SMART Board 2000 series Manuel utilisateur

smarttech.com/docfeedback/171178

SMARTBoard 2000 series

Display

USER’S GUIDE

FOR SBD-2075

smarttech.com/kb/171178

Product registration

If you register your SMART product, we’ll notify you of new features and software upgrades.

Keep the following information available in case you need to contact SMART Support.

Serial number:

Date of purchase:

Trademark notice

SMARTBoard, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMARTTechnologiesULC in the U.S. and/or other

countries. All third-party product and company names may be trademarks of their respective owners.

translated into any language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to change

without notice and does not represent a commitment on the part of SMART.

This product and/or use thereof is covered by one or more of the following U.S. patents:

www.smarttech.com/patents

05/2017

smarttech.com/kb/171178

Important information

Failure to follow the installation instructions shipped with your SMART product could result in

personal injury and product damage which may not be covered by your warranty.

Do not open or disassemble the SMART product. You risk electrical shock from the high voltage

inside the casing. Opening the casing also voids your warranty.

Do not stand (or allow children to stand) on a chair to touch the surface of your SMART product.

Rather, mount the product at the appropriate height.

Do not climb (or allow children to climb) on a wall- or stand-supported SMART product. Climbing on

the SMARTproduct could result in personal injury or product damage.

Individuals under the age of 18 require adult supervision when using this SMART Product.

To reduce the risk of fire or electric shock, do not expose your SMART product to rain or moisture.

If your SMART product requires replacement parts, make sure the service technician uses

replacement parts specified by SMART Technologies or parts with the same characteristics as the

original.

Ensure that any cables extending across the floor to your SMART product are properly bundled

and marked to avoid a trip hazard.

Do not insert objects inside the cabinet ventilation holes, because they could touch dangerous

voltage points and cause electric shock, fire or product damage which may not be covered by

your warranty.

Do not place any heavy objects on the power cable. Damage to the cable could cause shock, fire

or product damage which may not be covered by your warranty.

Useonly extension cords and outlets into which this product’s polarized plug can be fully inserted.

Use the power cable provided with this product. If a power cable is not supplied with this product,

please contact your supplier. Use only power cables that match the AC voltage of the power outlet

and that comply with your country’s safety standards.

smarttech.com/kb/171178

If the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass fragments with

care when disposing of them.

Do not move or mount the display by connecting rope or wire to its handles. Because the display is

heavy, rope, wire or handle failure could lead to personal injury.

To prevent personal injury, do not attempt to mount or carry the interactive flat panel using your

own strength. Instead, use a lifting device with the included attachable eyebolts. The eyebolts are

not post-installation hardware.

Use only VESA®-approved mounting hardware.

Disconnect all power cables for your display from the wall outlet and seek assistance from

qualified service personnel when any of the following occurs:

lThe power cable or plug is damaged

lLiquid is spilled into the display

lObjects fall into the display

lThe display is dropped

lStructural damage such as cracking occurs

lThe display behaves unexpectedly when you follow operating instructions

smarttech.com/kb/171178

Regulatory information

This device complies with directive 2014/53/EU.

This device complies with class A of CISPR 32 and may cause radio interference in a residential

environment.

Canada statement

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the

following two conditions:

1. This device may not cause interference; and

2. This device must accept any interference, including interference that may cause undesired

operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and

compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and

compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter. This equipment should be installed and operated with a minimum distance of 20

centimeters between the radiator and your body.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential

for harmful interference to co-channel mobile satellite systems

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

1. l'appareil ne doit pas produire de brouillage;

2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS

102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne

sur l'exposition et la conformité de rf.

smarttech.com/kb/171178

Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre

antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum

de 20 centimètres entre le radiateur et votre corps.

les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une

utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de

satellites mobiles utilisant les mêmes canaux;

FCC warning

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instructions, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment

and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and

operated in accordance with provided instructions and the antenna(s) used for this transmitter must

be installed to provide a separation distance of at least 20 cm from all persons and must not be co-

located or operating in conjunction with any other antenna or transmitter. End-users and installers

must be provided with antenna installation instructions and consider removing the no-collocation

statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. this device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

i smarttech.com/kb/171178

Contents

Important information 3

Regulatory information 5

Canada statement 5

FCC warning 6

FCC Radiation Exposure Statement 6

Chapter 1 1

About the display 1

Turning on the display for the first time 2

Connecting to a network 2

Chapter 2 7

Using Screen Share 7

Using Input 15

Using settings 16

Using the OSD menu 20

Updating system software 24

Applying an automatic system software update manually 24

Updating system software manually 24

Appendix A 25

Troubleshooting the display’s software 25

Chapter 1

1 smarttech.com/kb/171178

Chapter 1

About the display

[Overview]

The SMARTBoard 2075 display is a 75" non-touch LED display with built-in screen sharing that

supports iOS, Android and Microsoft platforms. The 4K ultra-high-definition display serves as an

active collaboration hub between student and teacher devices to allow for greater levels of

student engagement. The SMARTBoard 2075 display is a cost-effective solution that offers

educators flexibility in their implementation of technology in classrooms for whole class and small

group collaboration.

Features

The display includes the following features

Feature Description

4K ultra high definition

Screen sharing apps

CHAPTER 1

2 smarttech.com/kb/171178

Turning on the display for the first time

Turn on the display after mounting it and connecting power and devices.

To turn on the display for the first time

(missing or bad snippet)

1. Select your preferred language, and then tap Next.

2. Select your country, and then tap Next.

3. Name the display, and then tap Next.

4. Set the date and time, and then tap Next.

5. If the display isn’t using a wired network connection, select a wireless network, and then tap

Next.

6. Tap Finish.

The Welcome screen appears.

Connecting to a network

You can connect the display to a network using either Wi-Fi or an Ethernet connection. Before you

do so, your organization’s network administrators need to configure the network for the display.

Configuring the network for the display

Network administrators need to configure the network so users can use the Screen Share app,

update the system software automatically over the air and enable the display to set the date and

time automatically.

Configuring the network for iQ functions

Network administrators need to configure the network so users can update the display’s firmware

and system software automatically over the air and to allow apps to function properly.

Table des matières

Autres manuels SMART Board Moniteur

SMART Board

SMART Board SBID-MX255-V4 Manuel du produit

SMART Board

SMART Board 8070i-SMP Manuel utilisateur

SMART Board

SMART Board SPNL-6065-V2 Manuel de l'opérateur

SMART Board

SMART Board QX Pro Series Manuel utilisateur

SMART Board

SMART Board SBID-7075 Manuel utilisateur

SMART Board

SMART Board SBID-MX165 Mode d’emploi

SMART Board

SMART Board SBID-6265S-P Manuel utilisateur

SMART Board

SMART Board MX Series Manuel utilisateur

SMART Board

SMART Board 6065 HD Manuel du produit

SMART Board

SMART Board SBID-7275R Manuel du produit

SMART Board

SMART Board 7000R Series Manuel utilisateur

SMART Board

SMART Board SPNL-4065 Manuel utilisateur

SMART Board

SMART Board 6000S Series Manuel utilisateur

SMART Board

SMART Board GX V2 Series Manuel utilisateur

SMART Board

SMART Board GX (V2) Series Manuel du produit

SMART Board

SMART Board 6000S Series Manuel utilisateur

SMART Board

SMART Board SBID-MX055-V3N-PW Manuel du produit

SMART Board

SMART Board GX V3 Series Manuel utilisateur

SMART Board

SMART Board 7000R Pro Series Manuel utilisateur

SMART Board

SMART Board 7000 series Manuel du produit

SMART Board

SMART Board 6000S Series Manuel du produit

SMART Board

SMART Board 6000S Pro Series Manuel utilisateur

SMART Board

SMART Board SBID-MX265 Manuel utilisateur

SMART Board

SMART Board SBID-6265S-C Manuel du produit

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation