com) .
The content is subjective to change without prior notice.
Copyright © 2017 Snoppa Technology. All Rights Reserved
8
[1] PAN Motor (Schwenken)
[2] TILT Motor (Neigen)
[3] Gegengewicht
[4] ROLL Motor (Rollen)
[5] 1/4" Fotogewinde
[6] Umklappbarer
Smartphone-Halter
[7] Statuslicht & Funktionstaste
[8] Mikro USB Ladebuchse
[9] Griff
VORWORT
[2]
[7]
[8]
[9]
[6]
[3]
[4]
[5]
[1]
Vielen Dank, dass Sie sich für den in drei Achsen stabilisierten
Snoppa M1 Gimbal entschieden haben, der vor allem für
Smartphones entwickelt wurde. Mit der fortschrittlichen
Dreiachs-Stabilisatortechnik von Snoppa und dem innovativen
Gehäusedesign kann er die Lage des Smartphones exakt
bestimmen und die internen, bürstenlosen Motoren steuern. So
gleicht der Snoppa M1 das natürliche Zittern bei freihändiger
Benutzung aus, um das Smartphone zu stabilisieren und Wackler
in Videos zu unterdrücken.
9
Autres manuels pour M1
2
Table des matières
Langues :
Autres manuels Snoppa Accessoires pour appareils photo
