SmartRG SR808ac Manuel utilisateur

/ Gateway User Manual

Model: SR808ac

Release 1.1 April 2018

501 SE Columbia Shores Boulevard, Suite 500

Vancouver, Washington 98661 USA

+1 360 859 1780 / smartrg.com

Table of Contents

Welcome! 3

Purpose & Scope 3

Intended Audience 3

Getting Assistance 3

Disclaimer 3

Installing your Gateway 4

Getting Familiar with Your Gateway 5

LED Status Indicators 5

Connections 5

Logging in to Your Gateway's Interface 7

Status 8

Software 8

Connection 8

Security 9

Diagnostics 10

Ethernet 11

Statistics 12

Basic 13

Setup 13

DHCP 14

DDNS 16

Prerequisite 16

Backup 17

Advanced 18

Options 18

IP Filtering 20

MAC Filtering 21

Port Filtering 22

Forwarding 23

Port Triggers 25

DMZ Host 27

RIP Setup 28

Configuring RIPv2 for Cisco CMTS 29

ACL Setting 31

Service Control 32

Wireless 34

Radio 34

Primary Network 35

Guest Network 37

Appendix: FCC Statements 39

FCC Interference Statement 39

FCC Radiation Exposure Statement 39

FCC - PART 68 40

Ringer Equivalency Number Statement 40

IC CS-03 statement 40

Canada Statement 41

Revision History 42

Welcome!

Thank you for purchasing this SmartRG product.

SmartRG offers solutions that simplify the complex Internet ecosystem. Our solutions include hardware, software, applications,

enhanced network insights, and security delivered via a future-proof operating system. Based in the USA, SmartRG provides

local, proactive software development and customer support. We proudly offer the best, most innovative broadband gateways

available.

Learn more at www.SmartRG.com.

Purpose & Scope

This Gateway User Manual provides SmartRG customers with installation, configuration and monitoring information for their

SR808ac gateway.

Intended Audience

The information in this document is intended for Network Architects, NOC Administrators, Field Service Technicians and other

networking professionals responsible for deploying and managing broadband access networks. Readers of this manual are

assumed to have a basic understanding of computer operating systems, networking concepts and telecommunications.

Getting Assistance

Frequently asked questions are provided at the bottom of the Support page of the SmartRG Web site.

Subscribers: If you require further help with this product, please contact your service provider.

Service providers: if you require further help with this product, please open a support request.

The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system,

translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical,

photocopying, manual, or otherwise, without the prior written permission of SmartRG, Inc.

Disclaimer

SmartRG does not assume any liability arising out of the application or use of any products, or software described herein. Neither

does it convey any license under its patent rights nor patent rights of others. SmartRG further reserves the right to make

changes to any products described herein without notice. This publication is subject to change without notice.

Any trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective

owners.

Installing your Gateway

The connectors located on the back of the SR808ac gateway are described below (from top to bottom).

POWER

ON/OFF

CABLE

RESET WPS

LAN

USB

2 3

3G USB Data Card / LTE

1. Connect one end of the supplied cable to the port labeled Cable on the gateway.

2. Plug the power cord into the wall outlet and into the power jack on the back of the gateway. Turn on the unit by pressing

the On/Off button on the back of the gateway.

3. Connect one end of an Ethernet cable to a LAN port on the gateway. Connect the other end to your laptop.

Your gateway is now automatically being set up to connect to the Internet. Various LEDs on the front of the gateway will flash as

setup proceeds. When the DS and US LEDs glow steady blue and the Online LED glows steady white, the gateway is ready for use.

This process may take a few minutes to complete.

If you are unable to connect to the Internet, confirm that all cable connections are in place and the gateway’s power is turned

on.

Getting Familiar with Your Gateway

This section describes the gateway's lights, ports, and buttons to help you get familiar with the SR808ac model.

LED Status Indicators

Your SmartRG gateway has several indicator lights (LEDs) on its front. The following table

describes those LEDs.

Note: The POWER,DS,US and ONLINE LEDs may flash briefly when the gateway boots up.

Legend: White White blinking Blue Blue blinking

INDICATOR COLOR STATE DESCRIPTION

POWER White Gateway is powered on and operating normally.

White Gateway is ready to connect.

Connection is being set up.

Blue Connection is established and synchronization is accomplished.

Data is being transferred and synchronization is in progress.

ONLINE White Gateway is online and the gateway is ready for use.

Gateway is connecting to the network or is unable to connect.

2.4 GHz

5 GHz

WPS

White Device is powered on and the device operates normally.

Software is upgrading or data is being transferred.

Connections

The connectors located on the back of the SR808ac gateway are described below (from top to bottom).

Interface Description

USB USB port for connecting other USB storage devices.

LAN 4 - 1 RJ45 ports for connecting the gateway to a PC or another network device.

Reset The Reset button is in a small circular hole on the rear panel. Press the button for at least 1 second and then

release it. The system reboots and returns to the factory defaults.

Warning: Do not press the Reset button unless you want to clear the current settings.

Interface Description

WPS Button for activating WPS.

Cable RF cable port, for connecting HFC cable.

On/Off On/Off button.

Power Power interface, for connecting the power adapter.

Logging in to Your Gateway's Interface

To manually configure the SmartRG SR808ac gateway, you must log in to the gateway's embedded UI.

1. Open a Web browser on your computer.

2. Enter http://192.168.0.1 (the default IP address of the cable modem gateway) in the address bar. The login dialog box

appears.

3. Enter the user name and password. The default user name is admin. The default password is unique for each device (last

4 of MAC address + last 4 of serial number) and is located on the bottom of the gateway. It is recommended that you

change these default values after logging in to the gateway for the first time.

4. Click Log In. The Status > Connection page appears.

Status

In this section, you can review status data for software, connections, security, diagnostics, Ethernet speed, and gateway

statistics.

Software

On this page you can view information about the hardware and software versions, MAC address, serial number, system “up” time,

and network registration status.

In the top navigation bar, click Status and then click Software in the left menu. The Status > Software page appears, where you

can view detailed information about the software installed on your gateway.

If you need to upgrade the firmware on your gateway, instructions are provided in the Customer Portal in Upgrading or

Downgrading a DOCSIS Gateway.

Connection

On this page, you can view the status of the gateway's connectivity, boot state, and the current system time.

In the top navigation bar, click Status. The Status > Connection page appears. To refresh the information on this page, click your

web browser’s Refresh button.

Security

On this page, you can change a user's password and restore the factory default settings.

1. In the top navigation bar, click Status and then click Security in the left menu. The Status > Security page appears.

2. To change the security password:

a. In the Password Change User ID field, enter the ID for which you want to change the password. The user ID must

be 15 characters or less.

b. In the Current Password field, enter the current password.

c. In the New Password and Re-Enter New Password fields, enter the new password. Passwords must be 8 char-

acters or less.

d. Click Apply to save your changes. You do NOT have to restore factory defaults to change the password.

3. To restore factory defaults, click Yes and then click Apply. The gateway reboots.

4. To log back into the gateway after the factory defaults are restored, you must enter the factory default user name

(admin) and the password found on the Password label on the bottom of the unit.

Diagnostics

On this page, you can run the Ping and Traceroute utilities to trouble shoot network connectivity:

lPing allows you to check connectivity between the gateway and devices on the LAN.

lTraceroute allows you to map the network path from the gateway to a public host. When you select Traceroute from the

Utility list, the applicable fields appear.

1. In the top navigation bar, click Status and then click Diagnostics in the left menu. The Status > Diagnostics page appears.

2. To run either utility:

a. In the Utility field, select the utility that you want to run. Options are Ping and Traceroute. The default is Ping.

b. In the Target field, enter the IP address or name.

c. (Optional) Modify the parameters:

lFor a ping test, you can modify Ping Size,No. of Pings and Ping Interval.

lFor a Traceroute test, you can modify Max Hops,Data Size,Base Port and Resolve Host.

Autres manuels pour SR808ac

Table des matières

Autres manuels SmartRG Porte

SmartRG

SmartRG SR360n Manuel utilisateur

SmartRG

SmartRG SR808ac Manuel utilisateur

SmartRG

SmartRG SR905acv Manuel utilisateur

SmartRG

SmartRG DSL Wireless Manuel utilisateur

SmartRG

SmartRG SR516ac Manuel utilisateur

SmartRG

SmartRG SR555ac Manuel utilisateur

SmartRG

SmartRG SR516ac Manuel utilisateur

SmartRG

SmartRG SR616ac Manuel utilisateur

SmartRG

SmartRG SR501 Manuel utilisateur

SmartRG

SmartRG SR506n Manuel utilisateur

SmartRG

SmartRG SR550n Manuel utilisateur

SmartRG

SmartRG SR300n Manuel utilisateur

SmartRG

SmartRG SR515ac Manuel utilisateur

SmartRG

SmartRG SR505n Manuel utilisateur

SmartRG

SmartRG SR516ac Manuel utilisateur

SmartRG

SmartRG SR505n Manuel utilisateur

SmartRG

SmartRG SR10 Manuel utilisateur

SmartRG

SmartRG SR655AC Manuel utilisateur

SmartRG

SmartRG SR10 Manuel utilisateur

SmartRG

SmartRG SR360n Manuel utilisateur

SmartRG

SmartRG SR616ac Manuel utilisateur

SmartRG

SmartRG SR350n Manuel utilisateur

SmartRG

SmartRG SR570ac Manuel utilisateur

SmartRG

SmartRG SR905ac Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur