Silvercrest WIRELESS SOCKET SET Manuel utilisateur

WIRELESS SOCKET SET

FUNKSTECKDOSEN-SET

Bedienungs- und Sicherheitshinweise

IAN 284705

WIRELESS SOCKET SET

Operation and Safety Notes FJERNBETJENTE

STIKKONTAKTER

Brugs- og sikkerhedsanvisninger

GB Operation and Safety Notes Page 5

DK Brugs- og sikkerhedsanvisninger Side 15

DE Bedienungs- und Sicherheitshinweise Seite 25

Before reading, unfold the page containing the illustrations and familiarise yourself

with all functions of the device.

Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets

funktioner.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich

anschließend mit allen Funktionen des Gerätes vertraut.

Master

ON OFF

5GB

Table of contents

Legend of pictograms used.......................................................Page 6

Introduction............................................................................................Page 6

Proper handling............................................................................................Page 6

Scope of supply ...........................................................................................Page 6

Control elements ..........................................................................................Page 6

Technical data..............................................................................................Page 7

Safety

Safety advice................................................................................................Page 7

Safety instructions for batteries/rechargeable batteries ..........................Page 8

Setting up

Preparing the remote control.......................................................................Page 9

Setting up the remote- controlled socket.....................................................Page 9

Setting-up operation

Using the radio-controlled socket................................................................Page 10

Using the remote- control.............................................................................Page 11

Trouble-shooting...........................................................................................Page 11

Cleaning ....................................................................................................Page 12

Disposal.....................................................................................................Page 12

Guarantee and service

Guarantee ....................................................................................................Page 12

Service address............................................................................................Page 12

Declaration of conformity............................................................................Page 13

Manufacturer................................................................................................Page 13

6 GB

Legend of pictograms used/Introduction

Wireless Socket Set

 Introduction



Proper handling

The radio-controlled socket set is suitable

for switching electrical equipment on and

oﬀ by remote control. Any alterations to

this device are not in accordance with

regulations and could represent signiﬁ-

cant risk of accidents. The manufacturer

does not accept liability for any damage

caused through the device not being used

in accordance with the regulations. This

device is not intended for commercial use.



Scope of supply

After you have unpacked this set, please

check to make sure all the contents are

complete.

4 Remote controlled sockets

1 4-channel remote control

1 Button cell CR 2032, lithium 3 V

(for remote control)

1 Set of operating instructions



Control elements

Remote control (fig. A):

1Power indicator light

2Channel ON/OFF button Channel

A, B, C, D

3Master ON/OFF switch

4Battery compartment lid

Legend of pictograms used

Volt (AC voltage) Caution! Fire hazard!

Hertz (frequency)

Do not dispose of electric

appliances in household

rubbish!

Watt (eﬀective power) Improper battery disposal

harms the environment!

Observe warnings and

safety instructions! Micro-switch with contact

opening <3mm

Beware of electric shock!

Danger to life! EU-compliant

7GB

Introduction

Remote-controlled socket (fig. B):

5LED power indicator

6Child protection socket



Technical data

Wireless Socket Set

RC DP3 4001-A DK 3726

Remote control

RCT DS1 CR-A 3726:

Batteries:

CR 2032, lithium 3V

Frequency band: 433.05MHz -

434.79MHz

Radio frequency: 433.92MHz

Max. transmitting

power: 5 dBm

Licensing: The system is licensed

for general use, is

free of charge and

does not require

registration.

Range: Depending on the

circumstances approx.

40m under optimum

circumstances.

Radio-controlled sockets

RCR DP3 3711-A IP20 DK 3726:

Rated voltage: 230V~50Hz

Breaking capacity: 16A, 3,680W

Standby power

consumption: < 0,7W

Transmission

frequency: 433.92MHz

Advice: The radio-controlled sockets

each have a child protection socket 6,

which signiﬁcantly increases safety at home.

The contacts are protected in such a way

that children cannot stick needles or other

sharp objects into them and thus get an

electric shock. Nevertheless, please keep

the device out of the reach of children

at all times.

 Safety

Safety advice

Read these operating instructions and

safety advice carefully. Look at the dia-

gram page and familiarise yourself with

all functions of the device before start-

ing it up for the ﬁrst time.

Avoid danger to life from

electric shock!

Only connect the radio-controlled

sockets to earthed 230V~ domestic

sockets.

At all costs, avoid exposure to

damp and extreme temperatures.

Only use the radio-controlled sockets

in enclosed spaces. They are not

suitable for outdoor use.

Despite the child protection socket

6, please keep the device out of

the reach of children at all times.

Avoid overloading the device.

Overloading can cause a ﬁre hazard

or damage to the device. The maxi-

mum capacity is approx. 3,680W

per radio-controlled socket.

Please contact the service department

immediately operational faults arise.

8 GB

Introduction

Do not open the device on any ac-

count. All necessary repairs should

only be carried out by the service

department or a specialist electrical

workshop.

Before cleaning always disconnect

the device from the mains supply. In

this case always remove the radio-

controlled electrical outlet socket

from the mains wall socket and

remove all plugs from the device.

Do not have one radio-controlled

electrical outlet socket inserted

behind the other.

Do not use any additional child

protection devices for the radio-

controlled sockets. The connection

between the plug and the radio-

controlled socket could be impaired

and risk from overheating then arises.

The radio-controlled sockets already

have a child protection device which

prevents children from putting any

objects into the socket.

Ensure that the outlet is installed

close to the connected product, is

easily accessible and that the prod-

uct is not operated while covered.

If the device malfunctions, switch it

oﬀ immediately.

These instructions are a component

of the device. If you pass the device

on to a third party, these instructions

must also be handed on.

Do not switch the wireless sockets

erratically or unattended

Safety instructions

for batteries /

rechargeable

batteries

DANGER TO LIFE! Keep batter-

ies/rechargeable batteries out of

reach of children. If accidentally

swallowed seek immediate medical

attention.

DANGER OF EXPLO-

SION! Never recharge

non-rechargeable batter-

ies. Do not short-circuit batteries/

rechargeable batteries and/or

open them. Overheating, ﬁre or

bursting can be the result.

Never throw batteries/rechargea-

ble batteries into ﬁre or water.

Do not exert mechanical loads to

batteries/rechargeable batteries.

Risk of leakage of batteries /

rechargeable batteries

Avoid extreme environmental condi-

tions and temperatures, which could

aﬀect batteries/rechargeable bat-

teries, e.g. radiators/direct sunlight.

Avoid contact with the skin, eyes

and mucous membranes. In the

event of contact with battery acid,

thoroughly ﬂush the aﬀected area

with plenty of clean water and seek

immediate medical attention.

WEAR PROTECTIVE

GLOVES! Leaked or

damaged batteries/

rechargeable batteries can cause

burns on contact with the skin.

9GB

Introduction/Setting up

Wear suitable protective gloves at

all times if such an event occurs.

In the event of a leakage of batter-

ies/rechargeable batteries, imme-

diately remove them from the

product to prevent damage.

Only use the same type of batteries/

rechargeable batteries. Do not mix

used and new batteries/recharge-

able batteries.

Remove batteries/rechargeable

batteries if the product will not be

used for a longer period.

Risk of damage of the product

Only use the speciﬁed type of bat-

tery/rechargeable battery!

Insert batteries/rechargeable bat-

teries according to polarity marks

(+) and (-) on the battery/recharge-

able battery and the product.

Clean the contacts on the bat-

tery/rechargeable battery and

in the battery compartment before

inserting!

Remove exhausted batteries/

rechargeable batteries from the

product immediately.

 Setting up



Preparing the remote

control (ﬁg. A)

CAUTION! Danger of explosion in

the case of improper battery re-

placement. Only replace with the

same or equivalent battery type.

1. Open the battery compartment on

the back of the remote control by

turning the battery compartment

cover 4anti-clockwise with the

aid of a coin or a screwdriver, then

removing the lid (open).

2. Insert the round cell battery type

CR 2032. Make sure you ﬁt the

battery with the correct polarity

(+ = up).

3. Place the battery compartment

cover 4back on and lock it in

place by turning it in a clockwise

direction (close).

4. Press one of the ON/OFF buttons

2or 3to test whether the remote

control works; if it does, the power

indicator light will come on 1.



Setting up the remote-

controlled socket

1. Plug the remote-controlled socket

into an earthed household socket.

2. The LED operating status display 5

will now ﬂash slowly for approx.

30 seconds after plugging in.

3. Aim the remote control at the

remote-controlled socket at a

distance of approx. 50cm.

4. With the LED operating status dis-

play 5ﬂashing, press the desired

ON button of the channel ON/

OFF button 2(A, B, C or D) on

the remote control. The LED operat-

ing status display 5will now light

continuously. You can now use the

remote control to switch a con-

nected device on or oﬀ using.

10 GB

Setting up/Setting-up operation

5. Repeat this process with the other

remote-controlled socket.

Note: You can use one channel

ON/OFF button 2to switch sev-

eral remote-controlled sockets at

once. You can further train six re-

mote controls successively and use

these for a single receiver. This

means you can switch one appli-

ance on and oﬀ from up to six dif-

ferent places.

Note: In this case, synchronise

every remote-controlled socket with

the channel of the remote control.

Note: The codes for the remote

control will also remain stored

when changing the batteries.

Note: The codes will remain per-

manently stored when disconnect-

ing the remote-controlled socket

from the power supply.

Note: Avoid interference: Ensure

the various remote-controlled sock-

ets are approx. 50 cm apart.

Note: The LED operating status dis-

play 5indicates if the remote-con-

trolled socket is in ON/OFF mode.

Deleting a code:

To delete a code, ﬁrst repeat steps

1 – 3.

With the LED operating display 5

ﬂashing, press the desired OFF

button of the channel ON/OFF

button 2(A, B, C or D) you wish

to delete on the remote control.

The LED operating status display 5

will ﬂash rapidly for approx. 2 sec-

onds to conﬁrm deletion.

It will then ﬂash slowly again for

approx. 30 seconds and a new

code entered.

Deleting all codes:

To delete all codes, ﬁrst repeats

steps 1 – 3.

Then with the LED operating status

display 5ﬂashing, press the

ALL-OFF button 3on the remote

control. The LED operating status

display 5will ﬂash rapidly for

approx. 2 seconds to conﬁrm dele-

tion, then go out.

 Setting-up operation



Using the radio-controlled

socket (ﬁg. B)

1. Put the radio-controlled socket into

any shuttered socket and connect

the appliance you want to operate.

2. Switch the electrical appliance on.

The radio-controlled socket can

only perform its switching function

when the device to be controlled is

switched on.

ATTENTION! FIRE HAZARD!

Do not attach any appliances which

could cause ﬁres or other damaged

if left unattended when switched

on. The maximum load of every

radio-controlled socket is approx.

3,680W. Any overload could cause

a risk of ﬁre or damage to the device.

11GB

Setting-up operation



Using the remote-

control (ﬁg. A)

The remote control will control up to 4

remote-controlled sockets (individually,

in groups or simultaneously).

1. Press the desired ON button of the

channel ON/OFF button 2(A, B,

C or D) on the remote control of

the device you wish to switch on.

The LED operating status display 5

will light.

2. Press the desired OFF button of the

channel ON/OFF button 2(A,

B, C or D) on the remote control for

the device you wish to switch oﬀ.

The LED operating status display 5

will go out.

3. Conﬁrm the ALL ON/OFF button

3to switch all remote-controlled

sockets simultaneously.



Trouble-shooting

If the remote control does not

work, please check the follow-

ing points:

Prob-

lem

The operating indica-

tor 1on the remote

control device illumi-

nates but there is no

reaction

Rem-

edy

· Check if the battery still

has suﬃcient Ampere. If

necessary, install a new

battery.

Prob-

lem

No indicator light 1

on remote control

when pressing “ON”

or “OFF”

Rem-

edy

· Check if the battery is

inserted correctly.

· Check if the battery has

good contact, if necessary

press down

Prob-

lem

No reaction from

consumer

Rem-

edy

· Assign a new code to the

wireless socket (see “Set-

ting up the wireless socket”).

· Check - by walking closer to

it - that the range is correct

for the desired location.

Prob-

lem

Range is too small

Rem-

edy

· For large ranges, ensure

that as few walls and as

little furniture as possible

are in the way of the

remote control and the

radio-controlled socket.

· If the range is too small

at times, the reason could

be a remote control which

works on a similar fre-

quency. Whenever this re-

mote control is active, the

range declines (e.g. wire-

less headphones, radio-

controlled movement

alarms, radio gongs

etc.).

Autres manuels pour WIRELESS SOCKET SET

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Silvercrest Accessoires

Silvercrest

Silvercrest SWD 100 E2 Mode d’emploi

Silvercrest

Silvercrest SQWP8000 1A1 Manuel utilisateur

Silvercrest

Silvercrest SSHK 100 B2 Manuel utilisateur

Silvercrest

Silvercrest SAD 12 C3 Manuel utilisateur

Silvercrest

Silvercrest SSKB 2200 A1 Manuel utilisateur

Silvercrest

Silvercrest SFS 16 C3 Manuel utilisateur

Silvercrest

Silvercrest SPB 2.600 B1 Manuel utilisateur

Silvercrest

Silvercrest IAN 285279 Manuel utilisateur

Silvercrest

Silvercrest RCS AAA3680-A IP20 Manuel utilisateur

Silvercrest

Silvercrest SPB5.2 A1 Feuille d'instructions

Silvercrest

Silvercrest KH 206 Manuel utilisateur

Silvercrest

Silvercrest SADH A1 Manuel utilisateur

Silvercrest

Silvercrest 43150 Caractéristiques techniques

Silvercrest

Silvercrest STKK 16 B1 Manuel utilisateur

Silvercrest

Silvercrest SPB 5200 A1 Fiche d'information produit

Silvercrest

Silvercrest SPBS 5000 B2 Manuel utilisateur

Silvercrest

Silvercrest KH 1143 Manuel utilisateur

Silvercrest

Silvercrest STK 36 B2 Caractéristiques techniques

Silvercrest

Silvercrest 109820 Manuel utilisateur

Silvercrest

Silvercrest SFS 52 B2 Manuel utilisateur

Silvercrest

Silvercrest SPB 2600 C2 Manuel utilisateur

Silvercrest

Silvercrest 284705 Manuel utilisateur

Silvercrest

Silvercrest SWD 100 C2 Mode d’emploi

Silvercrest

Silvercrest SQWP8000 1A1 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur