SMART-AVI HDC-IR Manuel utilisateur

TECHNICAL SPECIFICATIONS WHAT’S IN THE BOX

IR-EYE

IR Frequency Range 30 KHz to 80 KHz

Capture Distance Up to 25’

Cable Connector 3.5 mm stereo jack

IR Signal Indicator Green LED

IR-EYE

IR Frequency Range 30 KHz to 80 KHz

Capture Distance Up to 10’

Cable Connector 3.5 mm stereo jack

IR Signal Indicator Red LED

OTHER

Power 12VDC 2A

Cable Link CAT5 568A or 568B

Dimensions 2.5” W x 2.5” D x 1.0” H

Weight .25 lb

Operating Temp. 0°C ~ 40°C / 32°F ~ 104°F

Storage Temp. -20°C ~ 70°C / -4°F ~ 158°F

Relative Humidity Up to 95%

PART NO. QTY DESCRIPTION

HDC-IR 2 IR CAT5 Point to Point

SM-LED 1 IR Emitter

SM-EYE 1 IR Eye (Optional)

PS12VDC2A 2 Power supply 12VDC2A

1 Quick Start Guide

DESIGNED

AND MADE

IN THE USA

NOTICE

The information contained in this document

is subject to change without notice. iPGARD

makes no warranty of any kind with regard

to this material, including but not limited to,

implied warranties of merchantability and

tness for a particular purpose. iPGARD

will not be liable for errors contained

herein, or for incidental or consequential

damages in connection with the furnishing,

performance, or use of this material. No

part of this document may be photocopied,

reproduced, or translated into another

language without the prior written consent

from iPGARD, Inc.

20170518

Toll Free: (888)-994-7427

Phone: (702) 800-0005

Fax: (702)-441-5590

WWW.iPGARD.COM

A full manual can be downloaded from

www.smartavi.com/hdc-ir/

HDC-IR

IR CAT5 Point to Point Extender

USES A SINGLE CAT5

TO BROADCAST IR

UP TO 1000FT AWAY(333M

Quick Start Guide

The HDC-IR range of products allow the

extension of Infra Red control signals using

single CAT5 UTP (category 5, unshielded

twisted pair) cable. The HDC-IR is the rst

product for this application.

• Uses easy to install, inexpensive CAT5

• Output reaches up to 1000 feet (300 m)

• Sends IR and Power signals over CAT5

• High ground loop immunity

• Built-in lightning, power surge and

transient protection

• Remote Units come with Buffered Outputs

• Compact Enclosure

• Optional power supply for remote unit

• Fully compliant with standard modulated

IR and the latest IRDA

• Fully transparent path for all protocols

and data transfers

• Bi-directional IR

• Supports any IR Remote Control

IR-EYE

IR-LED

INTRODUCTION

FEATURES

HARDWARE INSTALLATION

1. Connect the IR LED to the IR window on the source device.

2. Connect power supply to the unit. Observe LED lighting up indicating power present.

3. Connect IR LED to the IR window on the souce device.

4. Connect the IR Eye to the Receiver.

5. Observe LED lighting indicating power present.Connect the speakers to the Audio Out port.

6. Connect the transmitter to the receiver using Category 5 UTP cable (Purchased separately).

The CAT 5 UTP cable, if purchased in bulk, will be wired using 568A or 568B wiring standard.

7. Once connected, check that the power LEDs on both the receiver and the transmitter are

on, IR status LED is on and RX LED is ashing when Remote control is used indicating that

communication is in progress

CAT5

DVD Player DVD Player DVD Player

IR-In Out-1 Out-2 Out-3

HDC-IR

IR extender over Twisted Pair

HDC-IR

CONTROL

IR-In Out-1 Out-2 Out-3

HDC-IR

IR extender over Twisted Pair

HDC-IR

CONTROL

Autres manuels SMART-AVI Extenseur

SMART-AVI

SMART-AVI DPX-XT Series Manuel utilisateur

SMART-AVI

SMART-AVI USB-100 Manuel utilisateur

SMART-AVI

SMART-AVI SWP-T10 Manuel utilisateur

SMART-AVI

SMART-AVI SDX-2P Series Manuel utilisateur

SMART-AVI

SMART-AVI FVX-3000 Manuel utilisateur

SMART-AVI

SMART-AVI RDU-2P Manuel utilisateur

SMART-AVI

SMART-AVI USB2-Mini Manuel utilisateur

SMART-AVI

SMART-AVI FVX-3000-Pro Manuel utilisateur

SMART-AVI

SMART-AVI LDX-4P Manuel utilisateur

SMART-AVI

SMART-AVI HFX Manuel utilisateur

SMART-AVI

SMART-AVI FDX-M2U Manuel utilisateur

SMART-AVI

SMART-AVI HLX-500 Manuel utilisateur

SMART-AVI

SMART-AVI DPX-XT Manuel utilisateur

SMART-AVI

SMART-AVI USB2Mini Manuel utilisateur

SMART-AVI

SMART-AVI HDX-4000 Manuel utilisateur

SMART-AVI

SMART-AVI AR100 Manuel utilisateur

SMART-AVI

SMART-AVI FDX-500 Manuel utilisateur

SMART-AVI

SMART-AVI KLX-500-DUO Manuel utilisateur

SMART-AVI

SMART-AVI FDX-2500 Manuel utilisateur

SMART-AVI

SMART-AVI DFX-XT-2P Manuel utilisateur

SMART-AVI

SMART-AVI HDX-100 Manuel utilisateur

SMART-AVI

SMART-AVI LDX-2P Manuel utilisateur

SMART-AVI

SMART-AVI SDX Series Manuel utilisateur

SMART-AVI

SMART-AVI XTAV-TX Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur