User Manual Ver 1.0.2
Model No.: LP-150M-12, LP-150M-24
Features
Page 1
0/1-10V Constant Voltage LED Driver
● Dimming interface: 0-10V, 1-10V, 10V PWM, Resistor, AC Push-Dim
● Universal AC input / 100-277VAC
● 1 channel constant voltage output, Max. total output power 150W
● Built-in active PFC function: 0.98 Typ
● Synchronize on multiple number of LED drivers
● Over-heat / Over-voltage /Over-load / Short circuit protection
● Suitable for indoor LED lighting application
● 5 Year, 50,000hr warranty
Technical Parameters
LP-150M-12, LP-150M-24 0/1-10V Constant Voltage LED Driver
Applications
● Suitable for LED related xture or appliance which use LED light bar and LED tape (like LED Decoration or Advertisement devices).
● Ofce / Commercial / Domestic Lighting, Hotels, Retail and Display.
● Use for retrot upgrades & new luminaire designs.
Warranty
5 years
Short Circuit
Protection
Over Load
Protection
Over-heat
Protection
Synchronization
Digital
Dimming
Push-Dim
0/1-10V
Dimming
Output Voltage 12VDC
Output Current Max. 12.5A
Output Power
Dimming Range
PWM Frequency
Input Voltage Range
Frequency Range
Efficiency 92％/230VAC
Alternating Current 2A/100VAC, 0.75A/230VAC, 0.7A/277VAC
Inrush Current
Leakage Current
No Load Power 2W/100VAC, 2W/230VAC, 2.5W/277VAC
Over Load
Over Temperature
Woking Temperature
T-case Max
Working Humidity
Storage Temperature/Humidity
Temperature Coefficient
Vibration Resistance
Security Specifications
Withstand Voltage
Insulation Resistance
EMC Emission
EMC Immunity
Shut down the output Voltage, when the load>=110％～140％, auto recovers.,
Short Circuit
Protection
Environment
Safety&EMC
-20℃～50℃
90℃
0～100％
2000Hz
100～277VAC
50/60Hz
Output
Model
Input
＜5mA
Max. 150W
Cold start 71A at 230VAC
20％～90％RH, non-condensing
-40℃～80℃10％～95％RH,
±0.03％/℃ (0-50％)
10-500Hz, 2G, 6min/cycle X,Y,Z axes/2min,
IEC/EN61347-1, IEC/EN61347-2-13, GB19510.14
I/P-O/P: 3750VAC
I/P-O/P: 100MΩ/500VDC/25℃/70％RH
EN61000-4-2.3.4.5.6.8.11, EN61547
EN55015, EN61000-3-2 Class C, IEC61000-3-3
Ripple & Noise <=150mV 230/ VAC
IP Rating
Certications
IP20
CE
24VDC
Max. 6.25A
LP-150M-12
Power Factor >0.98/230VAC
L-N:1KV
Anti Surge
THD ＜5％/100VAC, ＜10％/230VAC@ half lood/277VAC@75%load
Startup time 2S/100VAC, 1S/230VAC
LP-150M-24
Over Voltage Shut down the output Voltage, when the Voltage>=110％～140％, re-powerontorecover
Shut down the output Voltage, re-powerontorecover
Shut down the output Voltage, re-powerontorecover
Mechanical Structures and Installations
310.00 mm
45.00 mm
30.00 mm
L
N
L1
Push DIM
LL1
Vo+
Vo
AC N input
AC L input
AC Push input
LED output -
LED output +
DIM
DIM +
0/1-10V input -
0/1-10V input +
Gross weight
Net weight
Dimming Curve
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
50 60 70 80 90 100
Brightness(%)
10 20 30 40
Gamma=1.6
AC Push dimming 0/1-10V dimming
100
90
80
70
60
50
40
30
20
10
5.0 6.0. 7.0 8.0 9.0 10.0
0/1-10V(V)
1.0 2.0 3.0 4.0
Gamma=1.6
PWM duty(%)
Installation precautions
Please do not stack the products.
The distance between two products should be ≥1m
so as not to affect heat dissipation and lifespan of the products.
≥1m
≥1m
≥1m
420g
450g
