Charging your headset
Insert the usb charging cable into use port of PC.
Connect charging cable with the charging port of headset
When the red light is on, the headset is charging .
When the red light is off, the headset is charging fully.
Re-connecting to Bluetooth device
A) Automatic connecting
Every time the headset is switched on ,it will connect to the nearest,and the last
connected device automatically .
When the headset is in standby mode and doesn’t connect to any device, short
press MFB button ,it will connect to last connected device automatically.
Specification
Support Bluetooth version
Build in rechargeable 380mAh lithium battery
2402MHz~2480MHz ISM Ban
-42dB(0dB=1V/Pa,1KHz)
Accessories User manual and usb cable
User manual and usb cable
WARNING
Read Safety Instructions Before Making Volume Changes
Safe use depends on exposure time and volume levels.
Volume at 80 dB(A), exposure should be limited to 40 hours/week. At 89 dB(A)
exposure should not exceed 5 hours/week.
The battery may present a risk of fire or chemical burn if it is not handled as it should.
Do not disassemble, incinerate and do not expose it to temperatures above 40°c.
Do not use the battery if you see a leakage, or if discoloured, deformed or if it has a defect.
Do not let your batteries discharged or unused for long periods.
If misused, batteries may explode or leak, resulting in damage and injury. If they leak, get rid of it
immediately with usual precautions.
