SMC Networks EZ-Connect SMCHP1D-ETH Manuel utilisateur
Copyright
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.
However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or
other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications
at any time without notice.
Copyright © 2004 by
SMC Networks, Inc.
38 Tesla
Irvine, CA 92618
All rights reserved.
Trademarks:
SMC is a registered trademark; and EZ Connect is a trademark of SMC Networks, Inc. Other product
and company names are trademarks or registered trademarks of their respective holders.
TABLE OF CONTENTS
CHAPTER 1 | Introduction
Features and Benefits
Package Contents
Minimum Requirements
CHAPTER 2 | Getting to Know the Powerline Adapter
LED Indicators
Resetting the Powerline Adapter
CHAPTER 3 | Getting Connected
Basic Installation Procedure
CHAPTER 4 | Installing EZ Configuration Utility
Windows 98SE/Me/2000/XP
Macintosh Computer
CHAPTER 5 | Using the EZ Configuration Utility
Launch the Utility
Utility Layout
CHAPTER 6 | Understanding the Information in the SMC EZ Configuration Utility
Device List
Rename Devices
Delete Devices
CHAPTER 7 | Add a Powerline Device
CHAPTER 8 | Setting a Network Password
CHAPTER 9 | Running the Diagnostic Wizard
CHAPTER 10 | Understand the Diagnostic Report
APPENDIX A | Technical Specifications
APPENDIX B | Compliances
APPENDIX C | Technical Support
CHAPTER 1 | Introduction
Congratulations on your purchase of an EZ Connect™ Powerline to Ethernet Desktop Adapter
(SMCHP1D-ETH). SMC is proud to provide you with a powerful yet simple communication device for
creating a Powerline network that to extend the range of your wired or wireless network.
Features and Benefits
•EZ Configuration Utility – Works on both Windows and Mac based PCs
•Plug and Play installation – works out of the box
•Extends the range of your wired or wireless network
•Save time and money by using existing home wiring – no need to run expensive CAT-5
cabling
•Ideal solution for connecting your Game Console system to the Internet to play online
games
Package Contents
Before installing the EZ Connect™ Powerline to Ethernet Desktop Adapter, verify that you have the
items listed under “Package Contents.” Also be sure that you have the necessary cabling. If any of
the items are missing or damaged, contact your local SMC distributor.
•EZ Connect™ Powerline to Ethernet Desktop Adapter
•Powerline Cord
•One CAT-5 Ethernet cable
•CD with User Guide and EZ Configuration Utility
•Quick Installation Guide
If possible, retain the carton and original packing materials in case there is a need to return the
product.
Minimum Requirements
•An Ethernet-enabled device, such as a PC or game console system.
•Windows or Mac-based PC to use the EZ Configuration Utility
•CD-ROM*
Note: A CD-ROM drive is only required if you want to install the EZ Configuration Utility from EZ
Install CD. This utility can also be downloaded from www.smc.com
CHAPTER 2 | Getting to Know the Powerline Adapter
The SMCHP1D-ETH EZ Connect Powerline to Ethernet Desktop Adapter is the perfect solution for
the home/office environment. This Powerline Adapter offers:
•1 – RJ-45 Ethernet Connection (LAN)
•1 – Powerline Connecter
•LEDs for network status and troubleshooting
Note: You will need at least two SMC Powerline devices to create a Powerline network.
LED Indicators
The Barricade includes LED indicators on the front panel that simplify installation and network
troubleshooting.
LED Label Color Activity
Power PWR Green Solid LED indicates that the unit is powered on
No LED light indicates the unit is powered off
HomePlug HP Green Solid LED indicates that a Powerline signal is detected
Blinking LED indicates traffic is being transmitted
No LED light indicates no Powerline signal is not detected
Ethernet ETH Green Solid LED indicates a good Ethernet connection is detected
Blinking LED indicates traffic is being transmitted
No LED light indicates an Ethernet connection is not detected
Resetting the Powerline Adapter
To reset the SMC EZ Connect Powerline Adapter you will need to use the EZ Configuration Utility to
reset the password to the default setting of [HomePlug].
CHAPTER 3 | Getting Connected
The EZ Connect Powerline to Ethernet Adapter is connected between the Ethernet port on your PC
and the Powerline Network. The Powerline network is automatically created once you plug in the
first Powerline Device.
Basic Installation Procedure
1. CONNECT the LAN
Connect an Ethernet cable from your PC to the Powerline to Ethernet Adapters RJ-45 LAN port
on the back on the device.
2. CONNECT the Powerline
Run the included Power cord from the Powerline connector on the Adapter to an available
power outlet in your home.
Note: For best performance, connect device directly to wall outlet. Do not connect to surge
protector power bar.
Power cord
connected to
Powerline Port
COMPUTER
connected to
LAN (ETH) Port
CHAPTER 4 | Installing EZ Configuration Utility
Windows 98SE/Me/2000/XP
The screen shots were taken on a Windows 2000 machines, but the same steps apply will apply for
Windows 98SE, Me, and XP.
To access the User Guide and install the EZ Configuration Utility just insert the CD into your CD-
ROM drive and the Auto-run splash screen will appear:
Note: If the CD does not Auto-Run you can click on your CD-ROM drive and double mouse-click on
the [SMCHP1D-ETH.exe] icon to launch this splash screen.
If you are using a Mac then please open the OSX or OS9 folder on the SMC EZ Install CD to access
the EZ Configuration Utility for those operating systems.
To install the utility, follow the steps below:
1. Click on the [Install EZ Configuration Utility] option on the splash screen (shown above)
2. On the SMC Logo screen, click the [Next] button to start.
3. Click the [Next] button again.
4. Accept the License Agreement, and click the [Next] button to continue.
5. Enter in the Username and Organization information and set access rights, then click the
[Next] button to continue.
6. Confirm the installation location, and then click the [Next] button to continue. Default install
location is: C:/Program Files/SMC.
Note: You can change the installation location by clicking the [Change…] button.
7. Confirm the Installation information. Then click the [Install] button to begin the process.
8. To complete the Installation click the [Finish] button.
9. When finished, you must restart your computer to finalize the installation. Click the [Yes]
button to reboot your PC.
When you computer finishing restarting, the installation is complete and you can now use this
utility to configure your Powerline network.
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels SMC Networks Adaptateur
SMC Networks
SMC Networks Tiger Card SMC10GPCIE-XFP Manuel utilisateur
SMC Networks
SMC Networks 2209USB/ETH Manuel utilisateur
SMC Networks
SMC Networks WUSBS-N3 Manuel utilisateur
SMC Networks
SMC Networks SMC2336W-AG Manuel utilisateur
SMC Networks
SMC Networks EZ Connect SMCBT-EDR Manuel utilisateur
SMC Networks
SMC Networks WCB-GM - annexe 2 Manuel utilisateur
SMC Networks
SMC Networks SMCWCB-N Manuel utilisateur
SMC Networks
SMC Networks EZ Connect SMC2602W Manuel utilisateur
SMC Networks
SMC Networks WUSB-G2 FICHE Manuel utilisateur
SMC Networks
SMC Networks SMCWCB-GM Manuel utilisateur
SMC Networks
SMC Networks EZ Connect SMC2662W Manuel utilisateur
SMC Networks
SMC Networks WUSB-G - annexe 1 Manuel utilisateur
SMC Networks
SMC Networks 2671W Manuel utilisateur
SMC Networks
SMC Networks EZ Connect Powerline SMCHPAV-ETH2 Manuel utilisateur
SMC Networks
SMC Networks SMCBT-EDR Manuel utilisateur
SMC Networks
SMC Networks WUSBS-N2 FICHE Manuel utilisateur
SMC Networks
SMC Networks SMCWUSB-N4 Manuel utilisateur
SMC Networks
SMC Networks HPAV-ETH2 - annexe 1 Manuel utilisateur
SMC Networks
SMC Networks SMCWUSBT-G Manuel utilisateur
SMC Networks
SMC Networks WUSBS-N2 FICHE Manuel utilisateur
