SMAR FI303 Guide d'installation

FI 303ME

OPERATION & MAINTENANC

INSTRUCTIONS MANUAL

web: www.smar.com/contactus.asp

www.smar.com

Specifications and information are subject to change without notice.

Up-to-date address information is available on our website.

smar

Kpvtqfwevkqp"

KKK"

INTRODUCTION

The FI303 is from the first generation of Profibus PA devices. It is a converter mainly intended for

interface of a Profibus PA system to control valve or other actuators. The FI303 produces a 4-20 mA

output proportional to input received over the Profibus PA network. The digital technology used in

the FI303 enables an easy interface between the field and the control room and several interesting

features that reduce considerably the installation, operation and maintenance costs.

The FI303 is part of Smar's complete 303 line of Profibus PA devices.

Profibus PA, is not only a replacement for 4-20 mA or intelligent/smart transmitter protocols, it

contains much more.

The digital technology used in the FI303 enables the choice of several types of transfer functions, an

easy interface between the field and the control room and several interesting features that

considerably reduce the installation, operation and maintenance costs.

Some of the advantages of bi-directional digital communications are known from existing smart

transmitter protocols: Higher accuracy, multi-variable access, remote configuration and diagnostics,

and multi-dropping of several devices on a single pair of wires.

The system controls variable sampling, algorithm execution and communication so as to optimize

the usage of the network, not loosing time. Thus, high closed loop performance is achieved.

Using Profibus technology, with its capability to interconnect several devices, very large control

schemes can be constructed. In order too be user friendly the function block concept was

introduced.

The FI303, like the rest of the 303 family, has some Function Blocks built in, like Analog Output and

Transducer and Display Blocks.

The need for implementation of Fieldbus in small as well as large systems was considered

when developing the entire 303 line of Profibus-PA devices. They have common features

and can configured locally using a magnetic tool, eliminating the need for a configuration

tool or console in many basic applications.

Get the best result of the FI303 by carefully reading these instructions.

NOTE

In case of using Simatic PDM as the configuration and parameterization tool, Smar

recommends that the user does not apply the option "Download to Device". This function

can improperly configure the field device. Smar recommends that user make the use of the

option "Download to PG / PC" and then selecting the Device Menu, use the menus of the

transducer, function and display blocks acting specifically, according to each menu and

method for reading and writing.

HK525"/"Qrgtcvkqp"cpf"Ockpvgpcpeg"Kpuvtwevkqp"Ocpwcn"

KX"

NOTE

This Manual is compatible with version 3.XX, where 3 denote software version and XX software release. The

indication 3.XX means that this manual is compatible with any release of software version 3.

Waiver of responsibility

The contents of this manual abides by the hardware and software used on the current equipmen

version. Eventually there may occur divergencies between this manual and the equipment. The

information from this document are periodically reviewed and the necessary or identified corrections

will be included in the following editions. Suggestions for their improvement are welcome.

Warning

For more objectivity and clarity, this manual does not contain all the detailed information on the

product and, in addition, it does not cover every possible mounting, operation or maintenance

cases.

Before installing and utilizing the equipment, check if the model of the acquired equipment complies

with the technical requirements for the application. This checking is the user’s responsibility.

If the user needs more information, or on the event of specific problems not specified or treated in

this manual, the information should be sought from Smar. Furthermore, the user recognizes that the

contents of this manual by no means modify past or present agreements, confirmation or judicial

relationship, in whole or in part.

All of Smar’s obligation result from the purchasing agreement signed between the parties, which

includes the complete and sole valid warranty term. Contractual clauses related to the warranty are

not limited nor extended by virtue of the technical information contained in this manual.

Only qualified personnel are allowed to participate in the activities of mounting, electrical connection,

startup and maintenance of the equipment. Qualified personnel are understood to be the persons

familiar with the mounting, electrical connection, startup and operation of the equipment or othe

similar apparatus that are technically fit for their work. Smar provides specific training to instruct and

qualify such professionals. However, each country must comply with the local safety procedures,

legal provisions and regulations for the mounting and operation of electrical installations, as well as

with the laws and regulations on classified areas, such as intrinsic safety, explosion proof, increased

safety and instrumented safety systems, among others.

The user is responsible for the incorrect or inadequate handling of equipments run with pneumati

or hydraulic pressure or, still, subject to corrosive, aggressive or combustible products, since thei

utilization may cause severe bodily harm and/or material damages.

The field equipment referred to in this manual, when acquired for classified or hazardous areas, has

its certification void when having its parts replaced or interchanged without functional and approval

tests by Smar or any of Smar authorized dealers, which are the competent companies for certifying

that the equipment in its entirety meets the applicable standards and regulations. The same is true

when converting the equipment of a communication protocol to another. In this case, it is necessar

sending the equipment to Smar or any of its authorized dealer. Moreover, the certificates are

different and the user is responsible for their correct use.

Always respect the instructions provided in the Manual. Smar is not responsible for any losses

and/or damages resulting from the inadequate use of its equipments. It is the user’s responsibility to

know and apply the safety practices in his country.

Vcdng"Qh"Eqpvgpvu"

TABLE OF CONTENTS

UGEVKQP"3"/"KPUVCNNCVKQP"000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"303"

GENERAL............................................................................................................................................................................... 1.1

MOUNTING ............................................................................................................................................................................ 1.1

TOPOLOGY AND NETWORK CONFIGURATION ................................................................................................................. 1.4

INTRINSIC SAFETY BARRIER .............................................................................................................................................. 1.5

JUMPER CONFIGURATION .................................................................................................................................................. 1.5

POWER SUPPLY ................................................................................................................................................................... 1.5

INSTALLATION IN HAZARDOUS AREAS ............................................................................................................................. 1.6

EXPLOSION/FLAME PROOF................................................................................................................................................. 1.6

INTRINSICALLY SAFE ........................................................................................................................................................... 1.6

UGEVKQP"4"/"KQRGTCVKQP"00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"403"

FUNCTIONAL DESCRIPTION - ELECTRONICS REFER TO THE BLOCK DIAGRAM ......................................................... 2.1

UGEVKQP"5"/"EQPHKIWTCVKQP"000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"503"

HOW TO CONFIGURE A TRANSDUCER BLOCK................................................................................................................. 3.1

TERMINAL NUMBER ............................................................................................................................................................. 3.2

FUNCTIONAL DIAGRAM OF THE PROFIBUS PA TO CURRENT TRANSDUCER BLOCK ................................................. 3.2

PROFIBUS TO CURRENT CONVERTER TRANSDUCER BLOCK - PARAMETERS DESCRIPTION.................................. 3.2

PROFIBUS TO CURRENT CONVERTER TRANSDUCER BLOCK - PARAMETERS TABLE............................................... 3.4

CYCLIC CONFIGURATION.................................................................................................................................................... 3.5

HOW TO CONFIGURE THE ANALOG OUTPUT BLOCK .................................................................................................... 3.11

CURRENT TRIM................................................................................................................................................................... 3.17

VIA LOCAL ADJUSTMENT .................................................................................................................................................. 3.20

TRANSDUCER DISPLAY – CONFIGURATION ................................................................................................................... 3.21

DISPLAY TRANSDUCER BLOCK ........................................................................................................................................ 3.22

DEFINITION OF PARAMETERS AND VALUES................................................................................................................... 3.23

LOCAL ADJUST TREE – QUICK GUIDE ............................................................................................................................. 3.28

PROGRAMMING USING LOCAL ADJUSTMENT ................................................................................................................ 3.29

J1 JUMPER CONNECTIONS ............................................................................................................................................... 3.30

W1 JUMPER CONNECTIONS.............................................................................................................................................. 3.30

CYCLICAL DIAGNOSIS........................................................................................................................................................ 3.33

UGEVKQP"6"/"OCKPVGPCPEG"RTQEGFWTGU00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"603"

GENERAL............................................................................................................................................................................... 4.1

DISASSEMBLY PROCEDURE............................................................................................................................................... 4.2

REASSEMBLY PROCEDURE................................................................................................................................................ 4.3

INTERCHANGEABILITY......................................................................................................................................................... 4.3

ACCESSORIES AND RELATED PRODUCTS ....................................................................................................................... 4.3

SPARE PARTS LIST .............................................................................................................................................................. 4.4

UGEVKQP"7"/"VGEJPKECN"EJCTCEVGTKUVKEU"0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"703"

ORDERING CODE ................................................................................................................................................................. 5.2

CRRGPFKZ"C"/"EGTVKHKECVKQPU"KPHQTOCVKQP"000000000000000000000000000000000000000000000000000000000000000000000000000000000000"C03"

EUROPEAN DIRECTIVE INFORMATION..............................................................................................................................A.1

HAZARDOUS LOCATIONS GENERAL INFORMATION........................................................................................................A.1

HAZARDOUS LOCATIONS APPROVALS .............................................................................................................................A.2

IDENTIFICATION PLATE AND CONTROL DRAWING ..........................................................................................................A.5

CRRGPFKZ"D"⁄"UTH"⁄"UGTXKEG"TGSWGUV"HQTO"00000000000000000000000000000000000000000000000000000000000000000000000000000000000"D03"

RETURNING MATERIALS .....................................................................................................................................................B.2

HK525"/"Qrgtcvkqp"cpf"Ockpvgpcpeg"Kpuvtwevkqp"Ocpwcn"

XK"

Kpuvcnncvkqp"Hnqyejctv"

XKK"

Kpuvcnncvkqp"Hnqyejctv"

Was the converter

configured on the bench

to match the application?

Configure the engineering unit.

Configure the terminal(s)

and output scale(s) .

(Section 3 - Calibration)

Configure the LCD reading.

(Section 3 - Configuration)

Simulate the values in the

input according to output scale

and verify the signals of the

output current.

Fieldbus

4 a 20 mA

Start

Yes

Is the indication correct?

See section 4 - Maintenance

Install the converter on the field

following the instructions below.

Check the area classification

and its practices.

Install the (mechanically

and electrically) according to the

application after checking the best

position for the LCD

(Section 4 - Maintenance).

converter

Install the preferably

on wether-protected areas.

converter

Power-up the properly.

FI303 needs a external power supply

for supply the equipment .

converter

4 - 20 mA

Yes

HK525"/"Qrgtcvkqp"cpf"Ockpvgpcpeg"Kpuvtwevkqp"Ocpwcn"

XKKK"

Section 1

1.1

INSTALLATION

General

NOTE

The installation carried out in hazardous areas should follow the recommendations of the IEC60079-14

standard.

The overall accuracy of measurement and control depends on several variables. Although the

converter has an outstanding performance, proper installation is essential, in order to maximize its

performance.

Among all factors, which may affect converter accuracy, environmental conditions are the most

difficult to control. There are, however, ways of reducing the effects of temperature, humidity and

vibration.

Locating the converter in areas protected from extreme environmental changes can minimize

temperature fluctuation effects.

In warm environments, the converter should be installed to avoid, as much as possible, direct expo-

sure to the sun. Installation close to lines and vessels subjected to high temperatures should also be

avoided.

Use of sunshades or heat shields to protect the converter from external heat sources should be

considered, if necessary.

Humidity is fatal to electronic circuits. In areas subjected to high relative humidity, the O-rings for the

electronics cover must be correctly placed. Removal of the electronics cover in the field should be

reduced to the minimum necessary, since each time it is removed the circuits are exposed to the

humidity. The electronic circuit is protected by a humidity proof coating, but frequent exposures to

humidity may affect the protection provided. It is also important to keep the covers tightened in

place. Every time they are removed, the threads are exposed to corrosion, since painting cannot

protect these parts. Code-approved sealing methods on conduit entering the converter should be

employed.

Mounting Using the bracket, the mounting may be done in several positions, as shown on Figure 1.3 -

Dimensional Drawing and Mounting Positions.

For better visibility, the digital indicator may be rotated in steps of 90° (See the section Maintenance

Procedures).

Output Wiring

The output is in fact a current link. An external power source is therefore necessary. The FI303

controls the current in the loop. (See Figure 1.4 - Output Connections). The three channels have a

common ground for the external power supply.

The output load is limited by the voltage of the external power supply. Please refer to the load graph

to determine the maximum load.

On loss of power the output will be uncertain. If power is maintained, but communication is lost, the

output may be pre-configured to freeze or go to a safe value.

Electric Wiring

Access the wiring block by removing the Electrical Connection Cover. This cover can be locked

closed by the cover locking screw (See Figure 1.1 - Cover Locking). To release the cover, rotate the

locking screw clockwise.

FI303 - Operation and Maintenance Instruction Manual

1.2

Figure 1.1 - Cover Locking

Cable access to wiring connections is obtained by one of the two conduit outlets. Conduit threads

should be sealed by means of code-approved sealing methods. The unused outlet connection

should be plugged accordingly.

The wiring block has screws, on which terminal type fork or ring can be fastened, see Figure 1.2 -

Ground Terminals.

GROUND

TERMINAL

H1 BUS

COMUNICATION

TERMINALS

OUTPUT

TERMINALS 3 OUTPUT

GROUND

TERMINAL

Figure 1.2 - Ground Terminals

For convenience there are three ground terminals: one inside the cover and two externals, located

close to the conduit entries.

The FI303 uses the 31.25 kbit/s voltage mode option for the physical signaling. All other devices on

the same bus must use the same signaling. All devices are connected in parallel along the same

pair of wires.

Various types of Fieldbus devices may be connected on the same bus.

The FI303 is powered via the bus. The limit for such devices is according to the DP/PA coupler

limitations for one bus for non-intrinsically safe requirement. In hazardous area, the number of

devices may be limited by intrinsically safe restrictions, according to the DP/PA coupler and barriers

limitations.

Autres manuels pour FI303

Table des matières

Autres manuels SMAR Convertisseur de média

SMAR

SMAR FI303 Manuel

SMAR

SMAR FI302 Manuel

SMAR

SMAR IF302 Manuel

SMAR

SMAR FP302 Guide d'installation

SMAR

SMAR if303 Manuel

SMAR

SMAR HI302 Manuel utilisateur

SMAR

SMAR if303 Manuel

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur