SilverStone ECM20 Manuel utilisateur
ECM20
Converts one M.2 port (M key) into one PCI-E x4 interface
Converts a second M.2 port (B key) into SATA6G interface
Supports two M.2 SSD simultaneously
Includes optional low-profile expansion slot
No driver installation required
Dual M.2 to PCI-E x4
and SATA 6G adapter card
NO: G11224160
Warranty Information
This product has a limited 1 year warranty in North America, Europe, and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
purchaser.
5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.
Please visit http://www.silverstonetek.com for the latest updates.
Warranty terms & conditions
Additional info & contacts
SilverStone Technology in NorthAmerica may repair or replace defective product with refurbished product that is not new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All power supplies should be sent
back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMAprocedure with SilverStone Technology
in USA by first downloading the “USA RMAform for end-users” form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above “Warranty terms & conditions” for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
(standard international call charges apply)
Model Number
Interface
SSD Interface
Module Key
Note: ECM20’s 'M' key is for use only with PCI-E SSD, 'B' key is for use with only SATA SSD.
Note: B key SSD requires SATA 7 pin cable connected to motherboard to function.
SilverStone’s ECM20 is an adapter designed for users wanting to utilize or add speedy M.2 devices
such as SSD onto their existing PC or motherboard. In addition to supporting one M.2 device
(M key) to run via the super fast PCI-E interface at up to 39Gbps, a second M.2 slot (B key) is
available for connecting to a SATA III port for added storage potential. For users looking to have the
fastest data access speed on a desktop computer, the ECM20 is a must have.
Introduction
Specifications
Number of Drives
Support Type of M.2 SSD
Support Length of M.2 SSD
Operating system support
SST-ECM20
PCI Express X4 / SATA6Gbps
M.2 (NGFF)
SATA-based B key, PCI-E 4X-based M key
2
2230, 2242, 2260 and 2280
30mm, 42mm, 60mm, 80mm
Microsoft Windows, Mac OS X, Linux
e
e
a
p
t
e
r
c
ard
Installation Chart
STEP 1
Install SATA based SSD to “B key” based M.2 slot and secure with screws.
STEP 2
Connect ECM20’s SATA port to corresponding SATA port on the motherboard via 7pin SATA cable.
STEP 3
Insert ECM20 into the motherboard’s compatible PCI-E (x4 or above) slot.
Installieren Sie eine SATA-basiert SSD im „B-Schlüssel“-basierten
M.2-Steckplatz und sichern Sie sie mit Schrauben.
Connectez le port SATA de l' ECM20 au port SATA correspondant sur la
carte-mère via un câble SATA 7 pins.
Conecte el puerto SATA del ECM20 al correspondiente puerto
SATA en la placa base mediante el cable SATA de 7 pines.
Collegare la porta SATA di ECM20 alla corrispondente porta SATA sulla
scheda madre utilizzando un cavo SATA 7pin.
Соедините разъем SATA устройства ECM20 ссоответствующим
разъемом SATA на системной плате спомощью 7-контактного
SATA-кабеля.
將您的SATA線連接主機板SATA 埠與ECM20的SATA插槽
将您的SATA线连接主板SATA 埠与ECM20的SATA插槽 ECM20のSATAポートから7ピンSATAケーブル経由でマザーボードの対応する
SATAポートに接続します。
ECM20의 SATA 포트를 7 핀 SATA 케이블을 통해 마더보드의 해당
SATA 포트에 연결합니다.
เชื่อมต่อพอร์ต SATA ของ ECM20 เข้ากับพอร์ต SATA บนเมนบอร์ดด้วยสายเค
เบิล SATA 7 พิน
ไทย
Stecken Sie den ECM20 in den kompatiblen PCI-E-Steckplatz
(x4 oder höher) des Motherboards.
Insérez l' ECM20 dans un emplacement compatible PCI-e (4x et plus) de
la carte-mère.
Inserte el ECM20 en el zócalo PCI-E compatible de la placa base
(x4 o superior).
Inserire ECM20 nell’alloggio PCI-E (x4 o superiore) compatibile della
scheda madre.
Вставьте ECM20 вслот системной платы,совместимый со
стандартом PCI-E (x4 или выше).
將ECM20安裝於主機板上的PCI-E插槽
将ECM20安装于主板上的PCI-E插槽 ECM20をマザーボードのPCI-E(x4またはそれ以上)互換スロットに装着します。
ECM20을 마더보드의 호환되는 PCI-E (x4 이상) 슬롯에 끼웁니다. เสียบ ECM20 เข้ากับสล็อต PCI-E (x4 ขึ้นไป) ที่ใช้ด้วยกันได้ของเมนบอร์ด
ไทย
Installieren Sie eine SATA-basiert SSD im „B-Schlüssel“-basierten
M.2-Steckplatz und sichern Sie sie mit Schrauben.
Placez le SSD dans l'emplacement M.2 sur la « clé B » et fixez-le
définitivement grâce aux vis.
Instale el SSD basado en SATA en el zócalo M.2 “B” y fíjelo con
tornillos.
Installare SSD su base SATA su alloggi “B Key” su base M.2 e fissare
con viti.
Установите SSD-накопитель споддержкой SATA вслот интерфейса
M.2 споддержкой "ключа B" изакрепите его винтами.
安裝 M.2 SATA SSD於ECM20的插槽內，並鎖上螺絲固定。請注意，
此插槽必須插入“B Key” 的SATA SSD.
安装M.2 SATA SSD于ECM20的插槽内，并锁上螺丝固定。请注意，
此插槽必须插入“B Key” 的SATA SSD.
SATAベースSSDを“Bキー”ベースのM.2スロットに装着してネジで固定し
ます。
SATA 기반 SSD를 "B 키" 기반 M.2 슬롯에 설치하고 나사로
고정합니다.
ติดตั้ง SSD แบบ SATA ไปยังสล็อต M.2 แบบ “B คีย์” และยึดด้วยสกรู
ไทย
STEP 1
Install PCI-E based SSD to “M key” based M.2 slot and secure with screws.
Installieren Sie eine PCI-E-basiert SSD im „M-Schlüssel“-basierten
M.2-Steckplatz und sichern Sie sie mit Schrauben.
Placez le SSD dans l'emplacement M.2 sur la « clé M » et fixez-le
définitivement grâce aux vis.
Instale el SSD basado en PCI-E en el zócalo M.2 “M” y fíjelo con
tornillos.
Installare SSD su base PCI-E su alloggi “M Key” su base M.2 e fissare
con viti.
Установите SSD-накопитель споддержкой PCI-E вслот
интерфейса M.2 споддержкой "ключа M" изакрепите его
винтами.
安裝 M.2 PCIe SSD於ECM20的插槽內，並鎖上螺絲固定。請注意，
此插槽必須插入”M Key” 的PCIe SSD
安装M.2 PCIe SSD于ECM20的插槽内，并锁上螺丝固定。请注意，
此插槽必须插入”M Key” 的PCIe SSD
PCI-EベースSSDを“Mキー”ベースのM.2スロットに装着してネジで固定
します。
PCI-E 기반 SSD를 "M 키" 기반 M.2 슬롯에 설치하고 나사로
고정합니다.
ติดตั้ง SSD แบบ PCI-E ไปยังสล็อต M.2 แบบ “M คีย์” และยึดด้วยสกรู
ไทย
STEP 2
Insert ECM20 into the motherboard’s compatible PCI-E (x4 or above) slot.
Stecken Sie den ECM20 in den kompatiblen PCI-E-Steckplatz
(x4 oder höher) des Motherboards.
Insérez l' ECM20 dans un emplacement compatible PCI-e (4x et plus) de
la carte-mère.
Inserte el ECM20 en el zócalo PCI-E compatible de la placa base
(x4 o superior).
Inserire ECM20 nell’alloggio PCI-E (x4 o superiore) compatibile della
scheda madre.
Вставьте ECM20 вслот системной платы,совместимый со
стандартом PCI-E (x4 или выше).
將ECM20安裝於主機板上的PCI-E插槽
将ECM20安装于主板上的PCI-E插槽 ECM20をマザーボードのPCI-E(x4またはそれ以上)互換スロットに装着します。
ECM20을 마더보드의 호환되는 PCI-E (x4 이상) 슬롯에 끼웁니다. เสียบ ECM20 เข้ากับสล็อต PCI-E (x4 ขึ้นไป) ที่ใช้ด้วยกันได้ของเมนบอร์ด
ไทย
SATA Port
PCI-E Port
PCI-E Port
SATA Port
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels SilverStone Adaptateur
SilverStone
SilverStone MUA01 Manuel utilisateur
SilverStone
SilverStone FP510 Manuel utilisateur
SilverStone
SilverStone SST-EC02 Manuel utilisateur
SilverStone
SilverStone SDP11 Manuel utilisateur
SilverStone
SilverStone ECM24 Manuel utilisateur
SilverStone
SilverStone SST-ECM23 Manuel utilisateur
SilverStone
SilverStone SST-PP08B Manuel utilisateur
SilverStone
SilverStone SDP12 Manuel utilisateur
SilverStone
SilverStone ECD01 Manuel utilisateur
SilverStone
SilverStone AD120-DC Manuel utilisateur
