Silverline 4229 Manuel utilisateur

TECHNICAL DRAWINGS

Warning And Safety Measures

*This product designed for usage at home.

*Your products usage voltage is 220-240Volts ~ 50Hz.

*Grounded plug is used at your product’s electric network cable. This cable should definitely be plugged in a

grounded socket.

*All electrical networks should be set by a qualified electrician.

*Installation applied by unauthorized people may cause the product to operate at low performance, damage of

the product and accidents.

*Power supply cable should not be exposed to press or smash during montage. Network cordon should not be

placed near the cookers; it may cause fire if it melts.

*Do not plug into the socket before installation of the product is completed.

*Keep the plug at a reachable place so that you can unplug it in case of any danger.

*Do not touch the lamps when they are on for long time. Lamps may hurt your hands as they will be hot.

*Kitchen cooker hoods are designed

for

usage during normal and

horne-style

cooking.

lf it

is used for

other

purposes,

failure risk occurs and it will be out

warranty.

*Fellow applicable rules and directions

for

passing out outlet air. (This waming is

not valid

for

usage

without

chimney.)

*Fiaming foods should not be cooked

under

the

product.

*Start your product after you put

pot,

fry-pan

etc.

an the

hob. Otherwise high

temperature may cause

some parts of

your

product to

getdeformed.

*Before you take pot, fry-pan etc. from

the

hob

put their

Iids

on.

*Do not leave hat oil on the hob. Pots

that

have

hotoi

lin

them

maycause

selfignition.

*Pay attention to curtains and covers

during

cooking of meals like frying because oil

may

flare up.

*Make sure that filters are changed

convenience. Filtersthatare

not changed

appropriate time has

risk of causing fire

due

oil

that

will

be gathered

them.

*Donot use filter materials that are not

flame

resistent instead

of filter.

*Do not operate your product

without

filter; do not remove filters

when

the product is

on.

*ln case of flame, cut power of the

product

and the cooking appliances. (Cut power

the product by

uggi

it off the

socket).

*Your product may cause fire risk if

cleaning

notapplie

periodically.

*Cut power

of the

product before

maintenance

process. (Cut power of

the

device by

unplugging

it)

*When chimney hood and the

appliances

working with energy other than

electricity

are operated at the

same time,

negative

pressure in the room should not be

than 4 Pa (4x 10

bar)

*If there is an appliance working with fuel or gaseaus fuel at the same place with

your

hood, this appliance's exhaust should

isolated from its volume totally and

the appliance

should be hermetic

type.

*When chimney connection is applied

your product, use ducts of 150mm

120mm diameter. Duct connection

should

be as short as possible and should

include

few bends.

*Use "MAX 6 A" fuse at cooker

hood

installment

for you

security.

*lf power supply cable is damaged, this cable should be changed by its producer

its service agency or a

personnel who is

specialist at the same Ievel in order to prevent a dangerous

situation.

*Keep package materials away

from

children as they may be dangerous

for

them.

*Be sure that your child does not play with the praduct. Do not allow kids to use your product.

*ln case of flame, cut power of the cooker hood and the cooking appliances, cover the flame. Never use water

in order

extinguish

it.

*The appllance ls not to be used by chiIdren or persons with reduced

physical,

sensory or menta

capabilities,or

Iack of experience and

knowledge, unless

they

have

been given

supervision

instruction.

*After installation

of your product, distance

between

range hood and electrical hob should be at least

cm and gas hobs at least

75cm.

*Please pay attention when the product is operated at the same time with a product

which

operates

using air and fuel (for instance: heater water heater etc. which operates using

gas

diesel fuell coal or

wood)since

cooker hood may affect burning negatively as it directs the

air

out.

*This

warning

not valid

for

usage

withou

chimney.

Assembly of the device without motor.

*Attach the 200/150 mm plastic chimney is in your cooker hood.Figure 1.

*Fix the cooker hood to the cupboard. Be sure

that

when you draw out the slide set that the front

panel

doesnt gad to the cupboard

door. Figure 2

*Use the A,B,C,D screws which are in the mounting set and screw with screw-driver. Figure 3

*Attach the flexible chimney pipe. Figure 4.

*Combine product power supply cable and external motor unit’s supply cable and finish installlation after

wiring electrical connection.

Assembly of the motorised device

There are 4 outlet air chimney(1,2,3,4) on product. (Figure 5)

Remove chimney panel from product before mounting.

Fix the cooker hood to the cupboard. Be sure that when you draw out the slide set that the front panel does

not gap to the cupboard door.

Use the A,B,C,D screws which are in the mounting set to screw with screwdriver and fix the product. Figure 3

Attach chimney panel, power supply cable and outlet chimney pipe. Figure 6.

Usage of the product.

There is no control button on the product. Use only remote control.

Remote control button functions

1-Motor on/off startup to motor or switching off. Motor’s begining speed is 1. Motor speed shown by LED’s.

On first speed, first LED(left) lights.

2-For this button every push decreases one level to speed.

3-For this button every push increases one level to speed.

4-If you push lamp button when lighters off lamps will open.

Timer Functions

If you push “+” button for 2 seconds air cleaning will activate. Means motor continues same speed for 5

minutes,stops for 1 hour and runs for 5 minutes and it goes on.

A )Maintenance and Cleaning Process

*Disconnect electricity connection before maintenance and cleaning process.

*Periodically, maintenance and cleaning is need for products lifetime and performance.

* The grease filters absorb grease and dust during cooking to help keep the chimney hood clean inside, and

should be cleaned every 2-3 weeks.

* For without chimney usage there are carbon filters in product. they can not be able to clean or wash. Carbon

filters must change periodically. You can buy from authorised service.

*This cleaning must be periodic for your other furnitures safeties.

B )Cleaning device

*Disconnect electricity connection before maintenance and cleaning process.

*Do not clean with steam or any steam device.

*Do not use with unsuitable cleaning material they may change products color.

*Clean your product only inox surface cleaner and soft cloth. Dry your device after cleaning. For glass surface

only use glass cleaning material.

C )Taking Out Side Absorb Panel

For taking out side absorb panel pull front of left and right points down.

D ) Taking out metal filters

Press lock bolt to back and pull devices down and take out.

E ) Cleaning process

Metal filter should be washed once in a month with hot and soaped water or if possible at dishwasher(55C).

Take off metal cassette filter pressing on springy latches on end point. After cleaning do not replace before

it dries. Pay attention for not harming grates.

Metal filters may be washed in the dishwasher. Color of aluminum filters may change after several washings.

This is normal and it is not necessary to change the filters.

Before Contact The Technical Services

*Make sure that the product is plugged in and the electric fuse of the electric wiring is running.

*Check the front panel buttons. If it covered with pollution it can not work. Clean them periodically.

*If speed buttons does not work check buttons side and clean.

*If lighters does not work check plug socket and fuses, lighter button, lamps. Be careful and do not forget

unplug.

*If, having consulted the above diagnostic chart you are still unable to remedy the situation, please call the

service telephone number at the rear of this booklet.

Possible Failures And To Do’s Before Calling Technical Service

A ) Still not working

Check your products wired fuses and house network fuses.

Make sure that the product is plugged.

B )If device performance does not enough or makes noise when it works.

Is chimney diameter enough? (min 120.)

Are metal filters clean?

Pay attention if you use without chimney, carbon filters must under 6 month at work.

For provide air conditioning, ventilate your kitchen.

If devices permance does not enough call technical services.

Table des matières

Autres manuels Silverline hotte de ventilation

Silverline

Silverline 4170 Manuel utilisateur

Silverline

Silverline Ariel Downdraft Manuel utilisateur

Silverline

Silverline 3364 Manuel utilisateur

Silverline

Silverline 3159 Manuel utilisateur

Silverline

Silverline 4207 Manuel utilisateur

Silverline

Silverline 3411 Instructions d'installation et d'utilisation

Silverline

Silverline 1173 Instructions de montage

Silverline

Silverline 4265 Manuel utilisateur

Silverline

Silverline SUPREME 3412 Manuel d'utilisation

Silverline

Silverline Derwent Instructions de montage

Silverline

Silverline 4226 Manuel utilisateur

Silverline

Silverline 3129 Manuel utilisateur

Silverline

Silverline 1350 Manuel utilisateur

Silverline

Silverline 3170 EC Manuel utilisateur

Silverline

Silverline Osiris HO0018 006 Manuel utilisateur

Silverline

Silverline H10260 015 Manuel utilisateur

Silverline

Silverline H22160 009 Manuel utilisateur

Silverline

Silverline 3490 Manuel utilisateur

Silverline

Silverline Albion Instructions de montage

Silverline

Silverline 3129 Manuel utilisateur

Silverline

Silverline HO0020030 Manuel utilisateur

Silverline

Silverline HO0002 006 Manuel utilisateur

Silverline

Silverline 3420 Manuel utilisateur

Silverline

Silverline 2240 Manuel utilisateur

Manuels hotte de ventilation populaires d'autres marques

emmeti

emmeti RECUPA MED A-140 Mode d’emploi

Nibe

Nibe F135 Manuel utilisateur

Kuppersberg

Kuppersberg INTRO 60 Instructions d'installation et d'entretien

Zephyr

Zephyr Spruce AK9834BS Guide d'installation

Hisense

Hisense MH6INBG Manuel utilisateur

Miele

Miele DA 1255 Manuel utilisateur

Broan

Broan 46000 Manuel utilisateur

GE Profile PV977 Instructions originales

FALMEC

FALMEC FFRIA24W5FS Manuel utilisateur

Whirlpool

Whirlpool RH2600XL-1 SERIES Manuel utilisateur

Küppersbusch

Küppersbusch DX ISLA Manuel utilisateur

ETNA

ETNA AV360RVS Manuel utilisateur

JUNO

JUNO JDF603E6 Manuel utilisateur

Miele

Miele DA 6708 D Manuel utilisateur

Tricity Bendix

Tricity Bendix LE 150 Manuel

AEG

AEG X68163BV1 Manuel utilisateur

AEG

AEG 125 D Manuel utilisateur

Smeg

Smeg KSEV97X Manuel utilisateur