SIMARINE SCQ25T Manuel utilisateur
S I M A R I N E ®
SCQ25T Digital Shunt and Tank Module
USER MANUAL
V2.0
EN
USER MANUAL
All rights reserved. No parts of this work may be reproduced in any form or by
any means - graphic, electronic, or mechanical, including photocopying,
recording, taping, or information storage and retrieval systems - without the
written permission of the publisher.
Products that are referred to in this document may be either trademarks and/or
registered trademarks of the respective owners. The publisher and the author
make no claim to these trademarks.
While every precaution has been taken in the preparation of this document, the
publisher and the author assume no responsibility for errors or omissions, or for
damages resulting from the use of information contained in this document or
from the use of programs and source code that may accompany it. In no event
shall the publisher and the author be liable for any loss of profit or any other
commercial damage caused or alleged to have been caused directly or indirectly
by this document.
SCQ25T Digital Shunt and Tank Module
© 2022 SIMARINE
EN
ENSCQ25T
Digital Shunt
and Tank
Module
EN
6. Troubleshooting
3
Table of Contents
1. Introduction ........................................................................... 5
2. Safety ..................................................................................... 7
3. Overview ................................................................................ 9
4. Installation ........................................................................... 11
4.1 Mounting ......................................................................................................... 12
4.2 Cables .............................................................................................................. 12
4.3 Connecting ..................................................................................................... 12
4.4 SCQ25T Connection ................................................................................... 13
5. Technical specifications ........................................................ 15
6. Troubleshooting ................................................................... 17
6.1 Shunt Sensors not visible .......................................................................... 18
6.2 Shunt/tank sensor is not visible on PICO ............................................ 18
6.3 Tank sensor is showing an empty tank ................................................ 18
Introduction
1
EN
1. Introduction
6
1. Introduction
The SCQ25T digital shunt module is Simarine’s most versatile module. It can
be used to measure voltages, currents, liquid levels
and temperatures.
SCQ25T has 4x 25 A integrated shunts, capable of measuring voltage up to
35 V DC and continuous current up to 25 A on
each shunt.
SCQ25T can measure temperature or liquid level such as water, fuel or any
other liquid. It comes with 4 integrated
resistance inputs operating from 0 ohm - 65 kohm and 3 integrated voltage
inputs, operating from 0 V - 32 V.
You can connect any tank or temperature sensor operating in this range.
SCQ25T also features a configurable alarm contact, which fires on specific
alarms. It can handle a maximum current 1A on maximum 30V DC. The alarm
is configurable via PICO’s device menu or PICO's mobile app menu.
Safety
2
EN
2. Safety
8
2. Safety
DISCLAIMER: Installation of Simarine electronics should be made by
electrical specialists with proper safety equipment. When working
with batteries you should wear protective clothing and eye protection.
CAUTION: Batteries contain acid, a corrosive, colorless liquid that will burn
your eyes, skin and clothing. Should the acid
come in contact with eyes, skin or clothing, wash the area with fresh water
for at least 15 minutes, and seek
medical support immediately.
CAUTION: Do NOT connect anything to a damaged battery. It could heat
up, catch fire or explode.
CAUTION: Lead-acid Batteries can generate explosive gases during
operation. Never smoke, allow flames or sparks near
the battery. Make sure to keep sufficient ventilation around the battery.
CAUTION: When working with a battery remove all personal metal items
like watches, rings, necklaces and bracelets.
Metal items in contact with the battery terminals might cause a short circuit
with a very high electric current, which may heat
up and melt nearby objects and cause severe burns.
Overview
3
EN
3. Overview
10
3. Overview
A - 4x shunt input
B - 4x shunt output
C - 1x Tank add-on: [4x resistance sensing input & 3x voltage sensing input]
D - 1x Alarm contact (optional and configurable via PICO menu or Simarine
App)
E -
Table des matières
Autres manuels SIMARINE Unité de contrôle
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
